{"title":"EasyClip and Staplegrip Installation Tools","description":"\u003cp\u003eInstallation tools and accessories for the MATO EasyClip preset staplegrip belt fastener system, including EasyFix hammer driver tools, FP-2000 manual hand punches, staplegrip combs (TP-62, TP-125, TP-187), pin retaining washers, and EasyFix staplegrip belt tape (ESTB-W series).\u003c\/p\u003e\u003cp\u003eFor the EasyClip belt fasteners themselves, see \u003ca href=\"\/collections\/easyclip-fasteners\"\u003eEasyClip preset staple fasteners\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"staplegrip-tool-ft-ps187-6-ft-ps187-6","title":"Staplegrip EasyFix Friction Tape FT-PS187-6 - Galvanized Steel 6\" Length for Size 187 Preset Staplegrip","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip EasyFix Friction Tape FT-PS187-6\u003c\/strong\u003e is a friction tape preset staplegrip strip in 6-inch length, sized for the 187 staplegrip system. Belts 3\/16 to 1\/4 inch thick, rated to 220 PIW. Galvanized Steel construction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 friction-tape preset staplegrip strip\u003c\/strong\u003e, 187 inches long\u003c\/li\u003e\n\u003cli\u003ePre-loaded staples in the strip\u003c\/li\u003e\n\u003cli\u003eFriction tape adhesive backing (preset)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is friction tape preset staplegrip:\u003c\/strong\u003e Friction tape preset staplegrip is a fastener strip that uses pre-loaded staples plus a friction-tape adhesive layer to create a hybrid mechanical-and-adhesive splice. The friction tape provides initial holding while the staples are driven, eliminating the need for a separate alignment jig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to install:\u003c\/strong\u003e Lay the friction tape preset strip across the belt end, press to engage the adhesive, then drive the preset staples with the EasyFix hammer-driver tool. The tape locks the splice during staple driving, preventing the strip from shifting on smooth or worn belt surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Steel provides the standard economical material for general industrial conveyors in dry to moderate environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCross-scored for any belt width:\u003c\/strong\u003e The strip is cross-scored so installers can break it by hand to fit any belt width without cutting tools. This 6-inch length covers most belt widths up to 6 inches.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693286707389,"sku":"FT-PS187-6","price":297.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_e0c2104b-9e47-47cd-ad82-d699d480a312.jpg?v=1778106078"},{"product_id":"staplegrip-tool-ft-ps62-24-ft-ps62-24","title":"Staplegrip EasyFix Friction Tape FT-PS62-24 - Galvanized Steel 24\" Length for Size 62 Preset Staplegrip","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip EasyFix Friction Tape FT-PS62-24\u003c\/strong\u003e is a friction tape preset staplegrip strip in 24-inch length, sized for the 62 staplegrip system. Belts 1\/16 to 1\/8 inch thick, rated to 115 PIW. Galvanized Steel construction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 friction-tape preset staplegrip strip\u003c\/strong\u003e, 62 inches long\u003c\/li\u003e\n\u003cli\u003ePre-loaded staples in the strip\u003c\/li\u003e\n\u003cli\u003eFriction tape adhesive backing (preset)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is friction tape preset staplegrip:\u003c\/strong\u003e Friction tape preset staplegrip is a fastener strip that uses pre-loaded staples plus a friction-tape adhesive layer to create a hybrid mechanical-and-adhesive splice. The friction tape provides initial holding while the staples are driven, eliminating the need for a separate alignment jig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to install:\u003c\/strong\u003e Lay the friction tape preset strip across the belt end, press to engage the adhesive, then drive the preset staples with the EasyFix hammer-driver tool. The tape locks the splice during staple driving, preventing the strip from shifting on smooth or worn belt surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Steel provides the standard economical material for general industrial conveyors in dry to moderate environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCross-scored for any belt width:\u003c\/strong\u003e The strip is cross-scored so installers can break it by hand to fit any belt width without cutting tools. This 24-inch length covers most belt widths up to 24 inches.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693286969533,"sku":"FT-PS62-24","price":1191.