{"title":"Bushings","description":"\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eBushings are tapered, split sleeves that clamp sheaves, sprockets, and pulleys onto a shaft without machining the component to a specific bore. One sheave casting serves dozens of shaft sizes; the bushing supplies the fit. This collection stocks 2,137 bushings across the three industry standard systems: Taper-Lock® (series 1008 through 7060), QD® (series JA through W), and double split taper (series G through U2).\u003c\/p\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eBores run 1\/4 in to over 7 in plus metric sizes to 120 mm, in machined steel with black oxide finish, stainless steel for wash down service, and ductile iron grade 65-45-12 on large series. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its entire load through a friction fit. Product pages carry published cross references to Dodge®, Martin, Browning®, TB Woods®, Tsubaki, and a dozen other brands.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eWhich Bushing System Do I Have?\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eTaper-Lock bushings are flangeless and sit flush inside the component, with set screws driven parallel to the shaft. QD bushings have a visible flange with cap screws through it. Split taper bushings have a flange plus a keyed barrel split through both taper and barrel. The component determines the system: match the series stamped on the old bushing or machined into the component seat.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eAre bushing sizes interchangeable between brands?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Taper-Lock, QD, and split taper series dimensions are industry standards, so a 1610 bushing from any manufacturer fits any component machined for a 1610 seat. Each product page lists the matching Dodge, Martin, Browning, TB Woods, and Tsubaki numbers from published interchange data.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat is the difference between Taper-Lock and QD bushings?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eMounting style. Taper-Lock bushings are flangeless and mount flush inside the component using axial set screws, giving a clean narrow assembly. QD (quick detachable) bushings use a bolted flange that makes installation and removal faster on large or frequently serviced drives. The systems are not interchangeable with each other; the component seat determines which you need.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow do I find my bushing size?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eRead the series number stamped on the existing bushing flange or barrel (for example 1610, SK, or P1), then measure the shaft bore. Series plus bore fully specifies the part: a 1610 x 1 is a 1610 series bushing with a 1 in bore.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhy does machined versus sintered steel matter in a bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eA bushing transmits its whole load through the friction grip of the taper. Machined solid steel has uniform density and grain, while sintered (powdered) metal parts can be more brittle under the wedging stress of the taper. Every bushing in this collection is machined from solid stock.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Are bushing sizes interchangeable between brands?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Taper-Lock, QD, and split taper series dimensions are industry standards, so a 1610 bushing from any manufacturer fits any component machined for a 1610 seat. Each product page lists the matching Dodge, Martin, Browning, TB Woods, and Tsubaki numbers from published interchange data.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is the difference between Taper-Lock and QD bushings?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Mounting style. Taper-Lock bushings are flangeless and mount flush inside the component using axial set screws, giving a clean narrow assembly. QD (quick detachable) bushings use a bolted flange that makes installation and removal faster on large or frequently serviced drives. The systems are not interchangeable with each other; the component seat determines which you need.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do I find my bushing size?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Read the series number stamped on the existing bushing flange or barrel (for example 1610, SK, or P1), then measure the shaft bore. Series plus bore fully specifies the part: a 1610 x 1 is a 1610 series bushing with a 1 in bore.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Why does machined versus sintered steel matter in a bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"A bushing transmits its whole load through the friction grip of the taper. Machined solid steel has uniform density and grain, while sintered (powdered) metal parts can be more brittle under the wedging stress of the taper. Every bushing in this collection is machined from solid stock.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed help selecting or pricing a part?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items. Volume and OEM pricing available.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e","products":[{"product_id":"bb-1008x1","title":"1008x1 Taper-Lock® Style Bushing, 1 in Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1008x1 Taper-Lock® Style Bushing, 1 in Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1008x1 is a 1008 series Taper-Lock style bushing with a 1 in bore, machined from solid steel with a black oxide finish. It mounts any 1008-bushed component, including sheaves, sprockets, and timing pulleys, to a 1 in shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008x1\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTorque Capacity\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1200 in-lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.152 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBolt Circle\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1.328125\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1008-bushed V-belt sheaves, sprockets, and timing pulleys to 1 in shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1008x1 interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008 X 1\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMartin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008 1\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008 1.\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTB Woods®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTL10081\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eUS Tsubaki\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008-1\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eRegal Rexnord (Browning®)\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008X1\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMasterdrive\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008-1\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eOptibelt\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008-1\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eJason Industrial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008-1\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMcMaster-Carr\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e57095K115\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1008x1 bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1008 series Taper-Lock style bushing, and mounts that component to a 1 in shaft. The 1008 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1008x1 replace the Dodge 1008 X 1 bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1008 series dimensions are an industry standard, and published interchange data crosses the 1008x1 directly to the Dodge 1008 X 1, as well as Martin 1008 1, Gates 1008 1., TB Woods TL10081. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1008x1 ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1008x1?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1008x1 bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1008 series Taper-Lock style bushing, and mounts that component to a 1 in shaft. The 1008 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1008x1 replace the Dodge 1008 X 1 bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1008 series dimensions are an industry standard, and published interchange data crosses the 1008x1 directly to the Dodge 1008 X 1, as well as Martin 1008 1, Gates 1008 1., TB Woods TL10081. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1008x1 ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927196750013,"sku":"BB-1008x1","price":12.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1008X20MM_4b8b232f-ba3b-496c-bb2d-3669846ab909.jpg?v=1781208110"},{"product_id":"bb-1008x1-2ss","title":"1008X1\/2SS Taper-Lock® Style Bushing, 1\/2 Finished in Bore, Stainless steel","description":"\u003cp style=\"color: #5a6478 !important; font-size: 14px !important; line-height: 1.5 !important; font-style: italic !important; margin: 0 0 16px 0 !important; padding: 10px 14px !important; background: #f5f6f8 !important; border-left: 3px solid #1e2d4d !important;\"\u003eRepresentative image shown. Actual product appearance varies by size, bore, and configuration. Refer to the specifications table for exact dimensions of this part number.\u003c\/p\u003e\n\n\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1008X1\/2SS Taper-Lock® Style Bushing, 1\/2 Finished in Bore, Stainless steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1008X1\/2SS is a 1008 series Taper-Lock style bushing with a 1\/2 Finished in bore, machined from solid stainless steel. It mounts any 1008-bushed component, including sheaves, sprockets, and timing pulleys, to a 1\/2 Finished in shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008X1\/2SS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1\/2 Finished in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eStainless steel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1.271 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1008-bushed V-belt sheaves, sprockets, and timing pulleys to 1\/2 Finished in shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eWash-down, food processing, and corrosive environments\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1008 Taper-Lock style designation is an industry standard. The 1008X1\/2SS fits any component machined for the same series, with a 1\/2 Finished in bore.\u003c\/p\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1008X1\/2SS bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1008 series Taper-Lock style bushing, and mounts that component to a 1\/2 Finished in shaft. The 1008 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhy choose a stainless steel bushing like the 1008X1\/2SS?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eStainless resists corrosion in wash-down, food processing, chemical, and outdoor service where standard black oxide steel bushings rust. Dimensions match the standard series, so stainless swaps in without changing the component.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1008X1\/2SS ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1008X1\/2SS?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1008X1\/2SS bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1008 series Taper-Lock style bushing, and mounts that component to a 1\/2 Finished in shaft. The 1008 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Why choose a stainless steel bushing like the 1008X1\/2SS?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Stainless resists corrosion in wash-down, food processing, chemical, and outdoor service where standard black oxide steel bushings rust. Dimensions match the standard series, so stainless swaps in without changing the component.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1008X1\/2SS ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927196815549,"sku":"BB-1008X1\/2SS","price":136.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/bb-generic-bushings_c1ab8b75-5eb8-434e-904a-04d534d3cb20.jpg?v=1781208111"},{"product_id":"bb-1008x11-16","title":"1008x11\/16 Taper-Lock® Style Bushing, 11\/16 in Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1008x11\/16 Taper-Lock® Style Bushing, 11\/16 in Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1008x11\/16 is a 1008 series Taper-Lock style bushing with a 11\/16 in bore, machined from solid steel with a black oxide finish. It mounts any 1008-bushed component, including sheaves, sprockets, and timing pulleys, to a 11\/16 in shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008x11\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e11\/16 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTorque Capacity\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1200 in-lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.251 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBolt Circle\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1.328125\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1008-bushed V-belt sheaves, sprockets, and timing pulleys to 11\/16 in shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1008x11\/16 interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008 X 11\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMartin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008.6875\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008.11\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTB Woods®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTL10081116\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eUS Tsubaki\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008K\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eRegal Rexnord (Browning®)\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008X11\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMasterdrive\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008-11\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eOptibelt\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008-11\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eJason Industrial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008-11\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGrainger\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e812ZD6\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1008x11\/16 bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1008 series Taper-Lock style bushing, and mounts that component to a 11\/16 in shaft. The 1008 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1008x11\/16 replace the Dodge 1008 X 11\/16 bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1008 series dimensions are an industry standard, and published interchange data crosses the 1008x11\/16 directly to the Dodge 1008 X 11\/16, as well as Martin 1008.6875, Gates 1008.11\/16, TB Woods TL10081116. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1008x11\/16 ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1008x11\/16?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1008x11\/16 bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1008 series Taper-Lock style bushing, and mounts that component to a 11\/16 in shaft. The 1008 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1008x11\/16 replace the Dodge 1008 X 11\/16 bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1008 series dimensions are an industry standard, and published interchange data crosses the 1008x11\/16 directly to the Dodge 1008 X 11\/16, as well as Martin 1008.6875, Gates 1008.11\/16, TB Woods TL10081116. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1008x11\/16 ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927197077693,"sku":"BB-1008x11\/16","price":12.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1008X20MM_edb09de4-5050-4800-8b70-5188b0aaf5ee.jpg?v=1781208110"},{"product_id":"bb-1008x1-2","title":"1008x1\/2 Taper-Lock® Style Bushing, 1\/2 in Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1008x1\/2 Taper-Lock® Style Bushing, 1\/2 in Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1008x1\/2 is a 1008 series Taper-Lock style bushing with a 1\/2 in bore, machined from solid steel with a black oxide finish. It mounts any 1008-bushed component, including sheaves, sprockets, and timing pulleys, to a 1\/2 in shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008x1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1\/2 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTorque Capacity\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1200 in-lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.271 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBolt Circle\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1.328125\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1008-bushed V-belt sheaves, sprockets, and timing pulleys to 1\/2 in shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1008x1\/2 interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008 X 1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMartin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008.5\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008.1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTB Woods®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTL100812\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eUS Tsubaki\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008H\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eRegal Rexnord (Browning®)\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008X1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMasterdrive\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008-1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eOptibelt\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008-1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eJason Industrial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008-1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMcMaster-Carr\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e27095K111\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1008x1\/2 bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1008 series Taper-Lock style bushing, and mounts that component to a 1\/2 in shaft. The 1008 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1008x1\/2 replace the Dodge 1008 X 1\/2 bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1008 series dimensions are an industry standard, and published interchange data crosses the 1008x1\/2 directly to the Dodge 1008 X 1\/2, as well as Martin 1008.5, Gates 1008.1\/2, TB Woods TL100812. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1008x1\/2 ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1008x1\/2?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1008x1\/2 bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1008 series Taper-Lock style bushing, and mounts that component to a 1\/2 in shaft. The 1008 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1008x1\/2 replace the Dodge 1008 X 1\/2 bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1008 series dimensions are an industry standard, and published interchange data crosses the 1008x1\/2 directly to the Dodge 1008 X 1\/2, as well as Martin 1008.5, Gates 1008.1\/2, TB Woods TL100812. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1008x1\/2 ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927197438141,"sku":"BB-1008x1\/2","price":12.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1008X20MM_a3055739-1794-4e9e-b7ed-2e6c48b2e239.jpg?v=1781208111"},{"product_id":"bb-1215x7-8","title":"1215x7\/8 Taper-Lock® Style Bushing, 7\/8 in Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1215x7\/8 Taper-Lock® Style Bushing, 7\/8 in Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1215x7\/8 is a 1215 series Taper-Lock style bushing with a 7\/8 in bore, machined from solid steel with a black oxide finish. It mounts any 1215-bushed component, including sheaves, sprockets, and timing pulleys, to a 7\/8 in shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215x7\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e7\/8 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTorque Capacity\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e3550 in-lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.71 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBolt Circle\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1.75\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1215-bushed V-belt sheaves, sprockets, and timing pulleys to 7\/8 in shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1215x7\/8 interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215 X 7\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMartin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215.875\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215.7\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTB Woods®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTL121578\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eUS Tsubaki\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215P\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eRegal Rexnord (Browning®)\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215X7\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMasterdrive\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215-7\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eOptibelt\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215-7\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eJason Industrial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215-7\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMcMaster-Carr\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e57095K144\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1215x7\/8 bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1215 series Taper-Lock style bushing, and mounts that component to a 7\/8 in shaft. The 1215 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1215x7\/8 replace the Dodge 1215 X 7\/8 bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1215 series dimensions are an industry standard, and published interchange data crosses the 1215x7\/8 directly to the Dodge 1215 X 7\/8, as well as Martin 1215.875, Gates 1215.7\/8, TB Woods TL121578. