{"title":"Belt Fastener Installation Tools","description":"\u003cp\u003eMATO installation tools for Plategrip, Riv-Nail, Steelgrip, and EasyClip belt fasteners. Complete tool kits (TK1, TK2, TK3), power punches, bolt breakers, wrenches, Riv-Nail drivers (manual, pneumatic, electric), and EasyFix staple installers.\u003c\/p\u003e","products":[{"product_id":"staplegrip-tool-ft-ps187-6-ft-ps187-6","title":"Staplegrip EasyFix Friction Tape FT-PS187-6 - Galvanized Steel 6\" Length for Size 187 Preset Staplegrip","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip EasyFix Friction Tape FT-PS187-6\u003c\/strong\u003e is a friction tape preset staplegrip strip in 6-inch length, sized for the 187 staplegrip system. Belts 3\/16 to 1\/4 inch thick, rated to 220 PIW. Galvanized Steel construction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 friction-tape preset staplegrip strip\u003c\/strong\u003e, 187 inches long\u003c\/li\u003e\n\u003cli\u003ePre-loaded staples in the strip\u003c\/li\u003e\n\u003cli\u003eFriction tape adhesive backing (preset)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is friction tape preset staplegrip:\u003c\/strong\u003e Friction tape preset staplegrip is a fastener strip that uses pre-loaded staples plus a friction-tape adhesive layer to create a hybrid mechanical-and-adhesive splice. The friction tape provides initial holding while the staples are driven, eliminating the need for a separate alignment jig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to install:\u003c\/strong\u003e Lay the friction tape preset strip across the belt end, press to engage the adhesive, then drive the preset staples with the EasyFix hammer-driver tool. The tape locks the splice during staple driving, preventing the strip from shifting on smooth or worn belt surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Steel provides the standard economical material for general industrial conveyors in dry to moderate environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCross-scored for any belt width:\u003c\/strong\u003e The strip is cross-scored so installers can break it by hand to fit any belt width without cutting tools. This 6-inch length covers most belt widths up to 6 inches.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693286707389,"sku":"FT-PS187-6","price":297.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_e0c2104b-9e47-47cd-ad82-d699d480a312.jpg?v=1778106078"},{"product_id":"staplegrip-tool-ft-ps62-24-ft-ps62-24","title":"Staplegrip EasyFix Friction Tape FT-PS62-24 - Galvanized Steel 24\" Length for Size 62 Preset Staplegrip","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip EasyFix Friction Tape FT-PS62-24\u003c\/strong\u003e is a friction tape preset staplegrip strip in 24-inch length, sized for the 62 staplegrip system. Belts 1\/16 to 1\/8 inch thick, rated to 115 PIW. Galvanized Steel construction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 friction-tape preset staplegrip strip\u003c\/strong\u003e, 62 inches long\u003c\/li\u003e\n\u003cli\u003ePre-loaded staples in the strip\u003c\/li\u003e\n\u003cli\u003eFriction tape adhesive backing (preset)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is friction tape preset staplegrip:\u003c\/strong\u003e Friction tape preset staplegrip is a fastener strip that uses pre-loaded staples plus a friction-tape adhesive layer to create a hybrid mechanical-and-adhesive splice. The friction tape provides initial holding while the staples are driven, eliminating the need for a separate alignment jig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to install:\u003c\/strong\u003e Lay the friction tape preset strip across the belt end, press to engage the adhesive, then drive the preset staples with the EasyFix hammer-driver tool. The tape locks the splice during staple driving, preventing the strip from shifting on smooth or worn belt surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Steel provides the standard economical material for general industrial conveyors in dry to moderate environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCross-scored for any belt width:\u003c\/strong\u003e The strip is cross-scored so installers can break it by hand to fit any belt width without cutting tools. This 24-inch length covers most belt widths up to 24 inches.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693286969533,"sku":"FT-PS62-24","price":1191.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_5d6c188b-ab2f-487b-a5f8-98bead7d2fd9.jpg?v=1778106076"},{"product_id":"staplegrip-tool-ft-ps62-12-ft-ps62-12","title":"Staplegrip EasyFix Friction Tape FT-PS62-12 - Galvanized Steel 12\" Length for Size 62 Preset Staplegrip","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip EasyFix Friction Tape FT-PS62-12\u003c\/strong\u003e is a friction tape preset staplegrip strip in 12-inch length, sized for the 62 staplegrip system. Belts 1\/16 to 1\/8 inch thick, rated to 115 PIW. Galvanized Steel construction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 friction-tape preset staplegrip strip\u003c\/strong\u003e, 62 inches long\u003c\/li\u003e\n\u003cli\u003ePre-loaded staples in the strip\u003c\/li\u003e\n\u003cli\u003eFriction tape adhesive backing (preset)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is friction tape preset staplegrip:\u003c\/strong\u003e Friction tape preset staplegrip is a fastener strip that uses pre-loaded staples plus a friction-tape adhesive layer to create a hybrid mechanical-and-adhesive splice. The friction tape provides initial holding while the staples are driven, eliminating the need for a separate alignment jig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to install:\u003c\/strong\u003e Lay the friction tape preset strip across the belt end, press to engage the adhesive, then drive the preset staples with the EasyFix hammer-driver tool. The tape locks the splice during staple driving, preventing the strip from shifting on smooth or worn belt surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Steel provides the standard economical material for general industrial conveyors in dry to moderate environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCross-scored for any belt width:\u003c\/strong\u003e The strip is cross-scored so installers can break it by hand to fit any belt width without cutting tools. This 12-inch length covers most belt widths up to 12 inches.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693287035069,"sku":"FT-PS62-12","price":595.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_5838f3cf-5fb0-4862-95b9-8e8c2b4fca73.jpg?v=1778106076"},{"product_id":"staplegrip-tool-ft-ps187-12-ft-ps187-12","title":"Staplegrip EasyFix Friction Tape FT-PS187-12 - Galvanized Steel 12\" Length for Size 187 Preset Staplegrip","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip EasyFix Friction Tape FT-PS187-12\u003c\/strong\u003e is a friction tape preset staplegrip strip in 12-inch length, sized for the 187 staplegrip system. Belts 3\/16 to 1\/4 inch thick, rated to 220 PIW. Galvanized Steel construction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 friction-tape preset staplegrip strip\u003c\/strong\u003e, 187 inches long\u003c\/li\u003e\n\u003cli\u003ePre-loaded staples in the strip\u003c\/li\u003e\n\u003cli\u003eFriction tape adhesive backing (preset)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is friction tape preset staplegrip:\u003c\/strong\u003e Friction tape preset staplegrip is a fastener strip that uses pre-loaded staples plus a friction-tape adhesive layer to create a hybrid mechanical-and-adhesive splice. The friction tape provides initial holding while the staples are driven, eliminating the need for a separate alignment jig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to install:\u003c\/strong\u003e Lay the friction tape preset strip across the belt end, press to engage the adhesive, then drive the preset staples with the EasyFix hammer-driver tool. The tape locks the splice during staple driving, preventing the strip from shifting on smooth or worn belt surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Steel provides the standard economical material for general industrial conveyors in dry to moderate environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCross-scored for any belt width:\u003c\/strong\u003e The strip is cross-scored so installers can break it by hand to fit any belt width without cutting tools. This 12-inch length covers most belt widths up to 12 inches.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693287067837,"sku":"FT-PS187-12","price":595.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_b75d3176-9e50-4b02-ba84-81e679f5c207.jpg?v=1778106075"},{"product_id":"staplegrip-tool-tp-62-6-tp-62-6","title":"Staplegrip Comb TP-62-6 - 6-Inch Comb for Size 62 Staplegrip","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip Comb TP-62-6 - 6-Inch Comb for Size 62 Staplegrip\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 Staplegrip Comb TP-62-6\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOperating instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e The TP-62-6 is a 6-inch alignment comb for the size 62 Traditional Staplegrip system. The comb teeth space the staples uniformly across the splice during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen and how to use:\u003c\/strong\u003e Use during Traditional Staplegrip installation: align the comb across the splice, set staples through the comb slots, then remove the comb after staple driving. The 6-inch length covers most field-splice setups.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693287133373,"sku":"TP-62-6","price":99.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-staplegrip-comb_39930175-05ed-47d8-aa26-60a7e56c9317.jpg?v=1778106075"},{"product_id":"staplegrip-tool-tp-187-6-tp-187-6","title":"Staplegrip Comb TP-187-6 - 6-Inch Comb for Size 187 Staplegrip","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip Comb TP-187-6 - 6-Inch Comb for Size 187 Staplegrip\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 Staplegrip Comb TP-187-6\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOperating instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e The TP-187-6 is a 6-inch alignment comb for the size 187 Traditional Staplegrip system. The comb teeth space the staples uniformly across the splice during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen and how to use:\u003c\/strong\u003e Use during Traditional Staplegrip installation for size 187 systems. Different from the smaller size combs in staple-spacing geometry, which matches the size 187 lacing pattern.