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_5d6c188b-ab2f-487b-a5f8-98bead7d2fd9.jpg?v=1778106076"},{"product_id":"staplegrip-tool-ft-ps62-12-ft-ps62-12","title":"Staplegrip EasyFix Friction Tape FT-PS62-12 - Galvanized Steel 12\" Length for Size 62 Preset Staplegrip","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip EasyFix Friction Tape FT-PS62-12\u003c\/strong\u003e is a friction tape preset staplegrip strip in 12-inch length, sized for the 62 staplegrip system. Belts 1\/16 to 1\/8 inch thick, rated to 115 PIW. Galvanized Steel construction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 friction-tape preset staplegrip strip\u003c\/strong\u003e, 62 inches long\u003c\/li\u003e\n\u003cli\u003ePre-loaded staples in the strip\u003c\/li\u003e\n\u003cli\u003eFriction tape adhesive backing (preset)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is friction tape preset staplegrip:\u003c\/strong\u003e Friction tape preset staplegrip is a fastener strip that uses pre-loaded staples plus a friction-tape adhesive layer to create a hybrid mechanical-and-adhesive splice. The friction tape provides initial holding while the staples are driven, eliminating the need for a separate alignment jig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to install:\u003c\/strong\u003e Lay the friction tape preset strip across the belt end, press to engage the adhesive, then drive the preset staples with the EasyFix hammer-driver tool. The tape locks the splice during staple driving, preventing the strip from shifting on smooth or worn belt surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Steel provides the standard economical material for general industrial conveyors in dry to moderate environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCross-scored for any belt width:\u003c\/strong\u003e The strip is cross-scored so installers can break it by hand to fit any belt width without cutting tools. This 12-inch length covers most belt widths up to 12 inches.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693287035069,"sku":"FT-PS62-12","price":595.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_5838f3cf-5fb0-4862-95b9-8e8c2b4fca73.jpg?v=1778106076"},{"product_id":"staplegrip-tool-ft-ps187-12-ft-ps187-12","title":"Staplegrip EasyFix Friction Tape FT-PS187-12 - Galvanized Steel 12\" Length for Size 187 Preset Staplegrip","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip EasyFix Friction Tape FT-PS187-12\u003c\/strong\u003e is a friction tape preset staplegrip strip in 12-inch length, sized for the 187 staplegrip system. Belts 3\/16 to 1\/4 inch thick, rated to 220 PIW. Galvanized Steel construction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 friction-tape preset staplegrip strip\u003c\/strong\u003e, 187 inches long\u003c\/li\u003e\n\u003cli\u003ePre-loaded staples in the strip\u003c\/li\u003e\n\u003cli\u003eFriction tape adhesive backing (preset)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is friction tape preset staplegrip:\u003c\/strong\u003e Friction tape preset staplegrip is a fastener strip that uses pre-loaded staples plus a friction-tape adhesive layer to create a hybrid mechanical-and-adhesive splice. The friction tape provides initial holding while the staples are driven, eliminating the need for a separate alignment jig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to install:\u003c\/strong\u003e Lay the friction tape preset strip across the belt end, press to engage the adhesive, then drive the preset staples with the EasyFix hammer-driver tool. The tape locks the splice during staple driving, preventing the strip from shifting on smooth or worn belt surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Steel provides the standard economical material for general industrial conveyors in dry to moderate environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCross-scored for any belt width:\u003c\/strong\u003e The strip is cross-scored so installers can break it by hand to fit any belt width without cutting tools. This 12-inch length covers most belt widths up to 12 inches.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693287067837,"sku":"FT-PS187-12","price":595.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_b75d3176-9e50-4b02-ba84-81e679f5c207.jpg?v=1778106075"},{"product_id":"staplegrip-tool-tp-62-6-tp-62-6","title":"Staplegrip Comb TP-62-6 - 6-Inch Comb for Size 62 Staplegrip","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip Comb TP-62-6 - 6-Inch Comb for Size 62 Staplegrip\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 Staplegrip Comb TP-62-6\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOperating instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e The TP-62-6 is a 6-inch alignment comb for the size 62 Traditional Staplegrip system. The comb teeth space the staples uniformly across the splice during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen and how to use:\u003c\/strong\u003e Use during Traditional Staplegrip installation: align the comb across the splice, set staples through the comb slots, then remove the comb after staple driving. The 6-inch length covers most field-splice setups.