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1215x7\/8 ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1215x7\/8?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1215x7\/8 bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1215 series Taper-Lock style bushing, and mounts that component to a 7\/8 in shaft. The 1215 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1215x7\/8 replace the Dodge 1215 X 7\/8 bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1215 series dimensions are an industry standard, and published interchange data crosses the 1215x7\/8 directly to the Dodge 1215 X 7\/8, as well as Martin 1215.875, Gates 1215.7\/8, TB Woods TL121578. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1215x7\/8 ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927270084797,"sku":"BB-1215x7\/8","price":16.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1215X20MM_fc70a7e5-d411-430b-96f6-a5bbaf11a9d6.jpg?v=1781209231"},{"product_id":"bb-1210x16mm","title":"1210x16mm Taper-Lock® Style Bushing, 16mm Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1210x16mm Taper-Lock® Style Bushing, 16mm Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x16mm is a 1210 series Taper-Lock style bushing with a 16mm bore, machined from solid steel with a black oxide finish. It mounts any 1210-bushed component, including sheaves, sprockets, and timing pulleys, to a 16mm shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210x16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTorque Capacity\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e3600 in-lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.6 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBolt Circle\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1.75\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1210-bushed V-belt sheaves, sprockets, and timing pulleys to 16mm shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x16mm interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210 X 16MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMartin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210 16MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210 16MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTB Woods®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTL121016MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMasterdrive\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210-16MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eOptibelt\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210-16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMcMaster-Carr\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e57095K448\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGrainger\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e812ZJ3\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaska\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210X16MM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1210x16mm bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 16mm shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x16mm replace the Dodge 1210 X 16MM bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1210 series dimensions are an industry standard, and published interchange data crosses the 1210x16mm directly to the Dodge 1210 X 16MM, as well as Martin 1210 16MM, Gates 1210 16MM, TB Woods TL121016MM. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x16mm ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1210x16mm?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1210x16mm bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 16mm shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x16mm replace the Dodge 1210 X 16MM bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1210 series dimensions are an industry standard, and published interchange data crosses the 1210x16mm directly to the Dodge 1210 X 16MM, as well as Martin 1210 16MM, Gates 1210 16MM, TB Woods TL121016MM. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x16mm ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927270379709,"sku":"BB-1210x16mm","price":14.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1210X20MM_24af1748-9fad-4113-9874-cf3f1663ac84.jpg?v=1781209232"},{"product_id":"bb-1210x15mm","title":"1210x15mm Taper-Lock® Style Bushing, 15mm Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1210x15mm Taper-Lock® Style Bushing, 15mm Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x15mm is a 1210 series Taper-Lock style bushing with a 15mm bore, machined from solid steel with a black oxide finish. It mounts any 1210-bushed component, including sheaves, sprockets, and timing pulleys, to a 15mm shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210x15mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e15mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTorque Capacity\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e3600 in-lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.586 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBolt Circle\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1.75\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1210-bushed V-belt sheaves, sprockets, and timing pulleys to 15mm shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x15mm interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210 X 15MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMartin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210 15MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210 15MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTB Woods®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTL121015MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eOptibelt\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210-15\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaska\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210X15MM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1210x15mm bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 15mm shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x15mm replace the Dodge 1210 X 15MM bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1210 series dimensions are an industry standard, and published interchange data crosses the 1210x15mm directly to the Dodge 1210 X 15MM, as well as Martin 1210 15MM, Gates 1210 15MM, TB Woods TL121015MM. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x15mm ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1210x15mm?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1210x15mm bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 15mm shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x15mm replace the Dodge 1210 X 15MM bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1210 series dimensions are an industry standard, and published interchange data crosses the 1210x15mm directly to the Dodge 1210 X 15MM, as well as Martin 1210 15MM, Gates 1210 15MM, TB Woods TL121015MM. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x15mm ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927270248637,"sku":"BB-1210x15mm","price":14.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1210X20MM_7a2a9d14-b76f-43bf-b598-dbf637a280c8.jpg?v=1781209230"},{"product_id":"bb-1215x1-2","title":"1215x1\/2 Taper-Lock® Style Bushing, 1\/2 in Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1215x1\/2 Taper-Lock® Style Bushing, 1\/2 in Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1215x1\/2 is a 1215 series Taper-Lock style bushing with a 1\/2 in bore, machined from solid steel with a black oxide finish. It mounts any 1215-bushed component, including sheaves, sprockets, and timing pulleys, to a 1\/2 in shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215x1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1\/2 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTorque Capacity\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e3550 in-lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.8 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBolt Circle\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1.75\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1215-bushed V-belt sheaves, sprockets, and timing pulleys to 1\/2 in shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1215x1\/2 interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215 X 1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMartin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215.5\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215.1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTB Woods®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTL121512\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eUS Tsubaki\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215H\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eRegal Rexnord (Browning®)\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215X1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMasterdrive\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215-1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eOptibelt\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215-1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGrainger\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e812ZK3\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaska\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215X1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1215x1\/2 bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1215 series Taper-Lock style bushing, and mounts that component to a 1\/2 in shaft. The 1215 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1215x1\/2 replace the Dodge 1215 X 1\/2 bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1215 series dimensions are an industry standard, and published interchange data crosses the 1215x1\/2 directly to the Dodge 1215 X 1\/2, as well as Martin 1215.5, Gates 1215.1\/2, TB Woods TL121512. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1215x1\/2 ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1215x1\/2?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1215x1\/2 bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1215 series Taper-Lock style bushing, and mounts that component to a 1\/2 in shaft. The 1215 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1215x1\/2 replace the Dodge 1215 X 1\/2 bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1215 series dimensions are an industry standard, and published interchange data crosses the 1215x1\/2 directly to the Dodge 1215 X 1\/2, as well as Martin 1215.5, Gates 1215.1\/2, TB Woods TL121512. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1215x1\/2 ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927270281405,"sku":"BB-1215x1\/2","price":16.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1215X20MM_60cad363-df60-499a-9a2c-df8e3b83dcf8.jpg?v=1781209230"},{"product_id":"bb-1215x13-16","title":"1215x13\/16 Taper-Lock® Style Bushing, 13\/16 in Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1215x13\/16 Taper-Lock® Style Bushing, 13\/16 in Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1215x13\/16 is a 1215 series Taper-Lock style bushing with a 13\/16 in bore, machined from solid steel with a black oxide finish. It mounts any 1215-bushed component, including sheaves, sprockets, and timing pulleys, to a 13\/16 in shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215x13\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e13\/16 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTorque Capacity\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e3550 in-lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.7 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBolt Circle\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1.75\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1215-bushed V-belt sheaves, sprockets, and timing pulleys to 13\/16 in shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1215x13\/16 interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215 X 13\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMartin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215.8125\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215.13\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTB Woods®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTL121513\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eUS Tsubaki\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215M\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eRegal Rexnord (Browning®)\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215X13\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMasterdrive\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215-13\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eOptibelt\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215-13\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eJason Industrial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215-13\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGrainger\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e812ZK8\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1215x13\/16 bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1215 series Taper-Lock style bushing, and mounts that component to a 13\/16 in shaft. The 1215 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1215x13\/16 replace the Dodge 1215 X 13\/16 bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1215 series dimensions are an industry standard, and published interchange data crosses the 1215x13\/16 directly to the Dodge 1215 X 13\/16, as well as Martin 1215.8125, Gates 1215.13\/16, TB Woods TL121513\/16. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1215x13\/16 ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1215x13\/16?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1215x13\/16 bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1215 series Taper-Lock style bushing, and mounts that component to a 13\/16 in shaft. The 1215 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1215x13\/16 replace the Dodge 1215 X 13\/16 bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1215 series dimensions are an industry standard, and published interchange data crosses the 1215x13\/16 directly to the Dodge 1215 X 13\/16, as well as Martin 1215.8125, Gates 1215.13\/16, TB Woods TL121513\/16. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1215x13\/16 ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927270346941,"sku":"BB-1215x13\/16","price":16.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1215X20MM_525c1a37-5358-4b3f-997a-3c83735bd2b5.jpg?v=1781209231"},{"product_id":"bb-1210x24mm","title":"1210x24mm Taper-Lock® Style Bushing, 24mm Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1210x24mm Taper-Lock® Style Bushing, 24mm Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x24mm is a 1210 series Taper-Lock style bushing with a 24mm bore, machined from solid steel with a black oxide finish. It mounts any 1210-bushed component, including sheaves, sprockets, and timing pulleys, to a 24mm shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210x24mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e24mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.445 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1210-bushed V-belt sheaves, sprockets, and timing pulleys to 24mm shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210 Taper-Lock style designation is an industry standard. The 1210x24mm fits any component machined for the same series, with a 24mm bore.\u003c\/p\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1210x24mm bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 24mm shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x24mm ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1210x24mm?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1210x24mm bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 24mm shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x24mm ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927270576317,"sku":"BB-1210x24mm","price":14.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1210X20MM_432ca468-1b1c-48e6-afe8-03bd94601da5.jpg?v=1781209230"},{"product_id":"bb-1210x25mm","title":"1210x25mm Taper-Lock® Style Bushing, 25mm Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1210x25mm Taper-Lock® Style Bushing, 25mm Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x25mm is a 1210 series Taper-Lock style bushing with a 25mm bore, machined from solid steel with a black oxide finish. It mounts any 1210-bushed component, including sheaves, sprockets, and timing pulleys, to a 25mm shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210x25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.5 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1210-bushed V-belt sheaves, sprockets, and timing pulleys to 25mm shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x25mm interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210 X 25MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMartin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210 25MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210 25MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTB Woods®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTL121025MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMasterdrive\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210-25MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eOptibelt\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210-25\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMcMaster-Carr\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e57095K455\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGrainger\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e812ZJ9\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaska\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210X25MM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1210x25mm bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 25mm shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x25mm replace the Dodge 1210 X 25MM bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1210 series dimensions are an industry standard, and published interchange data crosses the 1210x25mm directly to the Dodge 1210 X 25MM, as well as Martin 1210 25MM, Gates 1210 25MM, TB Woods TL121025MM. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x25mm ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1210x25mm?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1210x25mm bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 25mm shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x25mm replace the Dodge 1210 X 25MM bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1210 series dimensions are an industry standard, and published interchange data crosses the 1210x25mm directly to the Dodge 1210 X 25MM, as well as Martin 1210 25MM, Gates 1210 25MM, TB Woods TL121025MM. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x25mm ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927270543549,"sku":"BB-1210x25mm","price":14.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1210X20MM_a64375b1-0737-41f9-8592-71b6c758c6b8.jpg?v=1781209232"},{"product_id":"bb-1210x28mm","title":"1210x28mm Taper-Lock® Style Bushing, 28mm Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1210x28mm Taper-Lock® Style Bushing, 28mm Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x28mm is a 1210 series Taper-Lock style bushing with a 28mm bore, machined from solid steel with a black oxide finish. It mounts any 1210-bushed component, including sheaves, sprockets, and timing pulleys, to a 28mm shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210x28mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e28mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTorque Capacity\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e3600 in-lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.395 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBolt Circle\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1.75\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1210-bushed V-belt sheaves, sprockets, and timing pulleys to 28mm shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x28mm interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210 X 28MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMartin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210 28MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210 28MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTB Woods®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTL121028MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMasterdrive\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210-28MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eOptibelt\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210-28\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMcMaster-Carr\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e57095K456\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGrainger\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e812ZK0\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaska\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210X28MM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1210x28mm bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 28mm shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x28mm replace the Dodge 1210 X 28MM bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1210 series dimensions are an industry standard, and published interchange data crosses the 1210x28mm directly to the Dodge 1210 X 28MM, as well as Martin 1210 28MM, Gates 1210 28MM, TB Woods TL121028MM. