About Bando Chemical Industries
A Bando belt cross-reference matches Bando part numbers to equivalent belts from Gates, Dayco, Continental, and other manufacturers. Because Bando uses industry-standard numbering (PK for serpentine, A/B/C/D for V-belts, standard pitch for timing belts), cross-referencing is straightforward , if the part number matches, the belt fits.
Bando Chemical Industries, Ltd. is one of the world's largest manufacturers of power transmission belts, headquartered in Kobe, Japan. Founded in 1906, Bando has over a century of engineering experience and supplies OEM belts to Toyota, Honda, Subaru, Nissan, and other major manufacturers. Their North American operations are based in Bowling Green, Kentucky, where they produce belts for both the automotive aftermarket and industrial distribution.
Texas Belting and Supply is an authorized Bando distributor with over 1,700 Bando belt SKUs in stock at our Houston warehouse. We carry their full automotive serpentine line, industrial V-belts, and synchronous timing belts.
Bando Serpentine Belt Cross-Reference
Bando serpentine belts (also called micro-V or poly-V belts) use the industry-standard PK numbering system. The part number is the same across manufacturers, making cross-referencing straightforward. A Bando 7PK1310 is a direct replacement for a Gates K071310, Dayco 5070515, or Continental 7PK1310.
Bando to Gates Serpentine Belt Cross-Reference
Gates uses the "K" prefix format. To convert a Bando PK number to Gates: take the rib count, add "K0", then the length in mm minus the "PK" portion. Gates also uses their own alternate numbering on some belts.
Bando to Gates Serpentine Belt Cross-Reference
Bando Part #
Gates Part #
Ribs
Length (mm)
Length (in)
Common Application
5PK730
K050290
5
730
28.7"
A/C compressor, small engines
6PK2085
K060820
6
2085
82.1"
Ford, GM trucks, main drive
7PK1310
K070515
7
1310
51.6"
Honda Accord, Civic, CR-V
7PK1535
K070605
7
1535
60.4"
Toyota Camry, RAV4
7PK1960
K070770
7
1960
77.2"
Subaru Outback, Legacy
8PK1320
K080520
8
1320
52.0"
Industrial HVAC, compressor drives
10PK1335
K100525
10
1335
52.6"
Heavy-duty industrial, diesel engines
12PK2160
K120850
12
2160
85.0"
Heavy truck, industrial generator
Cross-reference rule: If the PK number matches, the belt fits. Bando 7PK1310 = Gates 7PK1310 = Continental 7PK1310 = Dayco 7PK1310. The dimensional specifications are identical across brands. The differences are in rubber compound and construction quality, not dimensions.
Bando to Dayco Serpentine Belt Cross-Reference
Dayco uses their own proprietary numbering alongside the standard PK format. Many Dayco catalogs list the PK number as the primary identifier, making cross-referencing simple.
Bando to Dayco Serpentine Belt Cross-Reference
Bando PK #
Dayco Poly Rib #
Dayco Fleet #
Ribs x Length
6PK1850
6PK1850
5060730
6 x 1850mm (72.8")
7PK1275
7PK1275
5070502
7 x 1275mm (50.2")
7PK1345
7PK1345
5070530
7 x 1345mm (53.0")
8PK1975
8PK1975
5080775
8 x 1975mm (77.8")
10PK1360
10PK1360
5100535
10 x 1360mm (53.5")
Bando V-Belt Cross-Reference
Bando industrial V-belts use the same standard part numbers as Gates, Browning, and other manufacturers. Classical Bando V-belts follow the A/B/C/D section numbering, and narrow wedge belts use the 3V/5V system. A Bando A48 is a direct replacement for any manufacturer's A48.
Bando V-Belt Cross-Reference by Type
Belt Type
Bando Series
Cross-References To
Sections Available
Classical V-Belt
Bando Power King
Gates Hi-Power, Browning Gripnotch, Dayco AP
A, B, C, D
Cogged V-Belt
Bando Power King Cog
Gates Tri-Power, Browning CX, Dayco Top Cog
AX, BX, CX
Narrow Wedge
Bando Power Ace
Gates Super HC, Browning 3VX/5VX
3V, 3VX, 5V, 5VX
Light Duty / FHP
Bando FHP
Gates Truflex, Dayco L-Section
3L, 4L, 5L
Kevlar V-Belt
Bando Aramid Cord
Gates Kevlar, Dayco Aramid
A, B, 4L, 5L (select sizes)
Gates Truflex to Bando Cross-Reference
Gates Truflex belts are a popular FHP (fractional horsepower) line. Bando produces direct equivalents using the standard L-section numbering. Many customers searching for Gates Truflex replacements can use the corresponding Bando FHP belt.