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693287133373,"sku":"TP-62-6","price":99.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-staplegrip-comb_39930175-05ed-47d8-aa26-60a7e56c9317.jpg?v=1778106075"},{"product_id":"staplegrip-tool-tp-187-6-tp-187-6","title":"Staplegrip Comb TP-187-6 - 6-Inch Comb for Size 187 Staplegrip","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip Comb TP-187-6 - 6-Inch Comb for Size 187 Staplegrip\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 Staplegrip Comb TP-187-6\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOperating instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e The TP-187-6 is a 6-inch alignment comb for the size 187 Traditional Staplegrip system. The comb teeth space the staples uniformly across the splice during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen and how to use:\u003c\/strong\u003e Use during Traditional Staplegrip installation for size 187 systems. Different from the smaller size combs in staple-spacing geometry, which matches the size 187 lacing pattern.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693287166141,"sku":"TP-187-6","price":99.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-staplegrip-comb_7380e2e2-856d-45c3-bb6f-c0b150b8d195.jpg?v=1778106005"},{"product_id":"staplegrip-tool-ft-ps125-6-ft-ps125-6","title":"Staplegrip EasyFix Friction Tape FT-PS125-6 - Galvanized Steel 6\" Length for Size 125 Preset Staplegrip","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip EasyFix Friction Tape FT-PS125-6\u003c\/strong\u003e is a friction tape preset staplegrip strip in 6-inch length, sized for the 125 staplegrip system. Belts 1\/8 to 3\/16 inch thick, rated to 180 PIW. Galvanized Steel construction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 friction-tape preset staplegrip strip\u003c\/strong\u003e, 125 inches long\u003c\/li\u003e\n\u003cli\u003ePre-loaded staples in the strip\u003c\/li\u003e\n\u003cli\u003eFriction tape adhesive backing (preset)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is friction tape preset staplegrip:\u003c\/strong\u003e Friction tape preset staplegrip is a fastener strip that uses pre-loaded staples plus a friction-tape adhesive layer to create a hybrid mechanical-and-adhesive splice. The friction tape provides initial holding while the staples are driven, eliminating the need for a separate alignment jig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to install:\u003c\/strong\u003e Lay the friction tape preset strip across the belt end, press to engage the adhesive, then drive the preset staples with the EasyFix hammer-driver tool. The tape locks the splice during staple driving, preventing the strip from shifting on smooth or worn belt surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Steel provides the standard economical material for general industrial conveyors in dry to moderate environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCross-scored for any belt width:\u003c\/strong\u003e The strip is cross-scored so installers can break it by hand to fit any belt width without cutting tools. This 6-inch length covers most belt widths up to 6 inches.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693287198909,"sku":"FT-PS125-6","price":297.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_9f7e5ec8-f11a-47e0-afe2-3399dd03b020.jpg?v=1778106005"},{"product_id":"staplegrip-tool-ft-ps187-24-ft-ps187-24","title":"Staplegrip EasyFix Friction Tape FT-PS187-24 - Galvanized Steel 24\" Length for Size 187 Preset Staplegrip","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip EasyFix Friction Tape FT-PS187-24\u003c\/strong\u003e is a friction tape preset staplegrip strip in 24-inch length, sized for the 187 staplegrip system. Belts 3\/16 to 1\/4 inch thick, rated to 220 PIW. Galvanized Steel construction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 friction-tape preset staplegrip strip\u003c\/strong\u003e, 187 inches long\u003c\/li\u003e\n\u003cli\u003ePre-loaded staples in the strip\u003c\/li\u003e\n\u003cli\u003eFriction tape adhesive backing (preset)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is friction tape preset staplegrip:\u003c\/strong\u003e Friction tape preset staplegrip is a fastener strip that uses pre-loaded staples plus a friction-tape adhesive layer to create a hybrid mechanical-and-adhesive splice. The friction tape provides initial holding while the staples are driven, eliminating the need for a