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x28mm ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1210x28mm?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1210x28mm bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 28mm shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x28mm replace the Dodge 1210 X 28MM bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1210 series dimensions are an industry standard, and published interchange data crosses the 1210x28mm directly to the Dodge 1210 X 28MM, as well as Martin 1210 28MM, Gates 1210 28MM, TB Woods TL121028MM. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x28mm ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927270641853,"sku":"BB-1210x28mm","price":14.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1210X28MM_1606593b-f5d9-489b-b801-af1cc7b33bf5.jpg?v=1781209233"},{"product_id":"bb-1210x3-4","title":"1210x3\/4 Taper-Lock® Style Bushing, 3\/4 in Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1210x3\/4 Taper-Lock® Style Bushing, 3\/4 in Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x3\/4 is a 1210 series Taper-Lock style bushing with a 3\/4 in bore, machined from solid steel with a black oxide finish. It mounts any 1210-bushed component, including sheaves, sprockets, and timing pulleys, to a 3\/4 in shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210x3\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e3\/4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTorque Capacity\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e3600 in-lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.534 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBolt Circle\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1.75\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1210-bushed V-belt sheaves, sprockets, and timing pulleys to 3\/4 in shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x3\/4 interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210 X 3\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMartin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210.75\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210.3\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTB Woods®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTL121034\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eUS Tsubaki\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210L\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eRegal Rexnord (Browning®)\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210X3\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMasterdrive\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210-3\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eOptibelt\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210-3\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eJason Industrial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210-3\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMcMaster-Carr\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e57095K133\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1210x3\/4 bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 3\/4 in shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x3\/4 replace the Dodge 1210 X 3\/4 bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1210 series dimensions are an industry standard, and published interchange data crosses the 1210x3\/4 directly to the Dodge 1210 X 3\/4, as well as Martin 1210.75, Gates 1210.3\/4, TB Woods TL121034. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x3\/4 ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1210x3\/4?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1210x3\/4 bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 3\/4 in shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x3\/4 replace the Dodge 1210 X 3\/4 bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1210 series dimensions are an industry standard, and published interchange data crosses the 1210x3\/4 directly to the Dodge 1210 X 3\/4, as well as Martin 1210.75, Gates 1210.3\/4, TB Woods TL121034. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x3\/4 ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927270674621,"sku":"BB-1210x3\/4","price":14.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1210X20MM_5784e6d6-edc2-461f-be9f-9568c671dfd7.jpg?v=1781209230"},{"product_id":"bb-1310x1-3-16","title":"1310x1-3\/16 Taper-Lock® Style Bushing, 1-3\/16 in Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1310x1-3\/16 Taper-Lock® Style Bushing, 1-3\/16 in Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1310x1-3\/16 is a 1310 series Taper-Lock style bushing with a 1-3\/16 in bore, machined from solid steel with a black oxide finish. It mounts any 1310-bushed component, including sheaves, sprockets, and timing pulleys, to a 1-3\/16 in shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310x1-3\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1-3\/16 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTorque Capacity\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e3850 in-lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.7 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBolt Circle\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1.875\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1310-bushed V-belt sheaves, sprockets, and timing pulleys to 1-3\/16 in shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1310x1-3\/16 interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310 X 1-3\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMartin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310 1 3\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310 1.3\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTB Woods®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTL13101316\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eUS Tsubaki\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310-1C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMasterdrive\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310-1.3\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eOptibelt\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310-1 3\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eJason Industrial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310-1-3\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGoodyear\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310X1-3\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1310x1-3\/16 bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1310 series Taper-Lock style bushing, and mounts that component to a 1-3\/16 in shaft. The 1310 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1310x1-3\/16 replace the Dodge 1310 X 1-3\/16 bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1310 series dimensions are an industry standard, and published interchange data crosses the 1310x1-3\/16 directly to the Dodge 1310 X 1-3\/16, as well as Martin 1310 1 3\/16, Gates 1310 1.3\/16, TB Woods TL13101316. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1310x1-3\/16 ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1310x1-3\/16?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1310x1-3\/16 bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1310 series Taper-Lock style bushing, and mounts that component to a 1-3\/16 in shaft. The 1310 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1310x1-3\/16 replace the Dodge 1310 X 1-3\/16 bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1310 series dimensions are an industry standard, and published interchange data crosses the 1310x1-3\/16 directly to the Dodge 1310 X 1-3\/16, as well as Martin 1310 1 3\/16, Gates 1310 1.3\/16, TB Woods TL13101316. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1310x1-3\/16 ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927270707389,"sku":"BB-1310x1-3\/16","price":17.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/4040x3-1_2_f16d4f98-96e8-4852-8d5e-6a0ec3a99ecb.jpg?v=1781209229"},{"product_id":"bb-1210x3-4ss","title":"1210x3\/4SS Taper-Lock® Style Bushing, 3\/4 in Bore, Stainless steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1210x3\/4SS Taper-Lock® Style Bushing, 3\/4 in Bore, Stainless steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x3\/4SS is a 1210 series Taper-Lock style bushing with a 3\/4 in bore, machined from solid stainless steel. It mounts any 1210-bushed component, including sheaves, sprockets, and timing pulleys, to a 3\/4 in shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210x3\/4SS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e3\/4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eStainless steel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.6 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1210-bushed V-belt sheaves, sprockets, and timing pulleys to 3\/4 in shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eWash-down, food processing, and corrosive environments\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x3\/4SS interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210 X 3\/4SS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSS 1210 .3\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1210x3\/4SS bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 3\/4 in shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x3\/4SS replace the Dodge 1210 X 3\/4SS bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1210 series dimensions are an industry standard, and published interchange data crosses the 1210x3\/4SS directly to the Dodge 1210 X 3\/4SS, as well as Gates SS 1210 .3\/4. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhy choose a stainless steel bushing like the 1210x3\/4SS?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eStainless resists corrosion in wash-down, food processing, chemical, and outdoor service where standard black oxide steel bushings rust. Dimensions match the standard series, so stainless swaps in without changing the component.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x3\/4SS ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1210x3\/4SS?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1210x3\/4SS bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 3\/4 in shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x3\/4SS replace the Dodge 1210 X 3\/4SS bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1210 series dimensions are an industry standard, and published interchange data crosses the 1210x3\/4SS directly to the Dodge 1210 X 3\/4SS, as well as Gates SS 1210 .3\/4. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Why choose a stainless steel bushing like the 1210x3\/4SS?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Stainless resists corrosion in wash-down, food processing, chemical, and outdoor service where standard black oxide steel bushings rust. Dimensions match the standard series, so stainless swaps in without changing the component.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x3\/4SS ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927270838461,"sku":"BB-1210x3\/4SS","price":146.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1210X20MM_d30f90d1-4f5c-4557-bd68-7d512742d2ae.jpg?v=1781209230"},{"product_id":"bb-1210xmpb","title":"1210XMPB Taper-Lock® Style Bushing, Minimum Plain Bore, Steel","description":"\u003cp style=\"color: #5a6478 !important; font-size: 14px !important; line-height: 1.5 !important; font-style: italic !important; margin: 0 0 16px 0 !important; padding: 10px 14px !important; background: #f5f6f8 !important; border-left: 3px solid #1e2d4d !important;\"\u003eRepresentative image shown. Actual product appearance varies by size, bore, and configuration. Refer to the specifications table for exact dimensions of this part number.\u003c\/p\u003e\n\n\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1210XMPB Taper-Lock® Style Bushing, Minimum Plain Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210XMPB is a 1210 series Taper-Lock style bushing supplied with a minimum plain bore for finishing to your shaft size, machined from solid steel with a black oxide finish. It mounts any 1210-bushed component, including sheaves, sprockets, and timing pulleys. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210XMPB\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eMinimum plain bore (finish to size)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.506 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1210-bushed V-belt sheaves, sprockets, and timing pulleys\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210 Taper-Lock style designation is an industry standard. The 1210XMPB fits any component machined for the same series.\u003c\/p\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1210XMPB bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing. The 1210 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does minimum plain bore mean on the 1210XMPB?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt ships with a small pilot bore and is machined to your exact shaft size and keyway before installation. Call (888) 203-2358 if you need it finished to a specific bore before shipping.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210XMPB ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1210XMPB?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1210XMPB bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing. The 1210 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does minimum plain bore mean on the 1210XMPB?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It ships with a small pilot bore and is machined to your exact shaft size and keyway before installation. Call (888) 203-2358 if you need it finished to a specific bore before shipping.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210XMPB ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927270936765,"sku":"BB-1210XMPB","price":14.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/bb-generic-bushings_f3239fee-2e59-4d77-8447-ba040ebe65ab.jpg?v=1781209230"},{"product_id":"bb-1210x1ss","title":"1210x1SS Taper-Lock® Style Bushing, 1 in Bore, Stainless steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1210x1SS Taper-Lock® Style Bushing, 1 in Bore, Stainless steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x1SS is a 1210 series Taper-Lock style bushing with a 1 in bore, machined from solid stainless steel. It mounts any 1210-bushed component, including sheaves, sprockets, and timing pulleys, to a 1 in shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210x1SS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eStainless steel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.666 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1210-bushed V-belt sheaves, sprockets, and timing pulleys to 1 in shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eWash-down, food processing, and corrosive environments\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x1SS interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210 X 1SS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSS 1210 1\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1210x1SS bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 1 in shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x1SS replace the Dodge 1210 X 1SS bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1210 series dimensions are an industry standard, and published interchange data crosses the 1210x1SS directly to the Dodge 1210 X 1SS, as well as Gates SS 1210 1. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhy choose a stainless steel bushing like the 1210x1SS?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eStainless resists corrosion in wash-down, food processing, chemical, and outdoor service where standard black oxide steel bushings rust. Dimensions match the standard series, so stainless swaps in without changing the component.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x1SS ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1210x1SS?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1210x1SS bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 1 in shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x1SS replace the Dodge 1210 X 1SS bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1210 series dimensions are an industry standard, and published interchange data crosses the 1210x1SS directly to the Dodge 1210 X 1SS, as well as Gates SS 1210 1. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Why choose a stainless steel bushing like the 1210x1SS?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Stainless resists corrosion in wash-down, food processing, chemical, and outdoor service where standard black oxide steel bushings rust. Dimensions match the standard series, so stainless swaps in without changing the component.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x1SS ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927270969533,"sku":"BB-1210x1SS","price":146.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1210X20MM_331f45d1-26ec-4fba-aec4-46617c981060.jpg?v=1781209229"},{"product_id":"bb-1210x18mm","title":"1210x18mm Taper-Lock® Style Bushing, 18mm Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1210x18mm Taper-Lock® Style Bushing, 18mm Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x18mm is a 1210 series Taper-Lock style bushing with a 18mm bore, machined from solid steel with a black oxide finish. It mounts any 1210-bushed component, including sheaves, sprockets, and timing pulleys, to a 18mm shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210x18mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e18mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.445 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1210-bushed V-belt sheaves, sprockets, and timing pulleys to 18mm shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210 Taper-Lock style designation is an industry standard. The 1210x18mm fits any component machined for the same series, with a 18mm bore.\u003c\/p\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1210x18mm bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 18mm shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x18mm ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1210x18mm?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1210x18mm bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 18mm shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x18mm ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927271002301,"sku":"BB-1210x18mm","price":14.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1210X20MM_f6a25bc3-1880-4190-8883-82d353fb8943.jpg?v=1781209232"},{"product_id":"bb-1215x30mm","title":"1215x30mm Taper-Lock® Style Bushing, 30mm Bore, Steel","description":"\u003cp style=\"color: #5a6478 !important; font-size: 14px !important; line-height: 1.5 !important; font-style: italic !important; margin: 0 0 16px 0 !important; padding: 10px 14px !important; background: #f5f6f8 !important; border-left: 3px solid #1e2d4d !important;\"\u003eRepresentative image shown. Actual product appearance varies by size, bore, and configuration. Refer to the specifications table for exact dimensions of this part number.\u003c\/p\u003e\n\n\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1215x30mm Taper-Lock® Style Bushing, 30mm Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1215x30mm is a 1215 series Taper-Lock style bushing with a 30mm bore, machined from solid steel with a black oxide finish. It mounts any 1215-bushed component, including sheaves, sprockets, and timing pulleys, to a 30mm shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215x30mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e30mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.45 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1215-bushed V-belt sheaves, sprockets, and timing pulleys to 30mm shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1215 Taper-Lock style designation is an industry standard. The 1215x30mm fits any component machined for the same series, with a 30mm bore.\u003c\/p\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1215x30mm bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1215 series Taper-Lock style bushing, and mounts that component to a 30mm shaft. The 1215 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1215x30mm ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1215x30mm?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1215x30mm bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1215 series Taper-Lock style bushing, and mounts that component to a 30mm shaft. The 1215 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1215x30mm ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927271035069,"sku":"BB-1215x30mm","price":16.