WearSlide Non-Woven 1.5 CFM Abrasion Resistant

WearSlide Non-Woven 1.5 CFM Abrasion Resistant

WearSlide Non-Woven 1.5 CFM Abrasion Resistant — Specialty Conveyor Belts › Air Permeable Fabric Belts

Technical Overview

Specifically designed for air gravity conveyors, this abrasion-resistant WearSlide material fluidizes dry bulk powders such as cement, barite, silica and alumina. It offers several advantages over woven air-permeable fabrics, including no need for stretching prior to installation and no risk of unraveling when cut or punched. WearSlide combines the best features of non-woven polyester with the durability of rubber for enhanced performance and longevity.

WearSlide Non-Woven 1.5 CFM Abrasion Resistant - Belt Construction Image

Selection Notes

  • Cover compound: White Nitrile.
  • 1-ply carcass construction.
  • Carcass type: Needled Polyester.
  • Operating temperature range: -60 °F to 310 °F.
  • Belt weight: 0.0550 lbs/PIW per inch of width.
  • Belt thickness: (6.35 mm) 1/4 in..
  • Tension rating: 60 PIW.

Frequently Asked Questions

What information do I need to request a quote?▼

To request a quote, provide: required belt width, overall belt length, belt end or splice type, quantity needed, and any application details such as operating temperature, materials conveyed, incline angle, and moisture or chemical exposure.

What is the lead time for custom belts?▼

Lead times vary based on specifications and current production schedules. Contact Texas Belting & Supply at 888-203-2358 for current availability and lead time estimates.

What splice and lacing options are available for this belt?▼

This belt is compatible with mechanical lacing and vulcanized splicing where applicable. Specify your required belt end type when submitting a quote request.

What is the operating temperature range for Part #34228?▼

The WearSlide Non-Woven 1.5 CFM Abrasion Resistant (Part #34228) has an operating temperature range of -60 °F to 310 °F. Operating outside this range may reduce belt life or performance. Contact Texas Belting at 888-203-2358 for high-temperature or cold-environment applications.

What is the minimum pulley diameter for Part #34228?▼

The minimum recommended pulley diameter for the WearSlide Non-Woven 1.5 CFM Abrasion Resistant is 0.00". This belt has an overall thickness of (6.35 mm) 1/4 in.. Using a pulley smaller than the minimum may cause premature belt failure or tracking issues.

Can I order Part #34228 in a custom width and length?▼

Yes. The WearSlide Non-Woven 1.5 CFM Abrasion Resistant is available custom cut to any required width and fabricated to your specified overall length. Texas Belting has no minimum order requirements. Belt end options include mechanical lacing, finger splice, and endless vulcanized splice. Request a quote with your exact dimensions.

Technical Specifications

Specification Value
Catalog # 16h
Part # 34228
Top Cover Compound White Nitrile
Color White
Top Cover Thickness (0.00 mm) 0.00 in.
Top Cover Surface Impregnated
Bottom Cover Compound White Nitrile
Bottom Cover Thickness (0.00 mm) 0.00 in.
Bottom Cover Surface Impregnated
Number of Plies 1
Overall Gauge (6.35 mm) 1/4 in.
Unit Weight 0.0550 lbs/PIW
Carcass Type Needled Polyester
Compound White Nitrile
Temperature Range -60 °F to 310 °F
Tension Rating 60 PIW

Custom Sizing & Fabrication

This belt is available cut to any required width and built to your specified overall length. Belt end options include mechanical lacing, finger splice, and endless vulcanized splice where applicable. Cleats, flanges, V-guides, and other fabrication options are available upon request. No standard sizes or pre-cut lengths are stocked — every order is custom fabricated.

Related Links

Request a Quote

All pricing is provided by quote only. To request a quote, complete the form below or contact Texas Belting & Supply directly.

Request a Quote

All belts are custom cut and fabricated to your specifications. Fill out the form below and a belting specialist will respond within one business day. You can also call us at 888-203-2358.