separate alignment jig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to install:\u003c\/strong\u003e Lay the friction tape preset strip across the belt end, press to engage the adhesive, then drive the preset staples with the EasyFix hammer-driver tool. The tape locks the splice during staple driving, preventing the strip from shifting on smooth or worn belt surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Steel provides the standard economical material for general industrial conveyors in dry to moderate environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCross-scored for any belt width:\u003c\/strong\u003e The strip is cross-scored so installers can break it by hand to fit any belt width without cutting tools. This 24-inch length covers most belt widths up to 24 inches.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693287231677,"sku":"FT-PS187-24","price":1191.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_bae8b45f-fe84-464c-8920-06ca7cee515c.jpg?v=1778106005"},{"product_id":"staplegrip-tool-ft-ps62-6-ft-ps62-6","title":"Staplegrip EasyFix Friction Tape FT-PS62-6 - Galvanized Steel 6\" Length for Size 62 Preset Staplegrip","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip EasyFix Friction Tape FT-PS62-6\u003c\/strong\u003e is a friction tape preset staplegrip strip in 6-inch length, sized for the 62 staplegrip system. Belts 1\/16 to 1\/8 inch thick, rated to 115 PIW. Galvanized Steel construction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 friction-tape preset staplegrip strip\u003c\/strong\u003e, 62 inches long\u003c\/li\u003e\n\u003cli\u003ePre-loaded staples in the strip\u003c\/li\u003e\n\u003cli\u003eFriction tape adhesive backing (preset)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is friction tape preset staplegrip:\u003c\/strong\u003e Friction tape preset staplegrip is a fastener strip that uses pre-loaded staples plus a friction-tape adhesive layer to create a hybrid mechanical-and-adhesive splice. The friction tape provides initial holding while the staples are driven, eliminating the need for a separate alignment jig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to install:\u003c\/strong\u003e Lay the friction tape preset strip across the belt end, press to engage the adhesive, then drive the preset staples with the EasyFix hammer-driver tool. The tape locks the splice during staple driving, preventing the strip from shifting on smooth or worn belt surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Steel provides the standard economical material for general industrial conveyors in dry to moderate environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCross-scored for any belt width:\u003c\/strong\u003e The strip is cross-scored so installers can break it by hand to fit any belt width without cutting tools. This 6-inch length covers most belt widths up to 6 inches.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693287264445,"sku":"FT-PS62-6","price":297.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_26706021-6944-4e28-9cc8-c0ee318bc220.jpg?v=1778106005"},{"product_id":"staplegrip-tool-ft-ps125-12-ft-ps125-12","title":"Staplegrip EasyFix Friction Tape FT-PS125-12 - Galvanized Steel 12\" Length for Size 125 Preset Staplegrip","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip EasyFix Friction Tape FT-PS125-12\u003c\/strong\u003e is a friction tape preset staplegrip strip in 12-inch length, sized for the 125 staplegrip system. Belts 1\/8 to 3\/16 inch thick, rated to 180 PIW. Galvanized Steel construction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 friction-tape preset staplegrip strip\u003c\/strong\u003e, 125 inches long\u003c\/li\u003e\n\u003cli\u003ePre-loaded staples in the strip\u003c\/li\u003e\n\u003cli\u003eFriction tape adhesive backing (preset)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is friction tape preset staplegrip:\u003c\/strong\u003e Friction tape preset staplegrip is a fastener strip that uses pre-loaded staples plus a friction-tape adhesive layer to create a hybrid mechanical-and-adhesive splice. The friction tape provides initial holding while the staples are driven, eliminating the need for a separate alignment jig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to install:\u003c\/strong\u003e Lay the friction tape preset strip across the belt end, press to engage the adhesive, then drive the preset staples with the EasyFix hammer-driver tool. The tape locks the splice during staple driving, preventing the strip from shifting on smooth or worn belt surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Steel provides the standard economical material for general industrial conveyors in dry to moderate environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCross-scored for any belt width:\u003c\/strong\u003e The strip is cross-scored so installers can break it by hand to fit any belt width without cutting tools. This 12-inch length covers most belt widths up to 12 inches.