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/bb-generic-bushings_6ebde0c2-89bf-42ac-971a-e847372a3a36.jpg?v=1781209230"},{"product_id":"bb-1210x20mm","title":"1210x20mm Taper-Lock® Style Bushing, 20mm Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1210x20mm Taper-Lock® Style Bushing, 20mm Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x20mm is a 1210 series Taper-Lock style bushing with a 20mm bore, machined from solid steel with a black oxide finish. It mounts any 1210-bushed component, including sheaves, sprockets, and timing pulleys, to a 20mm shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210x20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTorque Capacity\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e3600 in-lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.525 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBolt Circle\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1.75\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1210-bushed V-belt sheaves, sprockets, and timing pulleys to 20mm shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x20mm interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210 X 20MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMartin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210 20MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210 20MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTB Woods®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTL121020MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMasterdrive\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210-20MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eOptibelt\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210-20\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMcMaster-Carr\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e57095K452\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGrainger\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e812ZJ6\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaska\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210X20MM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1210x20mm bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 20mm shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x20mm replace the Dodge 1210 X 20MM bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1210 series dimensions are an industry standard, and published interchange data crosses the 1210x20mm directly to the Dodge 1210 X 20MM, as well as Martin 1210 20MM, Gates 1210 20MM, TB Woods TL121020MM. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x20mm ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1210x20mm?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1210x20mm bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 20mm shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x20mm replace the Dodge 1210 X 20MM bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1210 series dimensions are an industry standard, and published interchange data crosses the 1210x20mm directly to the Dodge 1210 X 20MM, as well as Martin 1210 20MM, Gates 1210 20MM, TB Woods TL121020MM. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x20mm ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927271100605,"sku":"BB-1210x20mm","price":14.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1210X20MM_eae1bf8c-d447-48be-ab3a-c6be6f7d2ab9.jpg?v=1781209230"},{"product_id":"bb-1310x1-1-16","title":"1310x1-1\/16 Taper-Lock® Style Bushing, 1-1\/16 in Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1310x1-1\/16 Taper-Lock® Style Bushing, 1-1\/16 in Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1310x1-1\/16 is a 1310 series Taper-Lock style bushing with a 1-1\/16 in bore, machined from solid steel with a black oxide finish. It mounts any 1310-bushed component, including sheaves, sprockets, and timing pulleys, to a 1-1\/16 in shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310x1-1\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1-1\/16 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTorque Capacity\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e3850 in-lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.7 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBolt Circle\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1.875\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1310-bushed V-belt sheaves, sprockets, and timing pulleys to 1-1\/16 in shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1310x1-1\/16 interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310 X 1-1\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMartin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310 1 1\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310 1.1\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTB Woods®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTL13101116\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eUS Tsubaki\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310-1A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMasterdrive\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310-1.1\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eOptibelt\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310-1 1\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eJason Industrial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310-1-1\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGoodyear\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310X1-1\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1310x1-1\/16 bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1310 series Taper-Lock style bushing, and mounts that component to a 1-1\/16 in shaft. The 1310 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1310x1-1\/16 replace the Dodge 1310 X 1-1\/16 bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1310 series dimensions are an industry standard, and published interchange data crosses the 1310x1-1\/16 directly to the Dodge 1310 X 1-1\/16, as well as Martin 1310 1 1\/16, Gates 1310 1.1\/16, TB Woods TL13101116. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1310x1-1\/16 ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1310x1-1\/16?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1310x1-1\/16 bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1310 series Taper-Lock style bushing, and mounts that component to a 1-1\/16 in shaft. The 1310 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1310x1-1\/16 replace the Dodge 1310 X 1-1\/16 bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1310 series dimensions are an industry standard, and published interchange data crosses the 1310x1-1\/16 directly to the Dodge 1310 X 1-1\/16, as well as Martin 1310 1 1\/16, Gates 1310 1.1\/16, TB Woods TL13101116. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1310x1-1\/16 ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927271198909,"sku":"BB-1310x1-1\/16","price":17.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/4040x3-1_2_579b687b-e9d1-41fe-9cb2-e9340f8e8686.jpg?v=1781209233"},{"product_id":"bb-1310x5-8","title":"1310x5\/8 Taper-Lock® Style Bushing, 5\/8 in Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1310x5\/8 Taper-Lock® Style Bushing, 5\/8 in Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1310x5\/8 is a 1310 series Taper-Lock style bushing with a 5\/8 in bore, machined from solid steel with a black oxide finish. It mounts any 1310-bushed component, including sheaves, sprockets, and timing pulleys, to a 5\/8 in shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310x5\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e5\/8 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTorque Capacity\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e3850 in-lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.7 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBolt Circle\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1.875\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1310-bushed V-belt sheaves, sprockets, and timing pulleys to 5\/8 in shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1310x5\/8 interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310 X 5\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMartin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310.625\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310.5\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTB Woods®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTL131058\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eUS Tsubaki\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310J\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMasterdrive\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310-5\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eOptibelt\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310-5\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eJason Industrial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310-5\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGoodyear\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310X5\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaska\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310X5\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1310x5\/8 bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1310 series Taper-Lock style bushing, and mounts that component to a 5\/8 in shaft. The 1310 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1310x5\/8 replace the Dodge 1310 X 5\/8 bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1310 series dimensions are an industry standard, and published interchange data crosses the 1310x5\/8 directly to the Dodge 1310 X 5\/8, as well as Martin 1310.625, Gates 1310.5\/8, TB Woods TL131058. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1310x5\/8 ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1310x5\/8?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1310x5\/8 bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1310 series Taper-Lock style bushing, and mounts that component to a 5\/8 in shaft. The 1310 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1310x5\/8 replace the Dodge 1310 X 5\/8 bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1310 series dimensions are an industry standard, and published interchange data crosses the 1310x5\/8 directly to the Dodge 1310 X 5\/8, as well as Martin 1310.625, Gates 1310.5\/8, TB Woods TL131058. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1310x5\/8 ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927271231677,"sku":"BB-1310x5\/8","price":17.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/4040x3-1_2_4e19d489-8a6e-4ad5-a263-b528d3796efa.jpg?v=1781209231"},{"product_id":"bb-1210x30mmss","title":"1210x30mmSS Taper-Lock® Style Bushing, 30mm Bore, Stainless steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1210x30mmSS Taper-Lock® Style Bushing, 30mm Bore, Stainless steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x30mmSS is a 1210 series Taper-Lock style bushing with a 30mm bore, machined from solid stainless steel. It mounts any 1210-bushed component, including sheaves, sprockets, and timing pulleys, to a 30mm shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210x30mmSS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e30mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eStainless steel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.45 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1210-bushed V-belt sheaves, sprockets, and timing pulleys to 30mm shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eWash-down, food processing, and corrosive environments\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x30mmSS interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210 X 30MMSS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSS 1210 30MM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1210x30mmSS bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 30mm shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x30mmSS replace the Dodge 1210 X 30MMSS bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1210 series dimensions are an industry standard, and published interchange data crosses the 1210x30mmSS directly to the Dodge 1210 X 30MMSS, as well as Gates SS 1210 30MM. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhy choose a stainless steel bushing like the 1210x30mmSS?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eStainless resists corrosion in wash-down, food processing, chemical, and outdoor service where standard black oxide steel bushings rust. Dimensions match the standard series, so stainless swaps in without changing the component.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x30mmSS ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1210x30mmSS?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1210x30mmSS bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 30mm shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x30mmSS replace the Dodge 1210 X 30MMSS bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1210 series dimensions are an industry standard, and published interchange data crosses the 1210x30mmSS directly to the Dodge 1210 X 30MMSS, as well as Gates SS 1210 30MM. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Why choose a stainless steel bushing like the 1210x30mmSS?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Stainless resists corrosion in wash-down, food processing, chemical, and outdoor service where standard black oxide steel bushings rust. Dimensions match the standard series, so stainless swaps in without changing the component.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x30mmSS ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927271264445,"sku":"BB-1210x30mmSS","price":162.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1210X20MM_9889598e-6af9-4185-9272-66c350d4a903.jpg?v=1781209229"},{"product_id":"bb-1310x11-16","title":"1310x11\/16 Taper-Lock® Style Bushing, 11\/16 in Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1310x11\/16 Taper-Lock® Style Bushing, 11\/16 in Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1310x11\/16 is a 1310 series Taper-Lock style bushing with a 11\/16 in bore, machined from solid steel with a black oxide finish. It mounts any 1310-bushed component, including sheaves, sprockets, and timing pulleys, to a 11\/16 in shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310x11\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e11\/16 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTorque Capacity\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e3850 in-lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.7 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBolt Circle\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1.875\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1310-bushed V-belt sheaves, sprockets, and timing pulleys to 11\/16 in shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1310x11\/16 interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310 X 11\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMartin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310.6875\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310.11\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTB Woods®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTL131011\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eUS Tsubaki\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310K\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMasterdrive\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310-11\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eOptibelt\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310-11\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eJason Industrial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310-11\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGoodyear\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310X11\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaska\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310X11\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1310x11\/16 bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1310 series Taper-Lock style bushing, and mounts that component to a 11\/16 in shaft. The 1310 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1310x11\/16 replace the Dodge 1310 X 11\/16 bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1310 series dimensions are an industry standard, and published interchange data crosses the 1310x11\/16 directly to the Dodge 1310 X 11\/16, as well as Martin 1310.6875, Gates 1310.11\/16, TB Woods TL131011\/16. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1310x11\/16 ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1310x11\/16?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1310x11\/16 bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1310 series Taper-Lock style bushing, and mounts that component to a 11\/16 in shaft. The 1310 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1310x11\/16 replace the Dodge 1310 X 11\/16 bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1310 series dimensions are an industry standard, and published interchange data crosses the 1310x11\/16 directly to the Dodge 1310 X 11\/16, as well as Martin 1310.6875, Gates 1310.11\/16, TB Woods TL131011\/16. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1310x11\/16 ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927271297213,"sku":"BB-1310x11\/16","price":17.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/4040x3-1_2_762b5a1e-3a60-46a1-8f77-56703cef54d0.jpg?v=1781209230"},{"product_id":"bb-1210x5-8","title":"1210x5\/8 Taper-Lock® Style Bushing, 5\/8 in Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1210x5\/8 Taper-Lock® Style Bushing, 5\/8 in Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x5\/8 is a 1210 series Taper-Lock style bushing with a 5\/8 in bore, machined from solid steel with a black oxide finish. It mounts any 1210-bushed component, including sheaves, sprockets, and timing pulleys, to a 5\/8 in shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210x5\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e5\/8 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTorque Capacity\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e3600 in-lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.56 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBolt Circle\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1.75\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1210-bushed V-belt sheaves, sprockets, and timing pulleys to 5\/8 in shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x5\/8 interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210 X 5\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMartin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210.625\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210.5\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTB Woods®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTL121058\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eUS Tsubaki\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210J\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eRegal Rexnord (Browning®)\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210X5\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMasterdrive\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210-5\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eOptibelt\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210-5\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eJason Industrial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210-5\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMcMaster-Carr\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e57095K132\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1210x5\/8 bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 5\/8 in shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x5\/8 replace the Dodge 1210 X 5\/8 bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1210 series dimensions are an industry standard, and published interchange data crosses the 1210x5\/8 directly to the Dodge 1210 X 5\/8, as well as Martin 1210.625, Gates 1210.5\/8, TB Woods TL121058. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x5\/8 ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1210x5\/8?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1210x5\/8 bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 5\/8 in shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x5\/8 replace the Dodge 1210 X 5\/8 bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1210 series dimensions are an industry standard, and published interchange data crosses the 1210x5\/8 directly to the Dodge 1210 X 5\/8, as well as Martin 1210.625, Gates 1210.5\/8, TB Woods TL121058. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x5\/8 ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927271329981,"sku":"BB-1210x5\/8","price":14.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1210X20MM_50f8a473-0daa-404d-bca4-63036fb0e72e.jpg?v=1781209231"},{"product_id":"bb-1210x16mmss","title":"1210x16mmSS Taper-Lock® Style Bushing, 16mm Bore, Stainless steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1210x16mmSS Taper-Lock® Style Bushing, 16mm Bore, Stainless steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x16mmSS is a 1210 series Taper-Lock style bushing with a 16mm bore, machined from solid stainless steel. It mounts any 1210-bushed component, including sheaves, sprockets, and timing pulleys, to a 16mm shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210x16mmSS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eStainless steel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.65 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1210-bushed V-belt sheaves, sprockets, and timing pulleys to 16mm shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eWash-down, food processing, and corrosive environments\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x16mmSS interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210 X 16MMSS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSS 1210 16MM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1210x16mmSS bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 16mm shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x16mmSS replace the Dodge 1210 X 16MMSS bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1210 series dimensions are an industry standard, and published interchange data crosses the 1210x16mmSS directly to the Dodge 1210 X 16MMSS, as well as Gates SS 1210 16MM. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhy choose a stainless steel bushing like the 1210x16mmSS?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eStainless resists corrosion in wash-down, food processing, chemical, and outdoor service where standard black oxide steel bushings rust. Dimensions match the standard series, so stainless swaps in without changing the component.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x16mmSS ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1210x16mmSS?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1210x16mmSS bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 16mm shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x16mmSS replace the Dodge 1210 X 16MMSS bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1210 series dimensions are an industry standard, and published interchange data crosses the 1210x16mmSS directly to the Dodge 1210 X 16MMSS, as well as Gates SS 1210 16MM. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Why choose a stainless steel bushing like the 1210x16mmSS?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Stainless resists corrosion in wash-down, food processing, chemical, and outdoor service where standard black oxide steel bushings rust. Dimensions match the standard series, so stainless swaps in without changing the component.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x16mmSS ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927271362749,"sku":"BB-1210x16mmSS","price":162.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1210X20MM_b3ee7162-ca46-41af-ba11-f3270724ab13.jpg?v=1781209231"},{"product_id":"bb-1215x1-3-16","title":"1215x1-3\/16 Taper-Lock® Style Bushing, 1-3\/16 in Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1215x1-3\/16 Taper-Lock® Style Bushing, 1-3\/16 in Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1215x1-3\/16 is a 1215 series Taper-Lock style bushing with a 1-3\/16 in bore, machined from solid steel with a black oxide finish. It mounts any 1215-bushed component, including sheaves, sprockets, and timing pulleys, to a 1-3\/16 in shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215x1-3\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1-3\/16 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTorque Capacity\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e3550 in-lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.55 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBolt Circle\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1.75\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1215-bushed V-belt sheaves, sprockets, and timing pulleys to 1-3\/16 in shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1215x1-3\/16 interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215 X 1-3\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMartin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215 1 3\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215 1.3\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTB Woods®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTL12151316\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eUS Tsubaki\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215-1C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eRegal Rexnord (Browning®)\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215X 1 3\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMasterdrive\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215-1.3\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eOptibelt\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215-1 3\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eJason Industrial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215-1-3\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGrainger\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e812ZK9\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1215x1-3\/16 bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1215 series Taper-Lock style bushing, and mounts that component to a 1-3\/16 in shaft. The 1215 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1215x1-3\/16 replace the Dodge 1215 X 1-3\/16 bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1215 series dimensions are an industry standard, and published interchange data crosses the 1215x1-3\/16 directly to the Dodge 1215 X 1-3\/16, as well as Martin 1215 1 3\/16, Gates 1215 1.3\/16, TB Woods TL12151316. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1215x1-3\/16 ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1215x1-3\/16?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1215x1-3\/16 bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1215 series Taper-Lock style bushing, and mounts that component to a 1-3\/16 in shaft. The 1215 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1215x1-3\/16 replace the Dodge 1215 X 1-3\/16 bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1215 series dimensions are an industry standard, and published interchange data crosses the 1215x1-3\/16 directly to the Dodge 1215 X 1-3\/16, as well as Martin 1215 1 3\/16, Gates 1215 1.3\/16, TB Woods TL12151316. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1215x1-3\/16 ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927271395517,"sku":"BB-1215x1-3\/16","price":16.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1215X20MM_04da9403-eef0-46ae-a095-67c7b21c8f67.jpg?v=1781209230"},{"product_id":"bb-1215x1-1-4","title":"1215x1-1\/4 Taper-Lock® Style Bushing, 1-1\/4 in Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1215x1-1\/4 Taper-Lock® Style Bushing, 1-1\/4 in Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1215x1-1\/4 is a 1215 series Taper-Lock style bushing with a 1-1\/4 in bore, machined from solid steel with a black oxide finish. It mounts any 1215-bushed component, including sheaves, sprockets, and timing pulleys, to a 1-1\/4 in shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215x1-1\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1-1\/4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTorque Capacity\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e3550 in-lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.465 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBolt Circle\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1.75\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1215-bushed V-belt sheaves, sprockets, and timing pulleys to 1-1\/4 in shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1215x1-1\/4 interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215 X 1-1\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMartin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215 1 1\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215 1.1\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTB Woods®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTL1215114\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eUS Tsubaki\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215-1D\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eRegal Rexnord (Browning®)\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215X 1 1\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMasterdrive\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215-1.1\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eOptibelt\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215-1 1\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eJason Industrial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215-1-1\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMcMaster-Carr\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e57095K147\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1215x1-1\/4 bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1215 series Taper-Lock style bushing, and mounts that component to a 1-1\/4 in shaft. The 1215 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1215x1-1\/4 replace the Dodge 1215 X 1-1\/4 bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1215 series dimensions are an industry standard, and published interchange data crosses the 1215x1-1\/4 directly to the Dodge 1215 X 1-1\/4, as well as Martin 1215 1 1\/4, Gates 1215 1.1\/4, TB Woods TL1215114. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1215x1-1\/4 ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1215x1-1\/4?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1215x1-1\/4 bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1215 series Taper-Lock style bushing, and mounts that component to a 1-1\/4 in shaft. The 1215 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1215x1-1\/4 replace the Dodge 1215 X 1-1\/4 bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1215 series dimensions are an industry standard, and published interchange data crosses the 1215x1-1\/4 directly to the Dodge 1215 X 1-1\/4, as well as Martin 1215 1 1\/4, Gates 1215 1.1\/4, TB Woods TL1215114. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1215x1-1\/4 ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927271428285,"sku":"BB-1215x1-1\/4","price":16.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1215X20MM_a3eb9280-e4d5-41b1-adc7-439d6d221274.jpg?v=1781209230"},{"product_id":"bb-1210x20mmss","title":"1210x20mmSS Taper-Lock® Style Bushing, 20mm Bore, Stainless steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1210x20mmSS Taper-Lock® Style Bushing, 20mm Bore, Stainless steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x20mmSS is a 1210 series Taper-Lock style bushing with a 20mm bore, machined from solid stainless steel. It mounts any 1210-bushed component, including sheaves, sprockets, and timing pulleys, to a 20mm shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210x20mmSS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eStainless steel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.65 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1210-bushed V-belt sheaves, sprockets, and timing pulleys to 20mm shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eWash-down, food processing, and corrosive environments\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x20mmSS interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210 X 20MMSS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSS 1210 20MM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1210x20mmSS bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 20mm shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x20mmSS replace the Dodge 1210 X 20MMSS bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1210 series dimensions are an industry standard, and published interchange data crosses the 1210x20mmSS directly to the Dodge 1210 X 20MMSS, as well as Gates SS 1210 20MM. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhy choose a stainless steel bushing like the 1210x20mmSS?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eStainless resists corrosion in wash-down, food processing, chemical, and outdoor service where standard black oxide steel bushings rust. Dimensions match the standard series, so stainless swaps in without changing the component.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x20mmSS ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1210x20mmSS?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1210x20mmSS bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 20mm shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x20mmSS replace the Dodge 1210 X 20MMSS bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1210 series dimensions are an industry standard, and published interchange data crosses the 1210x20mmSS directly to the Dodge 1210 X 20MMSS, as well as Gates SS 1210 20MM. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Why choose a stainless steel bushing like the 1210x20mmSS?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Stainless resists corrosion in wash-down, food processing, chemical, and outdoor service where standard black oxide steel bushings rust. Dimensions match the standard series, so stainless swaps in without changing the component.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x20mmSS ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927271493821,"sku":"BB-1210x20mmSS","price":162.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1210X20MM_a8048e68-b34c-4bc2-988c-6258075a7be7.jpg?v=1781209230"},{"product_id":"bb-1215x32mm","title":"1215x32mm Taper-Lock® Style Bushing, 32mm Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1215x32mm Taper-Lock® Style Bushing, 32mm Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1215x32mm is a 1215 series Taper-Lock style bushing with a 32mm bore, machined from solid steel with a black oxide finish. It mounts any 1215-bushed component, including sheaves, sprockets, and timing pulleys, to a 32mm shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215x32mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e32mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTorque Capacity\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e3550 in-lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.45 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBolt Circle\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1.75\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1215-bushed V-belt sheaves, sprockets, and timing pulleys to 32mm shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1215x32mm interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215 X 32MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMartin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215 32MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215 32MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTB Woods®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTL121532MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMasterdrive\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215-32MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eOptibelt\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215-32\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1215x32mm bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1215 series Taper-Lock style bushing, and mounts that component to a 32mm shaft. The 1215 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1215x32mm replace the Dodge 1215 X 32MM bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1215 series dimensions are an industry standard, and published interchange data crosses the 1215x32mm directly to the Dodge 1215 X 32MM, as well as Martin 1215 32MM, Gates 1215 32MM, TB Woods TL121532MM. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1215x32mm ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1215x32mm?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1215x32mm bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1215 series Taper-Lock style bushing, and mounts that component to a 32mm shaft. The 1215 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1215x32mm replace the Dodge 1215 X 32MM bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1215 series dimensions are an industry standard, and published interchange data crosses the 1215x32mm directly to the Dodge 1215 X 32MM, as well as Martin 1215 32MM, Gates 1215 32MM, TB Woods TL121532MM. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1215x32mm ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927271526589,"sku":"BB-1215x32mm","price":16.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1215X20MM_614ebc8a-e781-4f07-a07f-461049b73cb5.jpg?v=1781209230"},{"product_id":"bb-1215xmpb","title":"1215XMPB Taper-Lock® Style Bushing, Minimum Plain Bore, Steel","description":"\u003cp style=\"color: #5a6478 !important; font-size: 14px !important; line-height: 1.5 !important; font-style: italic !important; margin: 0 0 16px 0 !important; padding: 10px 14px !important; background: #f5f6f8 !important; border-left: 3px solid #1e2d4d !important;\"\u003eRepresentative image shown. Actual product appearance varies by size, bore, and configuration. Refer to the specifications table for exact dimensions of this part number.\u003c\/p\u003e\n\n\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1215XMPB Taper-Lock® Style Bushing, Minimum Plain Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1215XMPB is a 1215 series Taper-Lock style bushing supplied with a minimum plain bore for finishing to your shaft size, machined from solid steel with a black oxide finish. It mounts any 1215-bushed component, including sheaves, sprockets, and timing pulleys. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215XMPB\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eMinimum plain bore (finish to size)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.761 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1215-bushed V-belt sheaves, sprockets, and timing pulleys\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1215 Taper-Lock style designation is an industry standard. The 1215XMPB fits any component machined for the same series.\u003c\/p\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1215XMPB bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1215 series Taper-Lock style bushing. The 1215 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does minimum plain bore mean on the 1215XMPB?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt ships with a small pilot bore and is machined to your exact shaft size and keyway before installation. Call (888) 203-2358 if you need it finished to a specific bore before shipping.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1215XMPB ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1215XMPB?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1215XMPB bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1215 series Taper-Lock style bushing. The 1215 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does minimum plain bore mean on the 1215XMPB?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It ships with a small pilot bore and is machined to your exact shaft size and keyway before installation. Call (888) 203-2358 if you need it finished to a specific bore before shipping.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1215XMPB ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927271592125,"sku":"BB-1215XMPB","price":16.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/bb-generic-bushings_ea293d78-bf17-4b98-8368-be2977fbaa56.jpg?v=1781209230"},{"product_id":"bb-1008x16mm","title":"1008x16mm Taper-Lock® Style Bushing, 16mm Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1008x16mm Taper-Lock® Style Bushing, 16mm Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1008x16mm is a 1008 series Taper-Lock style bushing with a 16mm bore, machined from solid steel with a black oxide finish. It mounts any 1008-bushed component, including sheaves, sprockets, and timing pulleys, to a 16mm shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008x16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.152 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1008-bushed V-belt sheaves, sprockets, and timing pulleys to 16mm shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1008 Taper-Lock style designation is an industry standard. The 1008x16mm fits any component machined for the same series, with a 16mm bore.\u003c\/p\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1008x16mm bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1008 series Taper-Lock style bushing, and mounts that component to a 16mm shaft. The 1008 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1008x16mm ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1008x16mm?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1008x16mm bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1008 series Taper-Lock style bushing, and mounts that component to a 16mm shaft. The 1008 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1008x16mm ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927271657661,"sku":"BB-1008x16mm","price":12.