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693287166141,"sku":"TP-187-6","price":99.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-staplegrip-comb_7380e2e2-856d-45c3-bb6f-c0b150b8d195.jpg?v=1778106005"},{"product_id":"staplegrip-tool-ft-ps125-6-ft-ps125-6","title":"Staplegrip EasyFix Friction Tape FT-PS125-6 - Galvanized Steel 6\" Length for Size 125 Preset Staplegrip","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip EasyFix Friction Tape FT-PS125-6\u003c\/strong\u003e is a friction tape preset staplegrip strip in 6-inch length, sized for the 125 staplegrip system. Belts 1\/8 to 3\/16 inch thick, rated to 180 PIW. Galvanized Steel construction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 friction-tape preset staplegrip strip\u003c\/strong\u003e, 125 inches long\u003c\/li\u003e\n\u003cli\u003ePre-loaded staples in the strip\u003c\/li\u003e\n\u003cli\u003eFriction tape adhesive backing (preset)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is friction tape preset staplegrip:\u003c\/strong\u003e Friction tape preset staplegrip is a fastener strip that uses pre-loaded staples plus a friction-tape adhesive layer to create a hybrid mechanical-and-adhesive splice. The friction tape provides initial holding while the staples are driven, eliminating the need for a separate alignment jig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to install:\u003c\/strong\u003e Lay the friction tape preset strip across the belt end, press to engage the adhesive, then drive the preset staples with the EasyFix hammer-driver tool. The tape locks the splice during staple driving, preventing the strip from shifting on smooth or worn belt surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Steel provides the standard economical material for general industrial conveyors in dry to moderate environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCross-scored for any belt width:\u003c\/strong\u003e The strip is cross-scored so installers can break it by hand to fit any belt width without cutting tools. This 6-inch length covers most belt widths up to 6 inches.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693287198909,"sku":"FT-PS125-6","price":297.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_9f7e5ec8-f11a-47e0-afe2-3399dd03b020.jpg?v=1778106005"},{"product_id":"staplegrip-tool-ft-ps187-24-ft-ps187-24","title":"Staplegrip EasyFix Friction Tape FT-PS187-24 - Galvanized Steel 24\" Length for Size 187 Preset Staplegrip","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip EasyFix Friction Tape FT-PS187-24\u003c\/strong\u003e is a friction tape preset staplegrip strip in 24-inch length, sized for the 187 staplegrip system. Belts 3\/16 to 1\/4 inch thick, rated to 220 PIW. Galvanized Steel construction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 friction-tape preset staplegrip strip\u003c\/strong\u003e, 187 inches long\u003c\/li\u003e\n\u003cli\u003ePre-loaded staples in the strip\u003c\/li\u003e\n\u003cli\u003eFriction tape adhesive backing (preset)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is friction tape preset staplegrip:\u003c\/strong\u003e Friction tape preset staplegrip is a fastener strip that uses pre-loaded staples plus a friction-tape adhesive layer to create a hybrid mechanical-and-adhesive splice. The friction tape provides initial holding while the staples are driven, eliminating the need for a separate alignment jig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to install:\u003c\/strong\u003e Lay the friction tape preset strip across the belt end, press to engage the adhesive, then drive the preset staples with the EasyFix hammer-driver tool. The tape locks the splice during staple driving, preventing the strip from shifting on smooth or worn belt surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Steel provides the standard economical material for general industrial conveyors in dry to moderate environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCross-scored for any belt width:\u003c\/strong\u003e The strip is cross-scored so installers can break it by hand to fit any belt width without cutting tools. This 24-inch length covers most belt widths up to 24 inches.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693287231677,"sku":"FT-PS187-24","price":1191.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_bae8b45f-fe84-464c-8920-06ca7cee515c.jpg?v=1778106005"},{"product_id":"staplegrip-tool-ft-ps62-6-ft-ps62-6","title":"Staplegrip EasyFix Friction Tape FT-PS62-6 - Galvanized Steel 6\" Length for Size 62 Preset Staplegrip","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip EasyFix Friction Tape FT-PS62-6\u003c\/strong\u003e is a friction tape preset staplegrip strip in 6-inch length, sized for the 62 staplegrip system. Belts 1\/16 to 1\/8 inch thick, rated to 115 PIW. Galvanized Steel construction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 friction-tape preset staplegrip strip\u003c\/strong\u003e, 62 inches long\u003c\/li\u003e\n\u003cli\u003ePre-loaded staples in the strip\u003c\/li\u003e\n\u003cli\u003eFriction tape adhesive backing (preset)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is friction tape preset staplegrip:\u003c\/strong\u003e Friction tape preset staplegrip is a fastener strip that uses pre-loaded staples plus a friction-tape adhesive layer to create a hybrid mechanical-and-adhesive splice. The friction tape provides initial holding while the staples are driven, eliminating the need for a separate alignment jig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to install:\u003c\/strong\u003e Lay the friction tape preset strip across the belt end, press to engage the adhesive, then drive the preset staples with the EasyFix hammer-driver tool. The tape locks the splice during staple driving, preventing the strip from shifting on smooth or worn belt surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Steel provides the standard economical material for general industrial conveyors in dry to moderate environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCross-scored for any belt width:\u003c\/strong\u003e The strip is cross-scored so installers can break it by hand to fit any belt width without cutting tools. This 6-inch length covers most belt widths up to 6 inches.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693287264445,"sku":"FT-PS62-6","price":297.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_26706021-6944-4e28-9cc8-c0ee318bc220.jpg?v=1778106005"},{"product_id":"staplegrip-tool-ft-ps125-12-ft-ps125-12","title":"Staplegrip EasyFix Friction Tape FT-PS125-12 - Galvanized Steel 12\" Length for Size 125 Preset Staplegrip","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip EasyFix Friction Tape FT-PS125-12\u003c\/strong\u003e is a friction tape preset staplegrip strip in 12-inch length, sized for the 125 staplegrip system. Belts 1\/8 to 3\/16 inch thick, rated to 180 PIW. Galvanized Steel construction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 friction-tape preset staplegrip strip\u003c\/strong\u003e, 125 inches long\u003c\/li\u003e\n\u003cli\u003ePre-loaded staples in the strip\u003c\/li\u003e\n\u003cli\u003eFriction tape adhesive backing (preset)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is friction tape preset staplegrip:\u003c\/strong\u003e Friction tape preset staplegrip is a fastener strip that uses pre-loaded staples plus a friction-tape adhesive layer to create a hybrid mechanical-and-adhesive splice. The friction tape provides initial holding while the staples are driven, eliminating the need for a separate alignment jig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to install:\u003c\/strong\u003e Lay the friction tape preset strip across the belt end, press to engage the adhesive, then drive the preset staples with the EasyFix hammer-driver tool. The tape locks the splice during staple driving, preventing the strip from shifting on smooth or worn belt surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Steel provides the standard economical material for general industrial conveyors in dry to moderate environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCross-scored for any belt width:\u003c\/strong\u003e The strip is cross-scored so installers can break it by hand to fit any belt width without cutting tools. This 12-inch length covers most belt widths up to 12 inches.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693287297213,"sku":"FT-PS125-12","price":595.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_a9844e72-796b-47bf-a51d-3d46e763a710.jpg?v=1778106005"},{"product_id":"staplegrip-tool-fp-2000-fp-2000","title":"Staplegrip Punch FP-2000","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip Punch FP-2000\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 Staplegrip Punch FP-2000\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOperating instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e The FP-2000 is a manual hand punch for installing Traditional Staplegrip lacing. Drives the loose staples through the lacing strip and belt fabric without requiring a separate hammer impact for each staple.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen and how to use:\u003c\/strong\u003e For Preset Staplegrip (where staples are pre-loaded into the strip), use the EasyFix tool instead. The FP-2000 is specifically for Traditional Staplegrip systems where staples are loaded one at a time.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693287329981,"sku":"FP-2000","price":77.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-staplegrip-punch_f45a5a1d-82c6-4774-bd3a-b0260e65c92e.jpg?v=1778106011"},{"product_id":"staplegrip-tool-125s","title":"Staplegrip Stainless Steel Staples 125S - 990 Staples per Box for Size 125 Belt Fastener","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip Stainless Steel Staples 125S\u003c\/strong\u003e is a box of 990 stainless steel staples for installing Traditional Staplegrip lacing strips on belts 1\/8 to 3\/16 inch thick. For the 125-size Staplegrip system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 Staplegrip Stainless Steel Staples 125S\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOperating instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat these are:\u003c\/strong\u003e Staples for hammer-driving Traditional Staplegrip lacing strips. Different from Preset Staplegrip (which has staples pre-loaded into the fastener strip), Traditional Staplegrip requires loose staples driven through the strip and belt at installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy stainless steel:\u003c\/strong\u003e Stainless staples resist corrosion in wash-down, food, and chemical environments. The staple stays sharp through extended belt operation and resists rust that would weaken the splice over time. Used with stainless or galvanized 125 Traditional Staplegrip strips.