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693287297213,"sku":"FT-PS125-12","price":595.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_a9844e72-796b-47bf-a51d-3d46e763a710.jpg?v=1778106005"},{"product_id":"staplegrip-tool-fp-2000-fp-2000","title":"Staplegrip Punch FP-2000","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip Punch FP-2000\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 Staplegrip Punch FP-2000\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOperating instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e The FP-2000 is a manual hand punch for installing Traditional Staplegrip lacing. Drives the loose staples through the lacing strip and belt fabric without requiring a separate hammer impact for each staple.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen and how to use:\u003c\/strong\u003e For Preset Staplegrip (where staples are pre-loaded into the strip), use the EasyFix tool instead. The FP-2000 is specifically for Traditional Staplegrip systems where staples are loaded one at a time.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693287329981,"sku":"FP-2000","price":77.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-staplegrip-punch_f45a5a1d-82c6-4774-bd3a-b0260e65c92e.jpg?v=1778106011"},{"product_id":"staplegrip-tool-125s","title":"Staplegrip Stainless Steel Staples 125S - 990 Staples per Box for Size 125 Belt Fastener","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip Stainless Steel Staples 125S\u003c\/strong\u003e is a box of 990 stainless steel staples for installing Traditional Staplegrip lacing strips on belts 1\/8 to 3\/16 inch thick. For the 125-size Staplegrip system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 Staplegrip Stainless Steel Staples 125S\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOperating instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat these are:\u003c\/strong\u003e Staples for hammer-driving Traditional Staplegrip lacing strips. Different from Preset Staplegrip (which has staples pre-loaded into the fastener strip), Traditional Staplegrip requires loose staples driven through the strip and belt at installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy stainless steel:\u003c\/strong\u003e Stainless staples resist corrosion in wash-down, food, and chemical environments. The staple stays sharp through extended belt operation and resists rust that would weaken the splice over time. Used with stainless or galvanized 125 Traditional Staplegrip strips.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow they install:\u003c\/strong\u003e Each staple is pre-positioned in the Traditional Staplegrip lacing slots, then driven 90 degrees to the belt pull direction with the EasyFix hammer driver tool. The 90-degree clinch direction makes it virtually impossible for the staple to open under load.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePack:\u003c\/strong\u003e 990 staples per box. One box typically supports 5 to 10 splices depending on belt width.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693287395517,"sku":"125S","price":152.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-staplegrip-staple-gun_2057bf6a-3349-4f9c-857a-cebcd42c5a21.jpg?v=1778106005"},{"product_id":"staplegrip-tool-tp-125-6-tp-125-6","title":"Staplegrip Comb TP-125-6 - 6-Inch Comb for Size 125 Staplegrip","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip Comb TP-125-6 - 6-Inch Comb for Size 125 Staplegrip\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 Staplegrip Comb TP-125-6\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOperating instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e The TP-125-6 is a 6-inch alignment comb for the size 125 Traditional Staplegrip system. The comb teeth space the staples uniformly across the splice during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen and how to use:\u003c\/strong\u003e Use during Traditional Staplegrip installation. Different from the TP-62-6 only in staple-spacing geometry, which matches the larger size 125 staples and lacing.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693287428285,"sku":"TP-125-6","price":99.