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1008X20MM_bfa9f7c3-0431-4937-8693-34050ccd2bf2.jpg?v=1781209229"},{"product_id":"bb-1215x5-8","title":"1215x5\/8 Taper-Lock® Style Bushing, 5\/8 in Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1215x5\/8 Taper-Lock® Style Bushing, 5\/8 in Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1215x5\/8 is a 1215 series Taper-Lock style bushing with a 5\/8 in bore, machined from solid steel with a black oxide finish. It mounts any 1215-bushed component, including sheaves, sprockets, and timing pulleys, to a 5\/8 in shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215x5\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e5\/8 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTorque Capacity\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e3550 in-lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.8 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBolt Circle\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1.75\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1215-bushed V-belt sheaves, sprockets, and timing pulleys to 5\/8 in shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1215x5\/8 interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215 X 5\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMartin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215.625\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215.5\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTB Woods®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTL121558\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eUS Tsubaki\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215J\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eRegal Rexnord (Browning®)\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215X5\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMasterdrive\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215-5\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eOptibelt\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215-5\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eJason Industrial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215-5\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMcMaster-Carr\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e57095K142\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1215x5\/8 bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1215 series Taper-Lock style bushing, and mounts that component to a 5\/8 in shaft. The 1215 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1215x5\/8 replace the Dodge 1215 X 5\/8 bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1215 series dimensions are an industry standard, and published interchange data crosses the 1215x5\/8 directly to the Dodge 1215 X 5\/8, as well as Martin 1215.625, Gates 1215.5\/8, TB Woods TL121558. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1215x5\/8 ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1215x5\/8?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1215x5\/8 bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1215 series Taper-Lock style bushing, and mounts that component to a 5\/8 in shaft. The 1215 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1215x5\/8 replace the Dodge 1215 X 5\/8 bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1215 series dimensions are an industry standard, and published interchange data crosses the 1215x5\/8 directly to the Dodge 1215 X 5\/8, as well as Martin 1215.625, Gates 1215.5\/8, TB Woods TL121558. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1215x5\/8 ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927271755965,"sku":"BB-1215x5\/8","price":16.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1215X20MM_9d4b1fa0-8749-4f04-9aca-a3f0f5c6bf1d.jpg?v=1781209230"},{"product_id":"bb-1008x18mm","title":"1008x18mm Taper-Lock® Style Bushing, 18mm Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1008x18mm Taper-Lock® Style Bushing, 18mm Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1008x18mm is a 1008 series Taper-Lock style bushing with a 18mm bore, machined from solid steel with a black oxide finish. It mounts any 1008-bushed component, including sheaves, sprockets, and timing pulleys, to a 18mm shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008x18mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e18mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.271 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1008-bushed V-belt sheaves, sprockets, and timing pulleys to 18mm shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1008 Taper-Lock style designation is an industry standard. The 1008x18mm fits any component machined for the same series, with a 18mm bore.\u003c\/p\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1008x18mm bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1008 series Taper-Lock style bushing, and mounts that component to a 18mm shaft. The 1008 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1008x18mm ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1008x18mm?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1008x18mm bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1008 series Taper-Lock style bushing, and mounts that component to a 18mm shaft. The 1008 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1008x18mm ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927271690429,"sku":"BB-1008x18mm","price":12.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1008X20MM_d93575b9-9cab-4cd7-8b36-83b63dd62138.jpg?v=1781209230"},{"product_id":"bb-1215x9-16","title":"1215x9\/16 Taper-Lock® Style Bushing, 9\/16 in Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1215x9\/16 Taper-Lock® Style Bushing, 9\/16 in Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1215x9\/16 is a 1215 series Taper-Lock style bushing with a 9\/16 in bore, machined from solid steel with a black oxide finish. It mounts any 1215-bushed component, including sheaves, sprockets, and timing pulleys, to a 9\/16 in shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215x9\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e9\/16 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTorque Capacity\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e3550 in-lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.8 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBolt Circle\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1.75\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1215-bushed V-belt sheaves, sprockets, and timing pulleys to 9\/16 in shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1215x9\/16 interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215 X 9\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMartin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215.5625\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215.9\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTB Woods®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTL12159\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eUS Tsubaki\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215I\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eRegal Rexnord (Browning®)\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215X9\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMasterdrive\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215-9\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eOptibelt\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215-9\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eJason Industrial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215-9\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGrainger\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e812ZL4\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1215x9\/16 bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1215 series Taper-Lock style bushing, and mounts that component to a 9\/16 in shaft. The 1215 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1215x9\/16 replace the Dodge 1215 X 9\/16 bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1215 series dimensions are an industry standard, and published interchange data crosses the 1215x9\/16 directly to the Dodge 1215 X 9\/16, as well as Martin 1215.5625, Gates 1215.9\/16, TB Woods TL12159\/16. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1215x9\/16 ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1215x9\/16?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1215x9\/16 bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1215 series Taper-Lock style bushing, and mounts that component to a 9\/16 in shaft. The 1215 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1215x9\/16 replace the Dodge 1215 X 9\/16 bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1215 series dimensions are an industry standard, and published interchange data crosses the 1215x9\/16 directly to the Dodge 1215 X 9\/16, as well as Martin 1215.5625, Gates 1215.9\/16, TB Woods TL12159\/16. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1215x9\/16 ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927271821501,"sku":"BB-1215x9\/16","price":16.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1215X20MM_1ced0300-7b1c-4c33-af88-e1ec56671b11.jpg?v=1781209231"},{"product_id":"bb-1310x1-7-16","title":"1310x1-7\/16 Taper-Lock® Style Bushing, 1-7\/16 in Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1310x1-7\/16 Taper-Lock® Style Bushing, 1-7\/16 in Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1310x1-7\/16 is a 1310 series Taper-Lock style bushing with a 1-7\/16 in bore, machined from solid steel with a black oxide finish. It mounts any 1310-bushed component, including sheaves, sprockets, and timing pulleys, to a 1-7\/16 in shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310x1-7\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1-7\/16 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTorque Capacity\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e3850 in-lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.45 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBolt Circle\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1.875\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1310-bushed V-belt sheaves, sprockets, and timing pulleys to 1-7\/16 in shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1310x1-7\/16 interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310 X 1-7\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMartin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310 1 7\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310 1.7\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTB Woods®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTL13101716\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eJason Industrial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310-1-7\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMcMaster-Carr\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e57095K259\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGoodyear\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310X1-7\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaska\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310X1-7\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1310x1-7\/16 bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1310 series Taper-Lock style bushing, and mounts that component to a 1-7\/16 in shaft. The 1310 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1310x1-7\/16 replace the Dodge 1310 X 1-7\/16 bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1310 series dimensions are an industry standard, and published interchange data crosses the 1310x1-7\/16 directly to the Dodge 1310 X 1-7\/16, as well as Martin 1310 1 7\/16, Gates 1310 1.7\/16, TB Woods TL13101716. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1310x1-7\/16 ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1310x1-7\/16?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1310x1-7\/16 bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1310 series Taper-Lock style bushing, and mounts that component to a 1-7\/16 in shaft. The 1310 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1310x1-7\/16 replace the Dodge 1310 X 1-7\/16 bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1310 series dimensions are an industry standard, and published interchange data crosses the 1310x1-7\/16 directly to the Dodge 1310 X 1-7\/16, as well as Martin 1310 1 7\/16, Gates 1310 1.7\/16, TB Woods TL13101716. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1310x1-7\/16 ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927271854269,"sku":"BB-1310x1-7\/16","price":17.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/4040x3-1_2_7dd96654-27eb-4494-a8e4-4f19f8690820.jpg?v=1781209230"},{"product_id":"bb-1310x9-16","title":"1310x9\/16 Taper-Lock® Style Bushing, 9\/16 in Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1310x9\/16 Taper-Lock® Style Bushing, 9\/16 in Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1310x9\/16 is a 1310 series Taper-Lock style bushing with a 9\/16 in bore, machined from solid steel with a black oxide finish. It mounts any 1310-bushed component, including sheaves, sprockets, and timing pulleys, to a 9\/16 in shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310x9\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e9\/16 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTorque Capacity\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e3850 in-lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.6 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBolt Circle\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1.875\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1310-bushed V-belt sheaves, sprockets, and timing pulleys to 9\/16 in shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1310x9\/16 interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310 X 9\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMartin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310.5625\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310.9\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTB Woods®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTL13109\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eUS Tsubaki\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310I\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMasterdrive\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310-9\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eOptibelt\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310-9\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eJason Industrial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310-9\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGoodyear\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310X9\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaska\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310X9\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1310x9\/16 bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1310 series Taper-Lock style bushing, and mounts that component to a 9\/16 in shaft. The 1310 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1310x9\/16 replace the Dodge 1310 X 9\/16 bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1310 series dimensions are an industry standard, and published interchange data crosses the 1310x9\/16 directly to the Dodge 1310 X 9\/16, as well as Martin 1310.5625, Gates 1310.9\/16, TB Woods TL13109\/16. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1310x9\/16 ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1310x9\/16?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1310x9\/16 bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1310 series Taper-Lock style bushing, and mounts that component to a 9\/16 in shaft. The 1310 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1310x9\/16 replace the Dodge 1310 X 9\/16 bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1310 series dimensions are an industry standard, and published interchange data crosses the 1310x9\/16 directly to the Dodge 1310 X 9\/16, as well as Martin 1310.5625, Gates 1310.9\/16, TB Woods TL13109\/16. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1310x9\/16 ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927271788733,"sku":"BB-1310x9\/16","price":17.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/4040x3-1_2_91623970-8621-41e1-afdd-13599fb44d6f.jpg?v=1781209230"},{"product_id":"bb-1008x25mm","title":"1008x25mm Taper-Lock® Style Bushing, 25mm Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1008x25mm Taper-Lock® Style Bushing, 25mm Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1008x25mm is a 1008 series Taper-Lock style bushing with a 25mm bore, machined from solid steel with a black oxide finish. It mounts any 1008-bushed component, including sheaves, sprockets, and timing pulleys, to a 25mm shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008x25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTorque Capacity\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1200 in-lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.159 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBolt Circle\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1.328125\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1008-bushed V-belt sheaves, sprockets, and timing pulleys to 25mm shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1008x25mm interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008 X 25MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMartin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008 25MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008 25MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTB Woods®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTL100825MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMasterdrive\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008-25MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eOptibelt\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008-25\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaska\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008X25MM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1008x25mm bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1008 series Taper-Lock style bushing, and mounts that component to a 25mm shaft. The 1008 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1008x25mm replace the Dodge 1008 X 25MM bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1008 series dimensions are an industry standard, and published interchange data crosses the 1008x25mm directly to the Dodge 1008 X 25MM, as well as Martin 1008 25MM, Gates 1008 25MM, TB Woods TL100825MM. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1008x25mm ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1008x25mm?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1008x25mm bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1008 series Taper-Lock style bushing, and mounts that component to a 25mm shaft. The 1008 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1008x25mm replace the Dodge 1008 X 25MM bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1008 series dimensions are an industry standard, and published interchange data crosses the 1008x25mm directly to the Dodge 1008 X 25MM, as well as Martin 1008 25MM, Gates 1008 25MM, TB Woods TL100825MM. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1008x25mm ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927271919805,"sku":"BB-1008x25mm","price":12.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1008X20MM_b0a48e81-6a58-4422-85f3-a6d4236c0c09.jpg?v=1781209230"},{"product_id":"bb-1210x28mmss","title":"1210x28mmSS Taper-Lock® Style Bushing, 28mm Bore, Stainless steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1210x28mmSS Taper-Lock® Style Bushing, 28mm Bore, Stainless steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x28mmSS is a 1210 series Taper-Lock style bushing with a 28mm bore, machined from solid stainless steel. It mounts any 1210-bushed component, including sheaves, sprockets, and timing pulleys, to a 28mm shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210x28mmSS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e28mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eStainless steel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.666 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1210-bushed V-belt sheaves, sprockets, and timing pulleys to 28mm shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eWash-down, food processing, and corrosive environments\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x28mmSS interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210 X 28MMSS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSS 1210 28MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaska\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210X28MMSS\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1210x28mmSS bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 28mm shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x28mmSS replace the Dodge 1210 X 28MMSS bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1210 series dimensions are an industry standard, and published interchange data crosses the 1210x28mmSS directly to the Dodge 1210 X 28MMSS, as well as Gates SS 1210 28MM, Maska 1210X28MMSS. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhy choose a stainless steel bushing like the 1210x28mmSS?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eStainless resists corrosion in wash-down, food processing, chemical, and outdoor service where standard black oxide steel bushings rust. Dimensions match the standard series, so stainless swaps in without changing the component.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x28mmSS ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1210x28mmSS?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1210x28mmSS bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 28mm shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x28mmSS replace the Dodge 1210 X 28MMSS bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1210 series dimensions are an industry standard, and published interchange data crosses the 1210x28mmSS directly to the Dodge 1210 X 28MMSS, as well as Gates SS 1210 28MM, Maska 1210X28MMSS. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Why choose a stainless steel bushing like the 1210x28mmSS?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Stainless resists corrosion in wash-down, food processing, chemical, and outdoor service where standard black oxide steel bushings rust. Dimensions match the standard series, so stainless swaps in without changing the component.