Gates Truflex to Bando Equivalent Cross-Reference
Gates Truflex #
Bando Equivalent
Section
Outside Length
Gates Truflex 4LXP700 (G 4LXP700)
Bando 4L700
4L (cogged)
70.0"
Gates Truflex 4LXP880 (G 4LXP880)
Bando 4L880
4L (cogged)
88.0"
Gates Truflex 4LXA720
Bando AX720 or 4L720
AX / 4L
72.0"
Gates Truflex 4LXP880-885
Bando 4L880 or 4L885
4L (cogged)
88.0" – 88.5"
Gates Truflex "G" prefix: Gates Truflex belts with a "G" prefix (e.g., G 4LXP880) indicate a "green stripe" belt with their Truflex compound. The dimensions are standard , cross-reference by the L-section number and length. LXP = cogged construction, LXA = cogged with aramid (Kevlar) cord.
Bando Timing Belt Cross-Reference
Bando synchronous timing belts use industry-standard pitch designations. The part numbers are interchangeable across Bando, Gates, Continental, and other manufacturers when the pitch profile matches.
Profile
Bando Series
Equivalent Gates Series
Pitch Sizes
HTD (curvilinear)
Bando Synchro-Link HTD
Gates PowerGrip HTD
3M, 5M, 8M, 14M
Trapezoidal (imperial)
Bando Synchro-Link
Gates PowerGrip
MXL, XL, L, H, XH, XXH
RPP (high performance)
Bando RPP Plus
Gates PowerGrip GT3/GT4
5M, 8M, 14M
Common Bando Timing Belt Part Numbers
Common Bando Timing Belt Part Numbers and Gates Equivalents
Bando Part #
Profile
Pitch Length
Width
Gates Equivalent
425H100
H (imperial)
42.5"
1.00"
Gates 425H100
880-8MGT-30
8M (HTD/GT)
880mm
30mm
Gates 880-8MGT-30
800-8M-20
8M (HTD)
800mm
20mm
Gates 800-8M-20
640-8MGT-20
8M (GT)
640mm
20mm
Gates 640-8MGT-20
130XL037
XL (imperial)
13.0"
3/8"
Gates 130XL037
Timing belt numbering: For imperial trapezoidal belts (H, XH, etc.), the first number is the pitch length in tenths of an inch and the last number is width in hundredths of an inch. For metric HTD belts, the first number is pitch circumference in mm, the middle is pitch in mm, and the last is width in mm. These numbers are standardized , if the number matches, the belt fits.
How to Read a Bando Serpentine Belt Part Number: 7PK1310 Decoded
Visual breakdown of the Bando serpentine belt part number 7PK1310 showing three color-coded segments: 7 (rib count in red), PK (profile type in navy), and 1310 (effective length in millimeters in red).
Bando Part Number Decoder
7
PK
1310
Rib Count
7 ribs
Profile
Poly-K standard
Length (mm)
1310mm = 51.6 inches
Same number = Same belt
Bando 7PK1310
= Gates 7PK1310
= Dayco 7PK1310
PK numbers are industry-standardized , dimensional specs are identical across all manufacturers
How to Read Bando Belt Part Numbers
Bando uses industry-standard numbering across all their belt lines. Here's how to decode any Bando part number.
Serpentine / Micro-V (PK)
Example: 7PK1310
7 = number of ribs
PK = poly-K rib profile
1310 = effective length in mm
To get inches: 1310 ÷ 25.4 = 51.6"
Classical V-Belt
Example: B68
B = cross-section (5/8" top width)
68 = inside length in inches
Add 3 for outside length: 71"
BX68 = cogged version of same belt
Narrow Wedge V-Belt
Example: 5V1000
5V = cross-section (5/8" narrow wedge)
1000 = outside length × 10
Actual length: 1000 ÷ 10 = 100.0"
5VX1000 = cogged version
Timing Belt
Example: 880-8M-30
880 = pitch circumference in mm
8M = 8mm pitch (HTD profile)
30 = belt width in mm
MGT suffix = Gates GT-compatible tooth
Bando Belt Catalog by Series
Texas Belting stocks the following Bando belt product lines. Click any series to browse available sizes and order online.
Bando Automotive Serpentine Belts
Bando's EPDM serpentine belts are engineered for long life in under-hood temperatures up to 250°F. They are an OEM supplier to Japanese automakers and produce the same quality belts for the aftermarket. Available in 4PK through 16PK configurations.