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow they install:\u003c\/strong\u003e Each staple is pre-positioned in the Traditional Staplegrip lacing slots, then driven 90 degrees to the belt pull direction with the EasyFix hammer driver tool. The 90-degree clinch direction makes it virtually impossible for the staple to open under load.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePack:\u003c\/strong\u003e 990 staples per box. One box typically supports 5 to 10 splices depending on belt width.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693287395517,"sku":"125S","price":152.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-staplegrip-staple-gun_2057bf6a-3349-4f9c-857a-cebcd42c5a21.jpg?v=1778106005"},{"product_id":"staplegrip-tool-tp-125-6-tp-125-6","title":"Staplegrip Comb TP-125-6 - 6-Inch Comb for Size 125 Staplegrip","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip Comb TP-125-6 - 6-Inch Comb for Size 125 Staplegrip\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 Staplegrip Comb TP-125-6\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOperating instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e The TP-125-6 is a 6-inch alignment comb for the size 125 Traditional Staplegrip system. The comb teeth space the staples uniformly across the splice during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen and how to use:\u003c\/strong\u003e Use during Traditional Staplegrip installation. Different from the TP-62-6 only in staple-spacing geometry, which matches the larger size 125 staples and lacing.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693287428285,"sku":"TP-125-6","price":99.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-staplegrip-comb_e4252965-2081-4c79-a593-d9b6fcaea501.jpg?v=1778106005"},{"product_id":"staplegrip-tool-ft-ps125-24-ft-ps125-24","title":"Staplegrip EasyFix Friction Tape FT-PS125-24 - Galvanized Steel 24\" Length for Size 125 Preset Staplegrip","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip EasyFix Friction Tape FT-PS125-24\u003c\/strong\u003e is a friction tape preset staplegrip strip in 24-inch length, sized for the 125 staplegrip system. Belts 1\/8 to 3\/16 inch thick, rated to 180 PIW. Galvanized Steel construction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 friction-tape preset staplegrip strip\u003c\/strong\u003e, 125 inches long\u003c\/li\u003e\n\u003cli\u003ePre-loaded staples in the strip\u003c\/li\u003e\n\u003cli\u003eFriction tape adhesive backing (preset)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is friction tape preset staplegrip:\u003c\/strong\u003e Friction tape preset staplegrip is a fastener strip that uses pre-loaded staples plus a friction-tape adhesive layer to create a hybrid mechanical-and-adhesive splice. The friction tape provides initial holding while the staples are driven, eliminating the need for a separate alignment jig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to install:\u003c\/strong\u003e Lay the friction tape preset strip across the belt end, press to engage the adhesive, then drive the preset staples with the EasyFix hammer-driver tool. The tape locks the splice during staple driving, preventing the strip from shifting on smooth or worn belt surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Steel provides the standard economical material for general industrial conveyors in dry to moderate environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCross-scored for any belt width:\u003c\/strong\u003e The strip is cross-scored so installers can break it by hand to fit any belt width without cutting tools. This 24-inch length covers most belt widths up to 24 inches.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693287461053,"sku":"FT-PS125-24","price":1191.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_15a179db-75a0-478b-912d-dc2beba6e6c3.jpg?v=1778106005"},{"product_id":"staplegrip-tool-62s","title":"Staplegrip Stainless Steel Staples 62S - 990 Staples per Box for Size 62 Belt Fastener","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip Stainless Steel Staples 62S\u003c\/strong\u003e is a box of 990 stainless steel staples for installing Traditional Staplegrip lacing strips on belts 1\/16 to 1\/8 inch thick. For the 62-size Staplegrip system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 Staplegrip Stainless Steel Staples 62S\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOperating instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat these are:\u003c\/strong\u003e Staples for hammer-driving Traditional Staplegrip lacing strips. Different from Preset Staplegrip (which has staples pre-loaded into the fastener strip), Traditional Staplegrip requires loose staples driven through the strip and belt at installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy stainless steel:\u003c\/strong\u003e Stainless staples resist corrosion in wash-down, food, and chemical environments. The staple stays sharp through extended belt operation and resists rust that would weaken the splice over time. Used with stainless or galvanized 62 Traditional Staplegrip strips.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow they install:\u003c\/strong\u003e Each staple is pre-positioned in the Traditional Staplegrip lacing slots, then driven 90 degrees to the belt pull direction with the EasyFix hammer driver tool. The 90-degree clinch direction makes it virtually impossible for the staple to open under load.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePack:\u003c\/strong\u003e 990 staples per box. One box typically supports 5 to 10 splices depending on belt width.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693287526589,"sku":"62S","price":152.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-staplegrip-staple-gun_fc430542-bd0e-4757-a5d3-b9c1c01c9e25.jpg?v=1778106021"},{"product_id":"staplegrip-tool-187s","title":"Staplegrip Stainless Steel Staples 187S - 990 Staples per Box for Size 187 Belt Fastener","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip Stainless Steel Staples 187S\u003c\/strong\u003e is a box of 990 stainless steel staples for installing Traditional Staplegrip lacing strips on belts 3\/16 to 1\/4 inch thick. For the 187-size Staplegrip system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 Staplegrip Stainless Steel Staples 187S\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOperating instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat these are:\u003c\/strong\u003e Staples for hammer-driving Traditional Staplegrip lacing strips. Different from Preset Staplegrip (which has staples pre-loaded into the fastener strip), Traditional Staplegrip requires loose staples driven through the strip and belt at installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy stainless steel:\u003c\/strong\u003e Stainless staples resist corrosion in wash-down, food, and chemical environments. The staple stays sharp through extended belt operation and resists rust that would weaken the splice over time. Used with stainless or galvanized 187 Traditional Staplegrip strips.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow they install:\u003c\/strong\u003e Each staple is pre-positioned in the Traditional Staplegrip lacing slots, then driven 90 degrees to the belt pull direction with the EasyFix hammer driver tool. The 90-degree clinch direction makes it virtually impossible for the staple to open under load.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePack:\u003c\/strong\u003e 990 staples per box. One box typically supports 5 to 10 splices depending on belt width.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693287592125,"sku":"187S","price":152.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-staplegrip-staple-gun_7f30088e-bf1b-4fa4-b441-6331649fd9c7.jpg?v=1778106005"},{"product_id":"staplegrip-tool-62rw","title":"Staplegrip Pin Retaining Washer 62RW - 50 per Pack for Size 62","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip Pin Retaining Washer 62RW\u003c\/strong\u003e is a pack of 50 retaining washers sized for size 62 Staplegrip belt fasteners. The washer prevents hinge pin migration during operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 Staplegrip Pin Retaining Washer 62RW\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOperating instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Staplegrip splices use a hinge pin threaded through the fastener loops to complete the splice. Belt tension and conveyor misalignment can cause the pin to migrate sideways outside the fastener loops. The retaining washer swages onto the end of the pin, blocking migration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to install:\u003c\/strong\u003e After threading the hinge pin through the fastener loops, place a retaining washer over each end of the pin. Compress the washer onto the pin with pliers or a swaging tool. The washer locks the pin in position permanently.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to use:\u003c\/strong\u003e Recommended for any Staplegrip installation where splice longevity matters. Especially valuable in: belts with extreme alignment changes, belts running close to pulley edges, conveyors with frequent reversing direction, and long-haul belts where pin migration would not be noticed promptly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePack:\u003c\/strong\u003e 50 washers per pack. Each splice uses 2 washers (one per pin end), so one pack supports 25 splices.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693287887037,"sku":"62RW","price":27.