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x28mmSS ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927271887037,"sku":"BB-1210x28mmSS","price":162.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1210X20MM_8501b4da-b86f-4813-a727-a4eadd2cccc0.jpg?v=1781209230"},{"product_id":"bb-1210x7-8","title":"1210x7\/8 Taper-Lock® Style Bushing, 7\/8 in Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1210x7\/8 Taper-Lock® Style Bushing, 7\/8 in Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x7\/8 is a 1210 series Taper-Lock style bushing with a 7\/8 in bore, machined from solid steel with a black oxide finish. It mounts any 1210-bushed component, including sheaves, sprockets, and timing pulleys, to a 7\/8 in shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210x7\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e7\/8 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTorque Capacity\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e3600 in-lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.507 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBolt Circle\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1.75\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1210-bushed V-belt sheaves, sprockets, and timing pulleys to 7\/8 in shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x7\/8 interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210 X 7\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMartin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210.875\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210.7\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTB Woods®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTL121078\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eUS Tsubaki\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210P\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eRegal Rexnord (Browning®)\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210X7\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMasterdrive\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210-7\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eOptibelt\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210-7\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eJason Industrial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210-7\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMcMaster-Carr\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e57095K137\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1210x7\/8 bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 7\/8 in shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x7\/8 replace the Dodge 1210 X 7\/8 bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1210 series dimensions are an industry standard, and published interchange data crosses the 1210x7\/8 directly to the Dodge 1210 X 7\/8, as well as Martin 1210.875, Gates 1210.7\/8, TB Woods TL121078. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x7\/8 ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1210x7\/8?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1210x7\/8 bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 7\/8 in shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x7\/8 replace the Dodge 1210 X 7\/8 bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1210 series dimensions are an industry standard, and published interchange data crosses the 1210x7\/8 directly to the Dodge 1210 X 7\/8, as well as Martin 1210.875, Gates 1210.7\/8, TB Woods TL121078. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x7\/8 ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927272018109,"sku":"BB-1210x7\/8","price":14.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1210X20MM_9f20cc3e-a7fd-4d3c-a8ed-d80f3dcb82db.jpg?v=1781209231"},{"product_id":"bb-1310x1-2","title":"1310x1\/2 Taper-Lock® Style Bushing, 1\/2 in Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1310x1\/2 Taper-Lock® Style Bushing, 1\/2 in Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1310x1\/2 is a 1310 series Taper-Lock style bushing with a 1\/2 in bore, machined from solid steel with a black oxide finish. It mounts any 1310-bushed component, including sheaves, sprockets, and timing pulleys, to a 1\/2 in shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310x1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1\/2 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTorque Capacity\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e3850 in-lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.7 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBolt Circle\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1.875\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1310-bushed V-belt sheaves, sprockets, and timing pulleys to 1\/2 in shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1310x1\/2 interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310 X 1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMartin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310.5\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310.1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTB Woods®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTL131012\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eUS Tsubaki\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310H\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMasterdrive\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310-1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eOptibelt\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310-1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eJason Industrial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310-1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGoodyear\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310X1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaska\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1310X1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1310x1\/2 bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1310 series Taper-Lock style bushing, and mounts that component to a 1\/2 in shaft. The 1310 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1310x1\/2 replace the Dodge 1310 X 1\/2 bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1310 series dimensions are an industry standard, and published interchange data crosses the 1310x1\/2 directly to the Dodge 1310 X 1\/2, as well as Martin 1310.5, Gates 1310.1\/2, TB Woods TL131012. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1310x1\/2 ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1310x1\/2?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1310x1\/2 bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1310 series Taper-Lock style bushing, and mounts that component to a 1\/2 in shaft. The 1310 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1310x1\/2 replace the Dodge 1310 X 1\/2 bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1310 series dimensions are an industry standard, and published interchange data crosses the 1310x1\/2 directly to the Dodge 1310 X 1\/2, as well as Martin 1310.5, Gates 1310.1\/2, TB Woods TL131012. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1310x1\/2 ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927272050877,"sku":"BB-1310x1\/2","price":17.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/4040x3-1_2_6fa39339-73a5-4dce-b6f3-291f2f1918d4.jpg?v=1781209231"},{"product_id":"bb-1210x5-8ss","title":"1210x5\/8SS Taper-Lock® Style Bushing, 5\/8 in Bore, Stainless steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1210x5\/8SS Taper-Lock® Style Bushing, 5\/8 in Bore, Stainless steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x5\/8SS is a 1210 series Taper-Lock style bushing with a 5\/8 in bore, machined from solid stainless steel. It mounts any 1210-bushed component, including sheaves, sprockets, and timing pulleys, to a 5\/8 in shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210x5\/8SS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e5\/8 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eStainless steel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.666 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1210-bushed V-belt sheaves, sprockets, and timing pulleys to 5\/8 in shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eWash-down, food processing, and corrosive environments\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x5\/8SS interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210 X 5\/8SS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSS 1210 .5\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1210x5\/8SS bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 5\/8 in shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x5\/8SS replace the Dodge 1210 X 5\/8SS bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1210 series dimensions are an industry standard, and published interchange data crosses the 1210x5\/8SS directly to the Dodge 1210 X 5\/8SS, as well as Gates SS 1210 .5\/8. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhy choose a stainless steel bushing like the 1210x5\/8SS?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eStainless resists corrosion in wash-down, food processing, chemical, and outdoor service where standard black oxide steel bushings rust. Dimensions match the standard series, so stainless swaps in without changing the component.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x5\/8SS ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1210x5\/8SS?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1210x5\/8SS bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 5\/8 in shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x5\/8SS replace the Dodge 1210 X 5\/8SS bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1210 series dimensions are an industry standard, and published interchange data crosses the 1210x5\/8SS directly to the Dodge 1210 X 5\/8SS, as well as Gates SS 1210 .5\/8. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Why choose a stainless steel bushing like the 1210x5\/8SS?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Stainless resists corrosion in wash-down, food processing, chemical, and outdoor service where standard black oxide steel bushings rust. Dimensions match the standard series, so stainless swaps in without changing the component.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x5\/8SS ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927271985341,"sku":"BB-1210x5\/8SS","price":146.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1210X20MM_1d1d8dc9-9e39-463d-aa2b-683e0bdd4a71.jpg?v=1781209229"},{"product_id":"bb-1210x7-8ss","title":"1210x7\/8SS Taper-Lock® Style Bushing, 7\/8 in Bore, Stainless steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1210x7\/8SS Taper-Lock® Style Bushing, 7\/8 in Bore, Stainless steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x7\/8SS is a 1210 series Taper-Lock style bushing with a 7\/8 in bore, machined from solid stainless steel. It mounts any 1210-bushed component, including sheaves, sprockets, and timing pulleys, to a 7\/8 in shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210x7\/8SS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e7\/8 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eStainless steel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.65 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1210-bushed V-belt sheaves, sprockets, and timing pulleys to 7\/8 in shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eWash-down, food processing, and corrosive environments\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x7\/8SS interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210 X 7\/8SS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSS 1210 .7\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1210x7\/8SS bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 7\/8 in shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x7\/8SS replace the Dodge 1210 X 7\/8SS bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1210 series dimensions are an industry standard, and published interchange data crosses the 1210x7\/8SS directly to the Dodge 1210 X 7\/8SS, as well as Gates SS 1210 .7\/8. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhy choose a stainless steel bushing like the 1210x7\/8SS?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eStainless resists corrosion in wash-down, food processing, chemical, and outdoor service where standard black oxide steel bushings rust. Dimensions match the standard series, so stainless swaps in without changing the component.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x7\/8SS ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1210x7\/8SS?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1210x7\/8SS bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 7\/8 in shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x7\/8SS replace the Dodge 1210 X 7\/8SS bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1210 series dimensions are an industry standard, and published interchange data crosses the 1210x7\/8SS directly to the Dodge 1210 X 7\/8SS, as well as Gates SS 1210 .7\/8. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Why choose a stainless steel bushing like the 1210x7\/8SS?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Stainless resists corrosion in wash-down, food processing, chemical, and outdoor service where standard black oxide steel bushings rust. Dimensions match the standard series, so stainless swaps in without changing the component.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x7\/8SS ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927271952573,"sku":"BB-1210x7\/8SS","price":146.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1210X20MM_04cc1f84-7103-4485-855c-86539075cc62.jpg?v=1781209231"},{"product_id":"bb-1210x9-16","title":"1210x9\/16 Taper-Lock® Style Bushing, 9\/16 in Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1210x9\/16 Taper-Lock® Style Bushing, 9\/16 in Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x9\/16 is a 1210 series Taper-Lock style bushing with a 9\/16 in bore, machined from solid steel with a black oxide finish. It mounts any 1210-bushed component, including sheaves, sprockets, and timing pulleys, to a 9\/16 in shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210x9\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e9\/16 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTorque Capacity\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e3600 in-lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.606 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBolt Circle\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1.75\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1210-bushed V-belt sheaves, sprockets, and timing pulleys to 9\/16 in shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x9\/16 interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210 X 9\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMartin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210.5625\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210.9\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTB Woods®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTL12109\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eUS Tsubaki\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210I\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eRegal Rexnord (Browning®)\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210X9\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMasterdrive\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210-9\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eOptibelt\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210-9\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eJason Industrial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210-9\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGrainger\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e812ZJ1\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1210x9\/16 bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 9\/16 in shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x9\/16 replace the Dodge 1210 X 9\/16 bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1210 series dimensions are an industry standard, and published interchange data crosses the 1210x9\/16 directly to the Dodge 1210 X 9\/16, as well as Martin 1210.5625, Gates 1210.9\/16, TB Woods TL12109\/16. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x9\/16 ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1210x9\/16?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1210x9\/16 bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 9\/16 in shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x9\/16 replace the Dodge 1210 X 9\/16 bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1210 series dimensions are an industry standard, and published interchange data crosses the 1210x9\/16 directly to the Dodge 1210 X 9\/16, as well as Martin 1210.5625, Gates 1210.9\/16, TB Woods TL12109\/16. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x9\/16 ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927272214717,"sku":"BB-1210x9\/16","price":14.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1210X20MM_f0fca518-b168-45c2-bcf1-2b1621a11581.jpg?v=1781209230"},{"product_id":"bb-1008x13-16","title":"1008x13\/16 Taper-Lock® Style Bushing, 13\/16 in Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1008x13\/16 Taper-Lock® Style Bushing, 13\/16 in Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1008x13\/16 is a 1008 series Taper-Lock style bushing with a 13\/16 in bore, machined from solid steel with a black oxide finish. It mounts any 1008-bushed component, including sheaves, sprockets, and timing pulleys, to a 13\/16 in shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008x13\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e13\/16 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTorque Capacity\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1200 in-lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.218 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBolt Circle\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1.328125\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1008-bushed V-belt sheaves, sprockets, and timing pulleys to 13\/16 in shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1008x13\/16 interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008 X 13\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMartin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008.8125\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008.13\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTB Woods®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTL10081316\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eUS Tsubaki\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008M\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eRegal Rexnord (Browning®)\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008X13\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMasterdrive\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008-13\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eOptibelt\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008-13\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eJason Industrial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1008-13\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGrainger\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e812ZD7\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1008x13\/16 bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1008 series Taper-Lock style bushing, and mounts that component to a 13\/16 in shaft. The 1008 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1008x13\/16 replace the Dodge 1008 X 13\/16 bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1008 series dimensions are an industry standard, and published interchange data crosses the 1008x13\/16 directly to the Dodge 1008 X 13\/16, as well as Martin 1008.8125, Gates 1008.13\/16, TB Woods TL10081316. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1008x13\/16 ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1008x13\/16?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1008x13\/16 bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1008 series Taper-Lock style bushing, and mounts that component to a 13\/16 in shaft. The 1008 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1008x13\/16 replace the Dodge 1008 X 13\/16 bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1008 series dimensions are an industry standard, and published interchange data crosses the 1008x13\/16 directly to the Dodge 1008 X 13\/16, as well as Martin 1008.8125, Gates 1008.13\/16, TB Woods TL10081316. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1008x13\/16 ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927272149181,"sku":"BB-1008x13\/16","price":12.