Menu
Cart

4 Ply Gum Rough Top x Bare

4 Ply Gum Rough Top x Bare

4 Ply Gum Rough Top x Bare

Color: Tan
Nominal OAG: 0.350" +/- .020
Recessed OAG: 0.175" +/- N/A
Plies: 4
Fabric: Polyester
Minimum Pulley Diameter: 4"
Top Surface: Hemp Impression Rough Top
Bottom Surface: Bare
Compound: Natural Rubber
Natural Rubber or Polyisoprene exhibits abrasion, gouge and cut resistance. It is generally used in nonmarking belts.
Work Tension: 200 lbs. PIW
Elongation: Less than 2%
Weight P.I.W. / Ft.: .130 lbs.
Working Temperature: -40F to 250F
Joining Method: Lap Splice; Lacing. (Clipper, Unibar, Bolt Hinged, Rivet Hinged, Bolt Solid Plate)

Features: 3-1407 offers one of the highest co-efficient of friction for steep inclines. This belt cushions the conveyed product with a non-marking surface. NOTE--The rough top impression must be recessed to use lacing. Use Recessed OAG for Lacing Recommendation.

Applications: 4 Ply Tan Rough Top X Bare is popular where a little extra grip or non-marking quality is needed in an incline belt.