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-plategrip-top-plates_fd384cc0-29c6-4c55-adbd-4482457dd183.jpg?v=1778106005"},{"product_id":"staplegrip-tool-187rw","title":"Staplegrip Pin Retaining Washer 187RW - 50 per Pack for Size 187","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip Pin Retaining Washer 187RW\u003c\/strong\u003e is a pack of 50 retaining washers sized for size 187 Staplegrip belt fasteners. The washer prevents hinge pin migration during operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 Staplegrip Pin Retaining Washer 187RW\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOperating instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Staplegrip splices use a hinge pin threaded through the fastener loops to complete the splice. Belt tension and conveyor misalignment can cause the pin to migrate sideways outside the fastener loops. The retaining washer swages onto the end of the pin, blocking migration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to install:\u003c\/strong\u003e After threading the hinge pin through the fastener loops, place a retaining washer over each end of the pin. Compress the washer onto the pin with pliers or a swaging tool. The washer locks the pin in position permanently.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to use:\u003c\/strong\u003e Recommended for any Staplegrip installation where splice longevity matters. Especially valuable in: belts with extreme alignment changes, belts running close to pulley edges, conveyors with frequent reversing direction, and long-haul belts where pin migration would not be noticed promptly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePack:\u003c\/strong\u003e 50 washers per pack. Each splice uses 2 washers (one per pin end), so one pack supports 25 splices.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693288116413,"sku":"187RW","price":27.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-plategrip-top-plates_1a02d962-b801-4cfc-a282-e5fb90ec7671.jpg?v=1778106005"},{"product_id":"staplegrip-tool-sms125-stainless-steel","title":"Staplegrip Stainless Marker Strip SMS125 for Size 125","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip Stainless Marker Strip SMS125 for Size 125\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 Staplegrip Stainless Marker Strip SMS125 for Size 125\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOperating instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e The SMS125 is a stainless steel marker strip for the size 125 Staplegrip system. Provides a permanent stainless reference mark on the belt indicating splice location, maintenance date, or belt identification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen and how to use:\u003c\/strong\u003e Use for belts in inventory tracking systems or in installations where permanent splice marking aids future maintenance. Stainless construction resists corrosion in wash-down and chemical environments.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693288345789,"sku":"SMS125","price":184.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_a1ec2d7a-3c8b-4f53-bdbe-c2bb1bc0c3fd.jpg?v=1778105945"},{"product_id":"staplegrip-tool-15019-15019-221619","title":"Staplegrip Replacement Part 15019 - Specialty Component","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip Replacement Part 15019\u003c\/strong\u003e is a specialty replacement part for MATO Staplegrip and EasyClip Staplegrip systems. Available through Texas Belting as the authorized MATO distributor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 Staplegrip Replacement Part 15019\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOperating instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhen to order:\u003c\/strong\u003e Reference this part number when MATO documentation or your Staplegrip service manual specifies it. For installation tools or fastener sizing, the EST-KIT or FP-2000 punch may be more appropriate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed help with sizing or compatibility?\u003c\/strong\u003e Call Texas Belting at 888-203-2358 with your application details and we can verify whether 15019 is the correct part for your need.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693288444093,"sku":"15019","price":36.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-staplegrip-lacing-tool_185908b9-fe97-4cae-a5ce-f71bf9733f96.jpg?v=1778105946"},{"product_id":"staplegrip-tool-125rw","title":"Staplegrip Pin Retaining Washer 125RW - 50 per Pack for Size 125","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip Pin Retaining Washer 125RW\u003c\/strong\u003e is a pack of 50 retaining washers sized for size 125 Staplegrip belt fasteners. The washer prevents hinge pin migration during operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 Staplegrip Pin Retaining Washer 125RW\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOperating instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Staplegrip splices use a hinge pin threaded through the fastener loops to complete the splice. Belt tension and conveyor misalignment can cause the pin to migrate sideways outside the fastener loops. The retaining washer swages onto the end of the pin, blocking migration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to install:\u003c\/strong\u003e After threading the hinge pin through the fastener loops, place a retaining washer over each end of the pin. Compress the washer onto the pin with pliers or a swaging tool. The washer locks the pin in position permanently.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to use:\u003c\/strong\u003e Recommended for any Staplegrip installation where splice longevity matters. Especially valuable in: belts with extreme alignment changes, belts running close to pulley edges, conveyors with frequent reversing direction, and long-haul belts where pin migration would not be noticed promptly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePack:\u003c\/strong\u003e 50 washers per pack. Each splice uses 2 washers (one per pin end), so one pack supports 25 splices.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693288476861,"sku":"125RW","price":27.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-plategrip-top-plates_1c8a8a74-d2a6-483e-b8b9-5ac9339391e7.jpg?v=1778105946"},{"product_id":"belt-fastener-tool-estb-w5-11-32-11mm-wide-20-pack","title":"EasyFix Staplegrip Belt Tape ESTB-W5 - 3\/8\" (10 mm) Wide, 20-Pack","description":"\u003cp\u003e\u003cstrong\u003eEasyFix Staplegrip Belt Tape ESTB-W5\u003c\/strong\u003e is a 3\/8\" (10 mm) wide belt tape for use with the EasyFix Staplegrip installation system. Sold in 20-pack quantity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 roll of EasyFix Staplegrip Belt Tape\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e100-foot length\u003c\/li\u003e\n\u003cli\u003ePre-cut for the indicated staplegrip width\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e The belt tape provides initial adhesive holding during EasyFix Staplegrip installation, keeping the lacing strip aligned to the belt while staples are driven. After the staples are set, the tape becomes part of the splice assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to use:\u003c\/strong\u003e Required for EasyFix Staplegrip installation. The tape eliminates the need for a separate alignment jig and speeds installation by holding the splice in position hands-free during staple driving.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWidth selection:\u003c\/strong\u003e Match the tape width to the belt fastener size. Wider tape provides more adhesive contact area but adds slightly to the splice profile. The 3\/8\" width is correct for the size 187 EasyFix Staplegrip system.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46696603287741,"sku":"ESTB-W5","price":55.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_87540f96-2b27-47f5-8da4-e976613305a7.jpg?v=1778103966"},{"product_id":"belt-fastener-tool-bpc-1-0-bpc-1-0","title":"Battery-Powered Belt Cutter BPC-1.0 - 1.0\" Belt Capacity","description":"\u003cp\u003e\u003cstrong\u003eBattery-Powered Belt Cutter BPC-1.0 - 1.0\" Belt Capacity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 belt cutter tool\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eHardened steel blade\u003c\/li\u003e\n\u003cli\u003eErgonomic grip\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e The BPC-1.0 is MATO's battery-powered belt cutter for belts up to 1.0 inch (25 mm) thick. Cordless operation eliminates air-line setup, making it the right choice for remote work, mining tunnels, outdoor installations, and shops without compressed air.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen and how to use:\u003c\/strong\u003e Powered by a rechargeable battery (specifications in product literature). For belts thicker than 1 inch, use the APC-1.5 air-powered cutter instead. Replacement blades available (BPC-1.0 Blade).\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46696603353277,"sku":"BPC-1.0","price":5124.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_58c3ea20-3752-4177-bc9b-d297bd535ca5.jpg?v=1778103966"},{"product_id":"belt-fastener-tool-skcu-rat-drive-ratchet-skcu-rat","title":"Belt Skiver\/Cutter Accessory SKCU-RAT - Drive Ratchet","description":"\u003cp\u003e\u003cstrong\u003eBelt Skiver\/Cutter Accessory SKCU-RAT - Drive Ratchet\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 manual belt skiver\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eReplaceable cutting blade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it is:\u003c\/strong\u003e Replacement drive ratchet for SKCU hand belt skiver\/cutters. The ratchet translates the operator pull motion into blade advance along the guide rail.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to order:\u003c\/strong\u003e Order replacement parts during routine maintenance or when the SKCU performance degrades. Cutter blades, skiver blades, files, and ratchets all wear with use; periodic replacement keeps cuts clean and uniform.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible tools:\u003c\/strong\u003e All SKCU-series hand belt skivers and cutters (SKCU-36, SKCU-48, SKCU-54, SKCU-60, SKCU-72, SKCU-84). The accessory parts are common across all SKCU sizes.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46696603615421,"sku":"SKCU-RAT","price":88.