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-staplegrip-comb_e4252965-2081-4c79-a593-d9b6fcaea501.jpg?v=1778106005"},{"product_id":"staplegrip-tool-ft-ps125-24-ft-ps125-24","title":"Staplegrip EasyFix Friction Tape FT-PS125-24 - Galvanized Steel 24\" Length for Size 125 Preset Staplegrip","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip EasyFix Friction Tape FT-PS125-24\u003c\/strong\u003e is a friction tape preset staplegrip strip in 24-inch length, sized for the 125 staplegrip system. Belts 1\/8 to 3\/16 inch thick, rated to 180 PIW. Galvanized Steel construction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 friction-tape preset staplegrip strip\u003c\/strong\u003e, 125 inches long\u003c\/li\u003e\n\u003cli\u003ePre-loaded staples in the strip\u003c\/li\u003e\n\u003cli\u003eFriction tape adhesive backing (preset)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is friction tape preset staplegrip:\u003c\/strong\u003e Friction tape preset staplegrip is a fastener strip that uses pre-loaded staples plus a friction-tape adhesive layer to create a hybrid mechanical-and-adhesive splice. The friction tape provides initial holding while the staples are driven, eliminating the need for a separate alignment jig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to install:\u003c\/strong\u003e Lay the friction tape preset strip across the belt end, press to engage the adhesive, then drive the preset staples with the EasyFix hammer-driver tool. The tape locks the splice during staple driving, preventing the strip from shifting on smooth or worn belt surfaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Steel provides the standard economical material for general industrial conveyors in dry to moderate environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCross-scored for any belt width:\u003c\/strong\u003e The strip is cross-scored so installers can break it by hand to fit any belt width without cutting tools. This 24-inch length covers most belt widths up to 24 inches.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693287461053,"sku":"FT-PS125-24","price":1191.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_15a179db-75a0-478b-912d-dc2beba6e6c3.jpg?v=1778106005"},{"product_id":"staplegrip-tool-62s","title":"Staplegrip Stainless Steel Staples 62S - 990 Staples per Box for Size 62 Belt Fastener","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip Stainless Steel Staples 62S\u003c\/strong\u003e is a box of 990 stainless steel staples for installing Traditional Staplegrip lacing strips on belts 1\/16 to 1\/8 inch thick. For the 62-size Staplegrip system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 Staplegrip Stainless Steel Staples 62S\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOperating instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat these are:\u003c\/strong\u003e Staples for hammer-driving Traditional Staplegrip lacing strips. Different from Preset Staplegrip (which has staples pre-loaded into the fastener strip), Traditional Staplegrip requires loose staples driven through the strip and belt at installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy stainless steel:\u003c\/strong\u003e Stainless staples resist corrosion in wash-down, food, and chemical environments. The staple stays sharp through extended belt operation and resists rust that would weaken the splice over time. Used with stainless or galvanized 62 Traditional Staplegrip strips.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow they install:\u003c\/strong\u003e Each staple is pre-positioned in the Traditional Staplegrip lacing slots, then driven 90 degrees to the belt pull direction with the EasyFix hammer driver tool. The 90-degree clinch direction makes it virtually impossible for the staple to open under load.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePack:\u003c\/strong\u003e 990 staples per box. One box typically supports 5 to 10 splices depending on belt width.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693287526589,"sku":"62S","price":152.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-staplegrip-staple-gun_fc430542-bd0e-4757-a5d3-b9c1c01c9e25.jpg?v=1778106021"},{"product_id":"staplegrip-tool-187s","title":"Staplegrip Stainless Steel Staples 187S - 990 Staples per Box for Size 187 Belt Fastener","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip Stainless Steel Staples 187S\u003c\/strong\u003e is a box of 990 stainless steel staples for installing Traditional Staplegrip lacing strips on belts 3\/16 to 1\/4 inch thick. For the 187-size Staplegrip system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 Staplegrip Stainless Steel Staples 187S\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOperating instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat these are:\u003c\/strong\u003e Staples for hammer-driving Traditional Staplegrip lacing strips. Different from Preset Staplegrip (which has staples pre-loaded into the fastener strip), Traditional Staplegrip requires loose staples driven through the strip and belt at installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy stainless steel:\u003c\/strong\u003e Stainless staples resist corrosion in wash-down, food, and chemical environments. The staple stays sharp through extended belt operation and resists rust that would weaken the splice over time. Used with stainless or galvanized 187 Traditional Staplegrip strips.