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1008X20MM_d96a671b-2951-45b5-91d1-bc9baa79d3bd.jpg?v=1781209230"},{"product_id":"bb-1215x11-16","title":"1215x11\/16 Taper-Lock® Style Bushing, 11\/16 in Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1215x11\/16 Taper-Lock® Style Bushing, 11\/16 in Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1215x11\/16 is a 1215 series Taper-Lock style bushing with a 11\/16 in bore, machined from solid steel with a black oxide finish. It mounts any 1215-bushed component, including sheaves, sprockets, and timing pulleys, to a 11\/16 in shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215x11\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e11\/16 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTorque Capacity\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e3550 in-lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.7 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBolt Circle\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1.75\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1215-bushed V-belt sheaves, sprockets, and timing pulleys to 11\/16 in shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1215x11\/16 interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215 X 11\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMartin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215.6875\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215.11\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTB Woods®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTL121511\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eUS Tsubaki\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215K\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eRegal Rexnord (Browning®)\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215X11\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMasterdrive\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215-11\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eOptibelt\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215-11\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eJason Industrial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215-11\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGrainger\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e812ZK4\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1215x11\/16 bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1215 series Taper-Lock style bushing, and mounts that component to a 11\/16 in shaft. The 1215 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1215x11\/16 replace the Dodge 1215 X 11\/16 bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1215 series dimensions are an industry standard, and published interchange data crosses the 1215x11\/16 directly to the Dodge 1215 X 11\/16, as well as Martin 1215.6875, Gates 1215.11\/16, TB Woods TL121511\/16. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1215x11\/16 ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1215x11\/16?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1215x11\/16 bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1215 series Taper-Lock style bushing, and mounts that component to a 11\/16 in shaft. The 1215 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1215x11\/16 replace the Dodge 1215 X 11\/16 bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1215 series dimensions are an industry standard, and published interchange data crosses the 1215x11\/16 directly to the Dodge 1215 X 11\/16, as well as Martin 1215.6875, Gates 1215.11\/16, TB Woods TL121511\/16. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1215x11\/16 ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927272181949,"sku":"BB-1215x11\/16","price":16.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1215X20MM_0d3c138f-d541-4135-a244-be8314429c8a.jpg?v=1781209229"},{"product_id":"bb-1215x20mm","title":"1215x20mm Taper-Lock® Style Bushing, 20mm Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1215x20mm Taper-Lock® Style Bushing, 20mm Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1215x20mm is a 1215 series Taper-Lock style bushing with a 20mm bore, machined from solid steel with a black oxide finish. It mounts any 1215-bushed component, including sheaves, sprockets, and timing pulleys, to a 20mm shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215x20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTorque Capacity\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e3550 in-lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.745 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBolt Circle\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1.75\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1215-bushed V-belt sheaves, sprockets, and timing pulleys to 20mm shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1215x20mm interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215 X 20MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMartin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215 20MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215 20MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTB Woods®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTL121520MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMasterdrive\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215-20MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eOptibelt\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215-20\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1215x20mm bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1215 series Taper-Lock style bushing, and mounts that component to a 20mm shaft. The 1215 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1215x20mm replace the Dodge 1215 X 20MM bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1215 series dimensions are an industry standard, and published interchange data crosses the 1215x20mm directly to the Dodge 1215 X 20MM, as well as Martin 1215 20MM, Gates 1215 20MM, TB Woods TL121520MM. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1215x20mm ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1215x20mm?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1215x20mm bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1215 series Taper-Lock style bushing, and mounts that component to a 20mm shaft. The 1215 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1215x20mm replace the Dodge 1215 X 20MM bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1215 series dimensions are an industry standard, and published interchange data crosses the 1215x20mm directly to the Dodge 1215 X 20MM, as well as Martin 1215 20MM, Gates 1215 20MM, TB Woods TL121520MM. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1215x20mm ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927272247485,"sku":"BB-1215x20mm","price":16.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1215X20MM_5ae69d06-a351-4a61-8ee6-c273913ba6f9.jpg?v=1781209230"},{"product_id":"bb-1215x15-16","title":"1215x15\/16 Taper-Lock® Style Bushing, 15\/16 in Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1215x15\/16 Taper-Lock® Style Bushing, 15\/16 in Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1215x15\/16 is a 1215 series Taper-Lock style bushing with a 15\/16 in bore, machined from solid steel with a black oxide finish. It mounts any 1215-bushed component, including sheaves, sprockets, and timing pulleys, to a 15\/16 in shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215x15\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e15\/16 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTorque Capacity\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e3550 in-lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.75 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBolt Circle\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1.75\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1215-bushed V-belt sheaves, sprockets, and timing pulleys to 15\/16 in shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1215x15\/16 interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215 X 15\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMartin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215.9375\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215.15\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eTB Woods®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTL121515\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eUS Tsubaki\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215R\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eRegal Rexnord (Browning®)\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215X15\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMasterdrive\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215-15\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eOptibelt\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215-15\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eJason Industrial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1215-15\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGrainger\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e812ZL0\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1215x15\/16 bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1215 series Taper-Lock style bushing, and mounts that component to a 15\/16 in shaft. The 1215 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1215x15\/16 replace the Dodge 1215 X 15\/16 bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1215 series dimensions are an industry standard, and published interchange data crosses the 1215x15\/16 directly to the Dodge 1215 X 15\/16, as well as Martin 1215.9375, Gates 1215.15\/16, TB Woods TL121515\/16. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1215x15\/16 ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1215x15\/16?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1215x15\/16 bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1215 series Taper-Lock style bushing, and mounts that component to a 15\/16 in shaft. The 1215 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1215x15\/16 replace the Dodge 1215 X 15\/16 bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1215 series dimensions are an industry standard, and published interchange data crosses the 1215x15\/16 directly to the Dodge 1215 X 15\/16, as well as Martin 1215.9375, Gates 1215.15\/16, TB Woods TL121515\/16. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1215x15\/16 ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927272280253,"sku":"BB-1215x15\/16","price":16.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1215X20MM_78423928-a208-4651-b14e-36747ba0d775.jpg?v=1781209229"},{"product_id":"bb-1210x19mm","title":"1210x19mm Taper-Lock® Style Bushing, 19mm Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1210x19mm Taper-Lock® Style Bushing, 19mm Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x19mm is a 1210 series Taper-Lock style bushing with a 19mm bore, machined from solid steel with a black oxide finish. It mounts any 1210-bushed component, including sheaves, sprockets, and timing pulleys, to a 19mm shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210x19mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e19mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.653 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1210-bushed V-belt sheaves, sprockets, and timing pulleys to 19mm shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210 Taper-Lock style designation is an industry standard. The 1210x19mm fits any component machined for the same series, with a 19mm bore.\u003c\/p\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1210x19mm bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 19mm shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x19mm ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1210x19mm?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1210x19mm bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 19mm shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x19mm ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927272313021,"sku":"BB-1210x19mm","price":14.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1210X20MM_592b11c8-7e31-4c7e-b571-d2b8f0a9d292.jpg?v=1781209231"},{"product_id":"bb-1210x32mm","title":"1210x32mm Taper-Lock® Style Bushing, 32mm Bore, Steel","description":"\u003ch1 style=\"color: #1e2d4d !important; font-size: 28px; font-weight: 700 !important; margin-bottom: 10px;\"\u003e1210x32mm Taper-Lock® Style Bushing, 32mm Bore, Steel\u003c\/h1\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x32mm is a 1210 series Taper-Lock style bushing with a 32mm bore, machined from solid steel with a black oxide finish. It mounts any 1210-bushed component, including sheaves, sprockets, and timing pulleys, to a 32mm shaft. Every bushing is machined from solid stock, never sintered or powdered metal, which matters in a part that transmits its load through a friction fit.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-left: 4px solid #C8102E !important; border-radius: 4px !important; background: #ffffff !important; padding: 16px 20px !important; margin: 0 0 20px 0 !important;\"\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 16px !important; line-height: 1.6 !important; margin: 0 !important;\"\u003e\u003cstrong\u003e$50 minimum order on drive components.\u003c\/strong\u003e Mix and match any pulleys, bushings, sheaves, sprockets, and accessories in your cart to reach the $50 minimum. Questions? Call \u003ca href=\"tel:+18882032358\" style=\"color: #C8102E !important; font-weight: 700 !important; text-decoration: none !important;\"\u003e(888) 203-2358\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eSpecification\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003ePart Number\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210x32mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBushing System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eTaper-Lock® style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eSeries\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eBore\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e32mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eSteel (no sintered or powdered metal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eBlack Oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e0.326 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eApplications\u003c\/h2\u003e\n\n\u003cul style=\"line-height: 1.7; margin: 0 0 16px 0; padding-left: 22px;\"\u003e\n  \u003cli\u003eMounting 1210-bushed V-belt sheaves, sprockets, and timing pulleys to 32mm shafts\u003c\/li\u003e\n  \u003cli\u003eDrive component replacement where the bushing wears or the shaft size changes\u003c\/li\u003e\n  \u003cli\u003eConveyor, fan, pump, and general industrial drive assemblies\u003c\/li\u003e\n  \u003cli\u003eStocking standard bushing sizes for plant maintenance inventories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px; margin-bottom: 12px;\"\u003eCross Reference\u003c\/h2\u003e\n\n\u003cp style=\"line-height: 1.6; margin: 0 0 16px 0;\"\u003eThe 1210x32mm interchanges with these equivalent part numbers, per published manufacturer interchange data:\u003c\/p\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0; font-family: inherit;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color: #1e2d4d; color: #ffffff;\"\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eManufacturer\u003c\/th\u003e\n      \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #1e2d4d;\"\u003eEquivalent Part Number\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eDodge®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210 X 32MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMartin\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210 32MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eGates®\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210 32MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMasterdrive\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210-32MM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eOptibelt\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210-32\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #ffffff;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMcMaster-Carr\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e57095K458\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd; font-weight: 600;\"\u003eMaska\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dddddd;\"\u003e1210X32MM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 14px; color: #555555; line-height: 1.5; margin: 0 0 16px 0;\"\u003eAlways verify dimensions and bore size before substituting part numbers across manufacturers.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid #d9d9d9 !important; border-radius: 10px !important; padding: 32px 24px !important; margin: 24px 0 !important; text-align: center !important; background: #ffffff !important;\"\u003e\n  \u003cp style=\"color: #C8102E !important; font-size: 22px !important; font-weight: 700 !important; margin: 0 0 14px 0 !important;\"\u003eBuying in bulk? Save on volume.\u003c\/p\u003e\n  \u003cp style=\"color: #1e2d4d !important; font-size: 17px !important; line-height: 1.6 !important; margin: 0 0 22px 0 !important;\"\u003eMulti-unit and OEM quantities qualify for volume discounts. Call or email for a quantity quote.\u003c\/p\u003e\n  \u003cdiv\u003e\n    \u003ca href=\"tel:+18882032358\" style=\"display: inline-block !important; background: #C8102E !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n    \u003ca href=\"mailto:sales@texasbelting.com\" style=\"display: inline-block !important; background: #1e2d4d !important; color: #ffffff !important; font-size: 16px !important; font-weight: 700 !important; text-decoration: none !important; padding: 14px 26px !important; border-radius: 6px !important; margin: 6px 8px !important;\"\u003eEmail sales@texasbelting.com\u003c\/a\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #1e2d4d !important; font-size: 24px; font-weight: 600 !important; margin-top: 30px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eWhat does the 1210x32mm bushing fit?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eIt fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 32mm shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x32mm replace the Dodge 1210 X 32MM bushing?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. The 1210 series dimensions are an industry standard, and published interchange data crosses the 1210x32mm directly to the Dodge 1210 X 32MM, as well as Martin 1210 32MM, Gates 1210 32MM, Masterdrive 1210-32MM. Verify bore size before ordering.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eHow does a Taper-Lock style bushing install?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eThe bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\u003c\/p\u003e\n\n\u003ch3 style=\"color: #1e2d4d !important; font-size: 18px; font-weight: 600 !important; margin-top: 20px; margin-bottom: 8px;\"\u003eDoes the 1210x32mm ship from Houston?\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 16px 0; line-height: 1.6;\"\u003eYes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color: #1e2d4d; color: #ffffff; padding: 24px; margin: 30px 0; text-align: center; border-radius: 4px;\"\u003e\n  \u003cp style=\"margin: 0 0 12px 0; font-size: 18px; font-weight: 600; color: #ffffff !important;\"\u003eNeed a quote on 1210x32mm?\u003c\/p\u003e\n  \u003cp style=\"margin: 0 0 16px 0; color: #ffffff !important;\"\u003eHouston warehouse, same-day shipping on stock items.\u003c\/p\u003e\n  \u003ca href=\"tel:8882032358\" style=\"display: inline-block; background-color: #C8102E; color: #ffffff !important; padding: 12px 28px; text-decoration: none; font-weight: 600; border-radius: 4px;\"\u003eCall (888) 203-2358\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 12px; color: #777777; line-height: 1.5; margin-top: 24px;\"\u003eTaper-Lock® is a registered trademark of its respective owner. All third-party part numbers and trademarks referenced, including Dodge®, Gates®, Martin, TB Woods®, Browning®, and others shown in the cross reference table, are the property of their respective owners. References are for compatibility identification only and do not imply affiliation or endorsement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the 1210x32mm bushing fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits any sheave, sprocket, pulley, or coupling machined for a 1210 series Taper-Lock style bushing, and mounts that component to a 32mm shaft. The 1210 size is standardized across manufacturers, so the component brand does not matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x32mm replace the Dodge 1210 X 32MM bushing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 1210 series dimensions are an industry standard, and published interchange data crosses the 1210x32mm directly to the Dodge 1210 X 32MM, as well as Martin 1210 32MM, Gates 1210 32MM, Masterdrive 1210-32MM. Verify bore size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does a Taper-Lock style bushing install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The bushing is split and tapered. Slide it onto the shaft, seat the component over it, and tighten the pull-up screws in the threaded holes. The screws draw the taper into the component, clamping the bushing onto the shaft. To remove, back the screws out and use them in the jacking holes to break the taper free.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the 1210x32mm ship from Houston?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Stock items ship same day from our Houston, Texas warehouse. Call (888) 203-2358 to confirm availability.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"BBMfg","offers":[{"title":"Default Title","offer_id":46927272345789,"sku":"BB-1210x32mm","price":14.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/1210X20MM_8941937c-92cd-4994-84c7-c0c55de17863.jpg?v=1781209230"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/collections\/bb-generic-bushings.jpg?v=1781210123","url":"https:\/\/texasbelting.com\/collections\/bushings.oembed?page=87","provider":"Texas Belting and Supply","version":"1.0","type":"link"}