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_ffcd70cd-4292-4c35-b86b-0e28855512f1.jpg?v=1778103966"},{"product_id":"belt-fastener-tool-apc-1-5-apc-1-5","title":"Air-Powered Belt Cutter APC-1.5 - 1.5\" Belt Capacity","description":"\u003cp\u003e\u003cstrong\u003eAir-Powered Belt Cutter APC-1.5 - 1.5\" Belt Capacity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 belt cutter tool\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eHardened steel blade\u003c\/li\u003e\n\u003cli\u003eErgonomic grip\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e The APC-1.5 is MATO's air-powered belt cutter for cutting rubber, fabric, PVC, and similar belting up to 1.5 inches (38.1 mm) thick. Compressed-air operation makes cutting fast, clean, and physically easy on the operator versus manual cutters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen and how to use:\u003c\/strong\u003e Includes a laser guide with batteries, belt marking pen, sharpening stone, two hex key wrenches, laser screwdriver, SL-8 spray lubricant, instruction manual, and tote bag. Air compressor required (sold separately). Replacement blades available (APC-1.5 Blade).\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46696603713725,"sku":"APC-1.5","price":4679.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_3588ab3e-4b13-4fef-9f2b-1939aae5980e.jpg?v=1778103966"},{"product_id":"belt-fastener-tool-c-48-cutter-guide-rail-c-48","title":"Hand Belt Cutter C-48 - 48\" Cutter with Guide Rail for Belt End Squaring","description":"\u003cp\u003e\u003cstrong\u003eHand Belt Cutter C-48\u003c\/strong\u003e is a hand-operated belt-cutter assembly with a 48-inch (1200 mm) guide rail for cutting belts square in field repair and shop work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 belt cutter tool\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eHardened steel blade\u003c\/li\u003e\n\u003cli\u003eErgonomic grip\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Combines a hand cutter blade with an aluminum guide rail that ensures the cut stays square across the full belt width. Pull the cutter handle along the rail in one smooth motion to produce a clean perpendicular belt edge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to use:\u003c\/strong\u003e Use this manual cutter when the working environment lacks compressed air or convenient battery power, or for occasional belt cuts where a powered cutter is overkill. Lighter and more portable than the APC-1.5 air-powered or BPC-1.0 battery-powered cutters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing:\u003c\/strong\u003e The 48-inch rail handles belts up to 48 inches wide. For wider belts, choose a longer C-series cutter or use the air-powered APC-1.5 (handles belts up to 1.5 inches thick across the full width).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReplacement blades:\u003c\/strong\u003e Order C-BLADE for replacement cutting blades.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46696604008637,"sku":"C-48","price":769.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-belt-cutter_49af25ff-d3f4-4b6f-a653-d81f3db42efc.jpg?v=1778103908"},{"product_id":"belt-fastener-tool-estb-w6-7-8-22mm-wide-20-pack","title":"EasyFix Staplegrip Belt Tape ESTB-W6 - 1\/2\" (12 mm) Wide, 20-Pack","description":"\u003cp\u003e\u003cstrong\u003eEasyFix Staplegrip Belt Tape ESTB-W6\u003c\/strong\u003e is a 1\/2\" (12 mm) wide belt tape for use with the EasyFix Staplegrip installation system. Sold in 20-pack quantity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 roll of EasyFix Staplegrip Belt Tape\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e100-foot length\u003c\/li\u003e\n\u003cli\u003ePre-cut for the indicated staplegrip width\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e The belt tape provides initial adhesive holding during EasyFix Staplegrip installation, keeping the lacing strip aligned to the belt while staples are driven. After the staples are set, the tape becomes part of the splice assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to use:\u003c\/strong\u003e Required for EasyFix Staplegrip installation. The tape eliminates the need for a separate alignment jig and speeds installation by holding the splice in position hands-free during staple driving.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWidth selection:\u003c\/strong\u003e Match the tape width to the belt fastener size. Wider tape provides more adhesive contact area but adds slightly to the splice profile. The 1\/2\" width is correct for the size 187 EasyFix Staplegrip system.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46696604041405,"sku":"ESTB-W6","price":55.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_90467520-55a6-45f7-b0e0-5f4010192b36.jpg?v=1778103908"},{"product_id":"belt-fastener-tool-bpc-1-0-blade-bpc-1-0-blade","title":"Battery-Powered Belt Cutter Replacement Blade BPC-1.0 Blade","description":"\u003cp\u003e\u003cstrong\u003eBattery-Powered Belt Cutter Replacement Blade BPC-1.0 Blade\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eReplacement cutter blades\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eSized for the matching belt cutter or skiver tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Replacement blade for the BPC-1.0 battery-powered belt cutter. Replace when cuts become ragged or chipped.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen and how to use:\u003c\/strong\u003e Keep at least one spare blade per shop. Blade life varies by belt material; aramid reinforced belts wear blades fastest.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46696604074173,"sku":"BPC-1.0 Blade","price":124.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-cutter-replacement-blades_c8f10889-85c5-43fc-a2ed-175ed6fe0b9c.jpg?v=1778103908"},{"product_id":"belt-fastener-tool-skcu-cbk1-cutter-blade-kit-skcu-cbk1","title":"Belt Skiver\/Cutter Accessory SKCU-CBK1 - Cutter Blade Kit","description":"\u003cp\u003e\u003cstrong\u003eBelt Skiver\/Cutter Accessory SKCU-CBK1 - Cutter Blade Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 electric belt skiver tool\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eReplaceable cutting blades\u003c\/li\u003e\n\u003cli\u003ePower cord and accessories\u003c\/li\u003e\n\u003cli\u003eCarrying case\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it is:\u003c\/strong\u003e Replacement cutter blade kit for SKCU hand belt skiver\/cutters. Includes multiple cutter blades for the cut-square function (different from skiver blades).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to order:\u003c\/strong\u003e Order replacement parts during routine maintenance or when the SKCU performance degrades. Cutter blades, skiver blades, files, and ratchets all wear with use; periodic replacement keeps cuts clean and uniform.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible tools:\u003c\/strong\u003e All SKCU-series hand belt skivers and cutters (SKCU-36, SKCU-48, SKCU-54, SKCU-60, SKCU-72, SKCU-84). The accessory parts are common across all SKCU sizes.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46696604139709,"sku":"SKCU-CBK1","price":106.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-belt-cutter_8d69cabe-29fb-42ca-a3ca-039630806ee1.jpg?v=1778103908"},{"product_id":"belt-fastener-tool-c-60-cutter-guide-rail-c-60","title":"Hand Belt Cutter C-60 - 60\" Cutter with Guide Rail for Belt End Squaring","description":"\u003cp\u003e\u003cstrong\u003eHand Belt Cutter C-60\u003c\/strong\u003e is a hand-operated belt-cutter assembly with a 60-inch (1500 mm) guide rail for cutting belts square in field repair and shop work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 belt cutter tool\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eHardened steel blade\u003c\/li\u003e\n\u003cli\u003eErgonomic grip\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Combines a hand cutter blade with an aluminum guide rail that ensures the cut stays square across the full belt width. Pull the cutter handle along the rail in one smooth motion to produce a clean perpendicular belt edge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to use:\u003c\/strong\u003e Use this manual cutter when the working environment lacks compressed air or convenient battery power, or for occasional belt cuts where a powered cutter is overkill. Lighter and more portable than the APC-1.5 air-powered or BPC-1.0 battery-powered cutters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing:\u003c\/strong\u003e The 60-inch rail handles belts up to 60 inches wide. For wider belts, choose a longer C-series cutter or use the air-powered APC-1.5 (handles belts up to 1.5 inches thick across the full width).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReplacement blades:\u003c\/strong\u003e Order C-BLADE for replacement cutting blades.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46696604172477,"sku":"C-60","price":869.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-belt-cutter_982b6ba3-467c-4c60-95fb-f373647c12be.jpg?v=1778103908"},{"product_id":"belt-fastener-tool-skcu-60-skcu-60","title":"Belt Skiver and Cutter SKCU-60 - 60\" (1500mm) Hand-Operated for Belt Splice Preparation","description":"\u003cp\u003e\u003cstrong\u003eBelt Skiver and Cutter SKCU-60\u003c\/strong\u003e is a hand-operated belt-end preparation tool for 60-inch (1500 mm) belt widths. Used to make square, clean cuts and uniform-thickness skiving cuts before installing mechanical fasteners or preparing a belt for vulcanizing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 manual belt skiver\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eReplaceable cutting blade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Two functions in one tool. First, it cuts the belt square across its full width, ensuring the splice ends meet flush. Second, it skives (thins down) one or both belt ends to a uniform thickness, which is required for the splice to seat properly with mechanical fasteners or hot vulcanizing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to use:\u003c\/strong\u003e Position the belt under the cutter with proper alignment. Set the depth (for skiving) or full-cut blade (for cutting). Push the cutter handle along the 60-inch rail in a single smooth motion. The guide rail keeps the cut straight and the depth uniform across the entire belt width.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to use:\u003c\/strong\u003e Required for any field belt splicing job. Typical applications include conveyor belt repair at quarries, mines, plants, and construction sites where vulcanizing equipment is unavailable or impractical. Also used in shop environments before sending repaired belts back to the field.