Series
Rib Count
Common Lengths (mm)
Applications
4PK – 5PK
4 – 5 ribs
611 – 2000
A/C compressor, power steering, water pump (single accessory)
6PK
6 ribs
760 – 2255
Main serpentine drive on 4-cylinder engines
7PK
7 ribs
910 – 2275
Main serpentine drive on V6 and V8 engines
8PK – 10PK
8 – 10 ribs
955 – 2250
Diesel engines, heavy-duty trucks, industrial compressors
12PK – 16PK
12 – 16 ribs
1230 – 2360
Heavy truck, industrial generators, high-torque applications
Bando Industrial V-Belts
Bando's Power King line covers the full range of classical and cogged V-belts for industrial applications. Their aramid (Kevlar) cord options provide extra strength for high-load drives.
Bando Timing Belts
Bando's Synchro-Link timing belts are available in all standard synchronous profiles , HTD curvilinear (3M, 5M, 8M, 14M), imperial trapezoidal (MXL through XXH), and their high-performance RPP Plus line. Available in neoprene and HNBR compounds with fiberglass or Kevlar tensile cords.
Why Choose Bando Belts
OEM Quality
Bando is a direct OEM supplier to Toyota, Honda, Subaru, and Nissan. The same engineering and quality standards that go into factory-installed belts are applied to their aftermarket and industrial lines.
EPDM Rubber Compound
Bando automotive serpentine belts use EPDM rubber that resists cracking, heat aging, and ozone degradation. EPDM belts maintain flexibility and grip over a wider temperature range than older neoprene compounds.
Precision Manufacturing
ISO 9001 certified manufacturing with tight dimensional tolerances. Bando belts consistently meet or exceed RMA specifications for tensile strength, elongation, and flex life.
Value
Bando belts deliver OEM-grade performance at a competitive price point. For fleet operators and maintenance teams ordering in volume, Bando provides an excellent cost-per-mile or cost-per-hour value compared to other premium brands.
Frequently Asked Questions
Where can I find a Bando belt cross-reference chart?
Bando part numbers follow industry-standard naming conventions, so cross-referencing is straightforward. Bando serpentine belts use the PK metric system (e.g., 7PK1310), Bando V-belts use standard A/B/C/D section numbers (e.g., A48, B68), and Bando timing belts use standard pitch designations (e.g., 425H, 800-8M). A Bando 7PK1310 is interchangeable with any quality 7PK1310 from Gates, Continental, Dayco, or other manufacturers. Texas Belting stocks over 1,700 Bando belt SKUs with same-day shipping from Houston.
Are Bando belts good quality?
Yes. Bando Chemical Industries is one of the world's largest belt manufacturers, founded in Kobe, Japan in 1906. They are an OEM supplier to major automotive manufacturers including Toyota, Honda, Subaru, and Nissan. Bando belts are manufactured to ISO 9001 standards and consistently meet or exceed RMA (Rubber Manufacturers Association) specifications. Their EPDM serpentine belts and Kevlar-reinforced V-belts are known for long service life and heat resistance.
How do I read a Bando serpentine belt part number?
Bando serpentine belt numbers follow the PK metric format. The first number is the rib count, "PK" stands for Poly-K (the rib profile standard), and the last number is the belt length in millimeters. For example, 7PK1310 means 7 ribs, PK profile, 1310mm effective length. To convert to inches, divide by 25.4 , so 1310mm is approximately 51.6 inches.
Can I replace a Gates or Dayco serpentine belt with a Bando?
Yes, as long as the part number matches. Serpentine belt numbers are industry-standardized , a 7PK1310 is the same physical size regardless of manufacturer. Bando, Gates, Dayco, and Continental all produce belts to the same dimensional specifications. The differences are in rubber compound, cord material, and construction quality, but the belts are dimensionally interchangeable.
What types of belts does Bando make?
Bando manufactures automotive serpentine/micro-V belts (PK series), classical V-belts (A, B, C, D sections), narrow wedge V-belts (3V, 5V), synchronous timing belts (HTD, trapezoidal, and RPP profiles), and specialty industrial belts. Their automotive serpentine line and industrial V-belt lines are the most widely distributed in the North American market.
Does Bando make timing belts?
Yes. Bando produces a full range of synchronous timing belts including HTD curvilinear profiles (3M, 5M, 8M, 14M pitch), imperial trapezoidal profiles (MXL, XL, L, H, XH, XXH), and their RPP (Rubber Positive Plus) high-performance line. Bando timing belts are available in neoprene and HNBR rubber compounds, with fiberglass or Kevlar tensile cords.
Shop Bando Belts
All Bando Belts (1,700+ SKUs) →
Automotive Serpentine Belts →
Bando Timing Belts →
Industrial V-Belts →
Classical V-Belts →
Cogged V-Belts →
HTD Timing Belts →
All Timing Belts →
V-Belt Size Chart →
How to Measure a Belt →
Need Help Finding a Bando Belt?
Give us the old part number from any manufacturer , we'll cross-reference it and get you the right Bando belt, fast.
Request a Quote
Call (888) 203-2358