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow they install:\u003c\/strong\u003e Each staple is pre-positioned in the Traditional Staplegrip lacing slots, then driven 90 degrees to the belt pull direction with the EasyFix hammer driver tool. The 90-degree clinch direction makes it virtually impossible for the staple to open under load.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePack:\u003c\/strong\u003e 990 staples per box. One box typically supports 5 to 10 splices depending on belt width.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693287592125,"sku":"187S","price":152.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-staplegrip-staple-gun_7f30088e-bf1b-4fa4-b441-6331649fd9c7.jpg?v=1778106005"},{"product_id":"staplegrip-tool-62rw","title":"Staplegrip Pin Retaining Washer 62RW - 50 per Pack for Size 62","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip Pin Retaining Washer 62RW\u003c\/strong\u003e is a pack of 50 retaining washers sized for size 62 Staplegrip belt fasteners. The washer prevents hinge pin migration during operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 Staplegrip Pin Retaining Washer 62RW\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOperating instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Staplegrip splices use a hinge pin threaded through the fastener loops to complete the splice. Belt tension and conveyor misalignment can cause the pin to migrate sideways outside the fastener loops. The retaining washer swages onto the end of the pin, blocking migration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to install:\u003c\/strong\u003e After threading the hinge pin through the fastener loops, place a retaining washer over each end of the pin. Compress the washer onto the pin with pliers or a swaging tool. The washer locks the pin in position permanently.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to use:\u003c\/strong\u003e Recommended for any Staplegrip installation where splice longevity matters. Especially valuable in: belts with extreme alignment changes, belts running close to pulley edges, conveyors with frequent reversing direction, and long-haul belts where pin migration would not be noticed promptly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePack:\u003c\/strong\u003e 50 washers per pack. Each splice uses 2 washers (one per pin end), so one pack supports 25 splices.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693287887037,"sku":"62RW","price":27.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-plategrip-top-plates_fd384cc0-29c6-4c55-adbd-4482457dd183.jpg?v=1778106005"},{"product_id":"staplegrip-tool-187rw","title":"Staplegrip Pin Retaining Washer 187RW - 50 per Pack for Size 187","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip Pin Retaining Washer 187RW\u003c\/strong\u003e is a pack of 50 retaining washers sized for size 187 Staplegrip belt fasteners. The washer prevents hinge pin migration during operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 Staplegrip Pin Retaining Washer 187RW\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOperating instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Staplegrip splices use a hinge pin threaded through the fastener loops to complete the splice. Belt tension and conveyor misalignment can cause the pin to migrate sideways outside the fastener loops. The retaining washer swages onto the end of the pin, blocking migration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to install:\u003c\/strong\u003e After threading the hinge pin through the fastener loops, place a retaining washer over each end of the pin. Compress the washer onto the pin with pliers or a swaging tool. The washer locks the pin in position permanently.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to use:\u003c\/strong\u003e Recommended for any Staplegrip installation where splice longevity matters. Especially valuable in: belts with extreme alignment changes, belts running close to pulley edges, conveyors with frequent reversing direction, and long-haul belts where pin migration would not be noticed promptly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePack:\u003c\/strong\u003e 50 washers per pack. Each splice uses 2 washers (one per pin end), so one pack supports 25 splices.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693288116413,"sku":"187RW","price":27.