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing note:\u003c\/strong\u003e Choose the SKCU length to match your widest belt. The 60-inch SKCU handles belts up to 60\" wide. For belts wider than 60\", select a longer SKCU. For motorized cutting on the same belt sizes, see the APC-1.5 air-powered or BPC-1.0 battery-powered belt cutters.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46696604238013,"sku":"SKCU-60","price":5896.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_511f0c68-359c-4432-ab8d-83a604ba45ca.jpg?v=1778103908"},{"product_id":"belt-fastener-tool-estb-w4-5-16-8mm-wide-20-pack","title":"EasyFix Staplegrip Belt Tape ESTB-W4 - 5\/16\" (8 mm) Wide, 20-Pack","description":"\u003cp\u003e\u003cstrong\u003eEasyFix Staplegrip Belt Tape ESTB-W4\u003c\/strong\u003e is a 5\/16\" (8 mm) wide belt tape for use with the EasyFix Staplegrip installation system. Sold in 20-pack quantity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 roll of EasyFix Staplegrip Belt Tape\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e100-foot length\u003c\/li\u003e\n\u003cli\u003ePre-cut for the indicated staplegrip width\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e The belt tape provides initial adhesive holding during EasyFix Staplegrip installation, keeping the lacing strip aligned to the belt while staples are driven. After the staples are set, the tape becomes part of the splice assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to use:\u003c\/strong\u003e Required for EasyFix Staplegrip installation. The tape eliminates the need for a separate alignment jig and speeds installation by holding the splice in position hands-free during staple driving.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWidth selection:\u003c\/strong\u003e Match the tape width to the belt fastener size. Wider tape provides more adhesive contact area but adds slightly to the splice profile. The 5\/16\" width is correct for the size 125 EasyFix Staplegrip system.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46696604303549,"sku":"ESTB-W4","price":55.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_b723fb7f-e65e-4bbe-a241-7e5f4e7efe64.jpg?v=1778103908"},{"product_id":"belt-fastener-tool-skcu-54-skcu-54","title":"Belt Skiver and Cutter SKCU-54 - 54\" (1350mm) Hand-Operated for Belt Splice Preparation","description":"\u003cp\u003e\u003cstrong\u003eBelt Skiver and Cutter SKCU-54\u003c\/strong\u003e is a hand-operated belt-end preparation tool for 54-inch (1350 mm) belt widths. Used to make square, clean cuts and uniform-thickness skiving cuts before installing mechanical fasteners or preparing a belt for vulcanizing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 manual belt skiver\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eReplaceable cutting blade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Two functions in one tool. First, it cuts the belt square across its full width, ensuring the splice ends meet flush. Second, it skives (thins down) one or both belt ends to a uniform thickness, which is required for the splice to seat properly with mechanical fasteners or hot vulcanizing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to use:\u003c\/strong\u003e Position the belt under the cutter with proper alignment. Set the depth (for skiving) or full-cut blade (for cutting). Push the cutter handle along the 54-inch rail in a single smooth motion. The guide rail keeps the cut straight and the depth uniform across the entire belt width.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to use:\u003c\/strong\u003e Required for any field belt splicing job. Typical applications include conveyor belt repair at quarries, mines, plants, and construction sites where vulcanizing equipment is unavailable or impractical. Also used in shop environments before sending repaired belts back to the field.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing note:\u003c\/strong\u003e Choose the SKCU length to match your widest belt. The 54-inch SKCU handles belts up to 54\" wide. For belts wider than 54\", select a longer SKCU. For motorized cutting on the same belt sizes, see the APC-1.5 air-powered or BPC-1.0 battery-powered belt cutters.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46696604336317,"sku":"SKCU-54","price":5601.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_5ddf69fb-1d68-4ab2-9299-5d591e992856.jpg?v=1778103908"},{"product_id":"belt-fastener-tool-rtbs-1","title":"Rough Top Belt Skiver RTBS-1","description":"\u003cp\u003e\u003cstrong\u003eRough Top Belt Skiver RTBS-1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 manual belt skiver\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eReplaceable cutting blade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e The RTBS-1 is a specialty hand skiver designed specifically for \"rough top\" belts - belts with raised friction surface patterns on the top cover used in package handling, incline conveyors, and grain handling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen and how to use:\u003c\/strong\u003e Standard skivers tear or skip on rough-top textures. The RTBS-1 has a curved blade profile that follows the contour of the rough-top pattern, producing a clean uniform skive without damaging the friction-side surface.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46696604401853,"sku":"RTBS-1","price":46.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_6c5188f3-7464-4899-890e-e689fefc65d0.jpg?v=1778103908"},{"product_id":"riv-nail-tool-rndp-max-sds-max-drive-rod-rndp-max","title":"Riv-Nail Drive Rod RNDP-MAX - SDS-Max Drive Rod for Heavy Hammers","description":"\u003cp\u003e\u003cstrong\u003eRiv-Nail Drive Rod RNDP-MAX - SDS-Max Drive Rod for Heavy Hammers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 RNDP heavy-duty SDS drive rod\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with rotary hammers (Bosch, Hilti, etc.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRotary hammer NOT included.\u003c\/strong\u003e Use with a 1-1\/8\" SDS-Plus or SDS-Max rotary hammer for high-volume Riv-Nail installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e The RNDP-MAX is an SDS-Max format drive rod for use with heavy-duty rotary hammers. SDS-Max delivers more impact energy than standard SDS, making it the choice for heavy-duty production splicing or thick rubber belts requiring extra clinching force.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen and how to use:\u003c\/strong\u003e Drive rod only. Hammer not included. Compatible 10-amp, 2,800 BPM SDS-Max-format rotary hammers deliver 5.6 ft-lbs of impact energy.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46696604434621,"sku":"RNDP-MAX","price":101.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-rndp-max-drive-rod_3ca54091-4005-4070-a162-6610f91c87a1.jpg?v=1777916083"},{"product_id":"belt-fastener-tool-c-12-cutter-guide-rail-c-12","title":"Hand Belt Cutter C-12 - 12\" Cutter with Guide Rail for Belt End Squaring","description":"\u003cp\u003e\u003cstrong\u003eHand Belt Cutter C-12\u003c\/strong\u003e is a hand-operated belt-cutter assembly with a 12-inch (300 mm) guide rail for cutting belts square in field repair and shop work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 belt cutter tool\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eHardened steel blade\u003c\/li\u003e\n\u003cli\u003eErgonomic grip\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Combines a hand cutter blade with an aluminum guide rail that ensures the cut stays square across the full belt width. Pull the cutter handle along the rail in one smooth motion to produce a clean perpendicular belt edge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to use:\u003c\/strong\u003e Use this manual cutter when the working environment lacks compressed air or convenient battery power, or for occasional belt cuts where a powered cutter is overkill. Lighter and more portable than the APC-1.5 air-powered or BPC-1.0 battery-powered cutters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing:\u003c\/strong\u003e The 12-inch rail handles belts up to 12 inches wide. For wider belts, choose a longer C-series cutter or use the air-powered APC-1.5 (handles belts up to 1.5 inches thick across the full width).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReplacement blades:\u003c\/strong\u003e Order C-BLADE for replacement cutting blades.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46696604467389,"sku":"C-12","price":509.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-belt-cutter_6b057e86-77ca-4eef-ad4b-ec58a9e8d377.jpg?v=1778103908"},{"product_id":"riv-nail-tool-apow-ap-oiler-wrench-apow","title":"Riv-Nail Air-Powered Accessory APOW - Air-Powered Oiler Wrench","description":"\u003cp\u003e\u003cstrong\u003eRiv-Nail Air-Powered Air-Powered Oiler Wrench\u003c\/strong\u003e (APOW) is a component or accessory for the MATO RNAPD air-powered Riv-Nail driver system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 bottle of air-powered tool oil\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eFor inline oilers on RNAPD and similar pneumatic tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it is:\u003c\/strong\u003e Specialty wrench for installing and removing the APO in-line oiler. Sized to fit oiler housing fittings without slipping.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen you need this:\u003c\/strong\u003e Replacement parts and accessories help maintain the RNAPD air-powered system through extended use. Air-powered Riv-Nail drivers are the fastest installation method available, capable of \"drive and set\" operation on up to 5 rivets at a time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible tools:\u003c\/strong\u003e All RNAPD air-powered driver kits and the AP series of accessories. The complete RNAPD-Kit includes one air-powered driver, two RNAPD-5 rivet drivers, in-line oiler, hose, regulator, oil, oiler wrench, coil puller, and storage box.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46696604500157,"sku":"APOW","price":40.