4 Ply CP30 Tan FS×FS

4 Ply CP30 Tan FS×FS

4 Ply CP30 Tan FS×FS — Power Transmission Conveyor Belts › CP30 Transmission Belts

Technical Overview

Commonly referred to as friction surface or transmission belting, this belt has been a standard choice for various conveyor applications, suitable for both slider bed and roller setups. Constructed with cotton and polyester fabric plies bonded with resilient rubber compounding, it is available either side to pulley, vulcanized endless or mechanically spliced. Ideal for industries such as agriculture, carton and paper packaging, elevator and milling, feed, industrial, lumber, manufacturing, printing and textiles.

4 Ply CP30 Tan FS×FS - Belt Construction Image

Selection Notes

  • Cover compound: Tan SBR.
  • 4-ply carcass construction.
  • Carcass type: Cotton-Polyester.
  • Operating temperature range: -40 °F to 250 °F.
  • Belt weight: 0.0940 lbs/PIW per inch of width.
  • Belt thickness: (4.76 mm) 3/16 in..
  • Tension rating: 120 PIW.

Frequently Asked Questions

What information do I need to request a quote?▼

To request a quote, provide: required belt width, overall belt length, belt end or splice type, quantity needed, and any application details such as operating temperature, materials conveyed, incline angle, and moisture or chemical exposure.

What is the lead time for custom belts?▼

Lead times vary based on specifications and current production schedules. Contact Texas Belting & Supply at 888-203-2358 for current availability and lead time estimates.

What splice and lacing options are available for this belt?▼

This belt is compatible with mechanical lacing and vulcanized splicing where applicable. Specify your required belt end type when submitting a quote request.

What is the operating temperature range for Part #10884?▼

The 4 Ply CP30 Tan FS×FS (Part #10884) has an operating temperature range of -40 °F to 250 °F. Operating outside this range may reduce belt life or performance. Contact Texas Belting at 888-203-2358 for high-temperature or cold-environment applications.

What is the minimum pulley diameter for Part #10884?▼

The minimum recommended pulley diameter for the 4 Ply CP30 Tan FS×FS is 3". This belt has an overall thickness of (4.76 mm) 3/16 in.. Using a pulley smaller than the minimum may cause premature belt failure or tracking issues.

Can I order Part #10884 in a custom width and length?▼

Yes. The 4 Ply CP30 Tan FS×FS is available custom cut to any required width and fabricated to your specified overall length. Texas Belting has no minimum order requirements. Belt end options include mechanical lacing, finger splice, and endless vulcanized splice. Request a quote with your exact dimensions.

Technical Specifications

Specification Value
Catalog # 40
Part # 10884
Top Cover Compound Tan SBR
Color Tan
Top Cover Thickness (0.00 mm) 0.00 in.
Top Cover Surface Friction Surface
Bottom Cover Compound Tan SBR
Bottom Cover Thickness (0.00 mm) 0.00 in.
Bottom Cover Surface Friction Surface
Number of Plies 4
Overall Gauge (4.76 mm) 3/16 in.
Unit Weight 0.0940 lbs/PIW
Carcass Type Cotton-Polyester
Compound Tan SBR
Temperature Range -40 °F to 250 °F
Tension Rating 120 PIW
Splice Options Step Splice
Suggested Fasteners Clipper Lace: #3; Alligator Lace: #25; Alligator Staple: #187

Custom Sizing & Fabrication

This belt is available cut to any required width and built to your specified overall length. Belt end options include mechanical lacing, finger splice, and endless vulcanized splice where applicable. Cleats, flanges, V-guides, and other fabrication options are available upon request. No standard sizes or pre-cut lengths are stocked — every order is custom fabricated.

Related Links

Request a Quote

All pricing is provided by quote only. To request a quote, complete the form below or contact Texas Belting & Supply directly.

Request a Quote

All belts are custom cut and fabricated to your specifications. Fill out the form below and a belting specialist will respond within one business day. You can also call us at 888-203-2358.