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-plategrip-top-plates_1a02d962-b801-4cfc-a282-e5fb90ec7671.jpg?v=1778106005"},{"product_id":"staplegrip-tool-sms125-stainless-steel","title":"Staplegrip Stainless Marker Strip SMS125 for Size 125","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip Stainless Marker Strip SMS125 for Size 125\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 Staplegrip Stainless Marker Strip SMS125 for Size 125\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOperating instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e The SMS125 is a stainless steel marker strip for the size 125 Staplegrip system. Provides a permanent stainless reference mark on the belt indicating splice location, maintenance date, or belt identification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen and how to use:\u003c\/strong\u003e Use for belts in inventory tracking systems or in installations where permanent splice marking aids future maintenance. Stainless construction resists corrosion in wash-down and chemical environments.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693288345789,"sku":"SMS125","price":184.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-mrnat-tool-kit_a1ec2d7a-3c8b-4f53-bdbe-c2bb1bc0c3fd.jpg?v=1778105945"},{"product_id":"staplegrip-tool-15019-15019-221619","title":"Staplegrip Replacement Part 15019 - Specialty Component","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip Replacement Part 15019\u003c\/strong\u003e is a specialty replacement part for MATO Staplegrip and EasyClip Staplegrip systems. Available through Texas Belting as the authorized MATO distributor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 Staplegrip Replacement Part 15019\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOperating instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhen to order:\u003c\/strong\u003e Reference this part number when MATO documentation or your Staplegrip service manual specifies it. For installation tools or fastener sizing, the EST-KIT or FP-2000 punch may be more appropriate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed help with sizing or compatibility?\u003c\/strong\u003e Call Texas Belting at 888-203-2358 with your application details and we can verify whether 15019 is the correct part for your need.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693288444093,"sku":"15019","price":36.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-staplegrip-lacing-tool_185908b9-fe97-4cae-a5ce-f71bf9733f96.jpg?v=1778105946"},{"product_id":"staplegrip-tool-125rw","title":"Staplegrip Pin Retaining Washer 125RW - 50 per Pack for Size 125","description":"\u003cp\u003e\u003cstrong\u003eStaplegrip Pin Retaining Washer 125RW\u003c\/strong\u003e is a pack of 50 retaining washers sized for size 125 Staplegrip belt fasteners. The washer prevents hinge pin migration during operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 Staplegrip Pin Retaining Washer 125RW\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOperating instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e Staplegrip splices use a hinge pin threaded through the fastener loops to complete the splice. Belt tension and conveyor misalignment can cause the pin to migrate sideways outside the fastener loops. The retaining washer swages onto the end of the pin, blocking migration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to install:\u003c\/strong\u003e After threading the hinge pin through the fastener loops, place a retaining washer over each end of the pin. Compress the washer onto the pin with pliers or a swaging tool. The washer locks the pin in position permanently.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to use:\u003c\/strong\u003e Recommended for any Staplegrip installation where splice longevity matters. Especially valuable in: belts with extreme alignment changes, belts running close to pulley edges, conveyors with frequent reversing direction, and long-haul belts where pin migration would not be noticed promptly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePack:\u003c\/strong\u003e 50 washers per pack. Each splice uses 2 washers (one per pin end), so one pack supports 25 splices.\u003c\/p\u003e\u003cp\u003eTexas Belting is an authorized MATO distributor shipping from Houston, TX. Same-day shipping on stocked items. Call 888-203-2358 for sizing help or bulk pricing.\u003c\/p\u003e","brand":"MATO","offers":[{"title":"Default Title","offer_id":46693288476861,"sku":"125RW","price":27.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/7721\/files\/cai-plategrip-top-plates_1c8a8a74-d2a6-483e-b8b9-5ac9339391e7.jpg?v=1778105946"}],"url":"https:\/\/texasbelting.com\/collections\/easyclip-tools.oembed","provider":"Texas Belting and Supply","version":"1.0","type":"link"}