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_80cab539-95c9-4856-8cbc-cdf89dfaceef.jpg?v=1778103907"},{"product_id":"belt-fastener-tool-bk-200","title":"Belt Knife with Blade BK-200","description":"\u003cp\u003e\u003cstrong\u003eBelt Knife with Blade BK-200\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 belt cutter tool\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eHardened steel blade\u003c\/li\u003e\n\u003cli\u003eErgonomic grip\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e The BK-200 is a hand belt knife with included blade for cutting conveyor belts in field repair situations. Heavier and more durable than utility knives, with a blade profile designed for clean belt cuts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen and how to use:\u003c\/strong\u003e Use as a backup or alternative to mechanical belt cutters when working in tight spaces. The dedicated belt-knife blade profile cuts cleaner than general utility knives and stays sharp through more cuts before needing replacement.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46696604565693,"sku":"BK-200","price":58.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_ea7cdd93-bcc2-440a-b1db-1ad36c5f3f54.jpg?v=1778103908"},{"product_id":"belt-fastener-tool-bt-1","title":"Belt Identification Tool BT-1","description":"\u003cp\u003e\u003cstrong\u003eBelt Identification Tool BT-1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 belt identification gauge\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eFor identifying belt thickness and matching the correct fastener size\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e The BT-1 is a belt identification tool used for measuring belt thickness, identifying fabric ply count, and determining the correct mechanical fastener size for an unknown belt.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen and how to use:\u003c\/strong\u003e Use during initial assessment of an unfamiliar belt: measure thickness with the precision gauge, count fabric plies if visible, then cross-reference the result with the rivet size chart (page 20 of the MATO catalog) to select the right fastener.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46696604598461,"sku":"BT-1","price":44.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_214e62b3-0659-4331-9123-e530b2ad0e3c.jpg?v=1778103907"},{"product_id":"belt-fastener-tool-skcu-48-skcu-48","title":"Belt Skiver and Cutter SKCU-48 - 48\" (1200mm) Hand-Operated for Belt Splice Preparation","description":"\u003cp\u003e\u003cstrong\u003eBelt Skiver and Cutter SKCU-48\u003c\/strong\u003e is a hand-operated belt-end preparation tool for 48-inch (1200 mm) belt widths. Used to make square, clean cuts and uniform-thickness skiving cuts before installing mechanical fasteners or preparing a belt for vulcanizing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 manual belt skiver\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eReplaceable cutting blade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Two functions in one tool. First, it cuts the belt square across its full width, ensuring the splice ends meet flush. Second, it skives (thins down) one or both belt ends to a uniform thickness, which is required for the splice to seat properly with mechanical fasteners or hot vulcanizing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to use:\u003c\/strong\u003e Position the belt under the cutter with proper alignment. Set the depth (for skiving) or full-cut blade (for cutting). Push the cutter handle along the 48-inch rail in a single smooth motion. The guide rail keeps the cut straight and the depth uniform across the entire belt width.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to use:\u003c\/strong\u003e Required for any field belt splicing job. Typical applications include conveyor belt repair at quarries, mines, plants, and construction sites where vulcanizing equipment is unavailable or impractical. Also used in shop environments before sending repaired belts back to the field.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing note:\u003c\/strong\u003e Choose the SKCU length to match your widest belt. The 48-inch SKCU handles belts up to 48\" wide. For belts wider than 48\", select a longer SKCU. For motorized cutting on the same belt sizes, see the APC-1.5 air-powered or BPC-1.0 battery-powered belt cutters.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46696604696765,"sku":"SKCU-48","price":5306.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_1d1b13b3-9d7b-46f4-a7bf-a7123c944c9d.jpg?v=1778103907"},{"product_id":"belt-fastener-tool-skcu-fk1-diamond-file-kit-skcu-fk1","title":"Belt Skiver\/Cutter Accessory SKCU-FK1 - Diamond File Kit","description":"\u003cp\u003e\u003cstrong\u003eBelt Skiver\/Cutter Accessory SKCU-FK1 - Diamond File Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 electric belt skiver tool\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eReplaceable cutting blades\u003c\/li\u003e\n\u003cli\u003ePower cord and accessories\u003c\/li\u003e\n\u003cli\u003eCarrying case\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it is:\u003c\/strong\u003e Diamond file kit for sharpening SKCU cutter and skiver blades. Maintains blade edge between full replacements, extending blade life and improving cut quality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to order:\u003c\/strong\u003e Order replacement parts during routine maintenance or when the SKCU performance degrades. Cutter blades, skiver blades, files, and ratchets all wear with use; periodic replacement keeps cuts clean and uniform.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible tools:\u003c\/strong\u003e All SKCU-series hand belt skivers and cutters (SKCU-36, SKCU-48, SKCU-54, SKCU-60, SKCU-72, SKCU-84). The accessory parts are common across all SKCU sizes.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46696604729533,"sku":"SKCU-FK1","price":84.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_e9cb8aea-7df2-4e84-8565-afd348d6040f.jpg?v=1778103908"},{"product_id":"belt-fastener-tool-est-kit-with-blades-gauge-case","title":"EasyFix Staplegrip Tool Kit EST-KIT - with Blades, Gauge, and Carrying Case","description":"\u003cp\u003e\u003cstrong\u003eEasyFix Staplegrip Tool Kit EST-KIT - with Blades, Gauge, and Carrying Case\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 EasyFix Staplegrip Tool Kit EST-KIT\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOperating instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Complete EasyFix Staplegrip installation kit. Includes the EasyFix hammer driver tool, replacement blades, belt thickness gauge, and a hard carrying case for portability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen and how to use:\u003c\/strong\u003e The EasyFix tool drives Staplegrip and EasyClip preset staples in two to three blows per staple - much faster than driving individual staples by hand. The kit's carrying case keeps all components organized for transport between job sites.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46696604795069,"sku":"EST-KIT","price":1499.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-cutter-replacement-blades_6d30fbfb-6821-4d79-8803-b213b0061c15.jpg?v=1778103907"},{"product_id":"belt-fastener-tool-skcu-72-skcu-72","title":"Belt Skiver and Cutter SKCU-72 - 72\" (1800mm) Hand-Operated for Belt Splice Preparation","description":"\u003cp\u003e\u003cstrong\u003eBelt Skiver and Cutter SKCU-72\u003c\/strong\u003e is a hand-operated belt-end preparation tool for 72-inch (1800 mm) belt widths. Used to make square, clean cuts and uniform-thickness skiving cuts before installing mechanical fasteners or preparing a belt for vulcanizing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 manual belt skiver\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eReplaceable cutting blade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Two functions in one tool. First, it cuts the belt square across its full width, ensuring the splice ends meet flush. Second, it skives (thins down) one or both belt ends to a uniform thickness, which is required for the splice to seat properly with mechanical fasteners or hot vulcanizing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to use:\u003c\/strong\u003e Position the belt under the cutter with proper alignment. Set the depth (for skiving) or full-cut blade (for cutting). Push the cutter handle along the 72-inch rail in a single smooth motion. The guide rail keeps the cut straight and the depth uniform across the entire belt width.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to use:\u003c\/strong\u003e Required for any field belt splicing job. Typical applications include conveyor belt repair at quarries, mines, plants, and construction sites where vulcanizing equipment is unavailable or impractical. Also used in shop environments before sending repaired belts back to the field.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing note:\u003c\/strong\u003e Choose the SKCU length to match your widest belt. The 72-inch SKCU handles belts up to 72\" wide. For belts wider than 72\", select a longer SKCU. For motorized cutting on the same belt sizes, see the APC-1.5 air-powered or BPC-1.0 battery-powered belt cutters.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46696604762301,"sku":"SKCU-72","price":6485.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_b6fc399e-d4af-4422-8c9f-d8b68372e3f0.jpg?v=1778103908"},{"product_id":"riv-nail-tool-apo-8-oil-heavy-duty-8-oz-apo-8","title":"Riv-Nail Air-Powered Accessory APO-8 - Air-Powered Heavy-Duty Oil 8 oz","description":"\u003cp\u003e\u003cstrong\u003eRiv-Nail Air-Powered Air-Powered Heavy-Duty Oil 8 oz\u003c\/strong\u003e (APO-8) is a component or accessory for the MATO RNAPD air-powered Riv-Nail driver system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 bottle of air-powered tool oil\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eFor inline oilers on RNAPD and similar pneumatic tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it is:\u003c\/strong\u003e 8-ounce bottle of heavy-duty oil for the APO in-line oiler. Refills the oiler reservoir for continuous lubrication during high-duty-cycle production splicing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen you need this:\u003c\/strong\u003e Replacement parts and accessories help maintain the RNAPD air-powered system through extended use. Air-powered Riv-Nail drivers are the fastest installation method available, capable of \"drive and set\" operation on up to 5 rivets at a time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible tools:\u003c\/strong\u003e All RNAPD air-powered driver kits and the AP series of accessories. The complete RNAPD-Kit includes one air-powered driver, two RNAPD-5 rivet drivers, in-line oiler, hose, regulator, oil, oiler wrench, coil puller, and storage box.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46696604827837,"sku":"APO-8","price":30.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_6ffabaa5-c819-49ec-951b-84b1615eb52f.jpg?v=1778103907"},{"product_id":"riv-nail-tool-rnat-36-mda2-7-16-gauge-rod-rnat-36-mda2","title":"Riv-Nail Manual Multi-Tool RNAT-36 - 7\/16\" Gauge Rod for 36\" Belt Width","description":"\u003cp\u003e\u003cstrong\u003eRiv-Nail Manual Multi-Tool RNAT-36-MDA2\u003c\/strong\u003e is the manual (non-powered) Riv-Nail application tool sized for 36-inch belt widths with a 7\/16\" (11.1 mm) heavy-duty gauge rod. Compatible with the R-5 1\/2, R-6, TR-6, and R-8 fastener series.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRNAT manual application tool body\u003c\/strong\u003e sized for 36\" belt width\u003c\/li\u003e\n\u003cli\u003eRivet guide block (built into tool body)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7\/16\" gauge rod\u003c\/strong\u003e (controls splice alignment during installation)\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHammer is NOT included.\u003c\/strong\u003e A 32 oz dead-blow hammer (or similar 1-3 lb well-balanced hammer) is required to drive the rivets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e The RNAT is the patented manual single-rivet driver for installing Riv-Nail rivet hinged belt fasteners. Only a 32 oz dead-blow hammer (or similar 1-3 lb well-balanced hammer, sold separately) and the application tool are needed. An average of three blows fully sets each rivet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included:\u003c\/strong\u003e The RNAT body sized to a 36-inch belt width, one rivet guide block, and the 7\/16\" gauge rod that controls the splice during installation. Hammer is not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBelt-width sizing:\u003c\/strong\u003e The RNAT body must match or exceed the belt width for proper rivet placement. This 36-inch unit covers belt widths up to 36 inches in a single setup. For wider belts, splice in two passes or use a wider RNAT.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to choose RNAT vs MRNAT:\u003c\/strong\u003e The RNAT is a single-rivet driver (one rivet per blow) and is the most economical Riv-Nail tool. It is fine for occasional splices and small shops. For high-volume installation or production environments, the MRNAT multi-driver kit drives 5 rivets per blow.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46696604860605,"sku":"RNAT-36-MDA2","price":1283.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-rnat-application-tool_b6825473-3545-4393-9bd8-b706699ea514.jpg?v=1778103907"},{"product_id":"belt-fastener-tool-estb-w3-1-4-6mm-wide-20-pack","title":"EasyFix Staplegrip Belt Tape ESTB-W3 - 1\/4\" (6 mm) Wide, 20-Pack","description":"\u003cp\u003e\u003cstrong\u003eEasyFix Staplegrip Belt Tape ESTB-W3\u003c\/strong\u003e is a 1\/4\" (6 mm) wide belt tape for use with the EasyFix Staplegrip installation system. Sold in 20-pack quantity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 roll of EasyFix Staplegrip Belt Tape\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e100-foot length\u003c\/li\u003e\n\u003cli\u003ePre-cut for the indicated staplegrip width\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e The belt tape provides initial adhesive holding during EasyFix Staplegrip installation, keeping the lacing strip aligned to the belt while staples are driven. After the staples are set, the tape becomes part of the splice assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to use:\u003c\/strong\u003e Required for EasyFix Staplegrip installation. The tape eliminates the need for a separate alignment jig and speeds installation by holding the splice in position hands-free during staple driving.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWidth selection:\u003c\/strong\u003e Match the tape width to the belt fastener size. Wider tape provides more adhesive contact area but adds slightly to the splice profile. The 1\/4\" width is correct for the size 62 EasyFix Staplegrip system.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46696604893373,"sku":"ESTB-W3","price":55.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_dd3028d0-4315-4439-9ff8-1c6a38635b16.jpg?v=1778103907"},{"product_id":"belt-fastener-tool-skcu-84-skcu-84","title":"Belt Skiver and Cutter SKCU-84 - 84\" (2130mm) Hand-Operated for Belt Splice Preparation","description":"\u003cp\u003e\u003cstrong\u003eBelt Skiver and Cutter SKCU-84\u003c\/strong\u003e is a hand-operated belt-end preparation tool for 84-inch (2130 mm) belt widths. Used to make square, clean cuts and uniform-thickness skiving cuts before installing mechanical fasteners or preparing a belt for vulcanizing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 manual belt skiver\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eReplaceable cutting blade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Two functions in one tool. First, it cuts the belt square across its full width, ensuring the splice ends meet flush. Second, it skives (thins down) one or both belt ends to a uniform thickness, which is required for the splice to seat properly with mechanical fasteners or hot vulcanizing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to use:\u003c\/strong\u003e Position the belt under the cutter with proper alignment. Set the depth (for skiving) or full-cut blade (for cutting). Push the cutter handle along the 84-inch rail in a single smooth motion. The guide rail keeps the cut straight and the depth uniform across the entire belt width.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to use:\u003c\/strong\u003e Required for any field belt splicing job. Typical applications include conveyor belt repair at quarries, mines, plants, and construction sites where vulcanizing equipment is unavailable or impractical. Also used in shop environments before sending repaired belts back to the field.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing note:\u003c\/strong\u003e Choose the SKCU length to match your widest belt. The 84-inch SKCU handles belts up to 84\" wide. For belts wider than 84\", select a longer SKCU. For motorized cutting on the same belt sizes, see the APC-1.5 air-powered or BPC-1.0 battery-powered belt cutters.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46696604926141,"sku":"SKCU-84","price":7075.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_65f34f71-0b15-4ce3-94d7-1e6bb7427c35.jpg?v=1778103907"},{"product_id":"riv-nail-tool-rnql-500dw-5-rivet-guide-block-double","title":"Riv-Nail Rivet Guide Block RNQL 500DW - 5-Rivet Double-Wide Capacity","description":"\u003cp\u003e\u003cstrong\u003eRiv-Nail Rivet Guide Block RNQL 500DW\u003c\/strong\u003e is a high-density polyethylene (UHMW) rivet positioning guide for simultaneous double-wide Riv-Nail installation. Holds two rows of 5 rivets each (10 rivets total) for one-strike installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 Riv-Nail Rivet Guide Block RNQL 500DW\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOperating instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e The guide block locates rivet holes precisely across the splice. Pre-set position eliminates the eyeballing and re-measuring that slows manual installation. Pair with the RNMDP-5 multi-rivet driver to drive all 5 (or 10) rivets in a single hammer blow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUHMW construction:\u003c\/strong\u003e Lightweight aluminum and ultra-high molecular weight polyethylene. The polyethylene face does not damage Riv-Nail rivet finish during driving. Patented anvil plates set the rivets cleanly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible tools:\u003c\/strong\u003e Use with MRNAT multi-driver tool kits, RNAPD air-powered driver, RNBH battery hammer, or RNEH corded hammer for fast production splicing.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46696604958909,"sku":"RNQL 500DW","price":391.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_572099a3-e2ad-4031-aac9-56fc7b4af4ca.jpg?v=1778103907"},{"product_id":"belt-fastener-tool-pen","title":"Belt Marking Pen PEN - Silver Marking for Belt Splice Layout","description":"\u003cp\u003e\u003cstrong\u003eBelt Marking Pen PEN - Silver Marking for Belt Splice Layout\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 belt marking pen\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eIndustrial marker for belt-end layout work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e The PEN is a silver-tipped marking pen for laying out splice positions on conveyor belts before cutting and rivet installation. The silver ink shows clearly on black rubber, dark fabric, and PVC belt covers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen and how to use:\u003c\/strong\u003e Use to mark cut lines, rivet positions, and splice alignment marks during pre-splice preparation. Standard tool in Riv-Nail and Plategrip splice kits. Marks remain visible during installation and wash off easily after splicing.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46696604991677,"sku":"PEN","price":28.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-belt-marking-pen_d450dcdf-f26a-4fa2-b807-19a32cd2830f.jpg?v=1778103847"},{"product_id":"belt-fastener-tool-bk-300","title":"Belt Knife Leather Sheath BK-300","description":"\u003cp\u003e\u003cstrong\u003eBelt Knife Leather Sheath BK-300\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 belt cutter tool\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eHardened steel blade\u003c\/li\u003e\n\u003cli\u003eErgonomic grip\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e The BK-300 is a leather sheath for the BK-200 belt knife. Protects the blade during transport and storage, and provides a safe way to carry the knife on a belt or in a tool kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen and how to use:\u003c\/strong\u003e Leather construction. Belt loop fitting allows wearing on a maintenance belt for easy access during fieldwork.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46696605024445,"sku":"BK-300","price":40.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_9e12a389-83a3-495d-a011-18b139b97c01.jpg?v=1778103847"}],"url":"https:\/\/texasbelting.com\/collections\/belt-fastener-tools.oembed?page=14","provider":"Texas Belting and Supply","version":"1.0","type":"link"}