3 Ply 330 1/16in x Bare MOR

3 Ply 330 1/16in x Bare MOR

3 Ply 330 1/16in x Bare MOR — Heavy Duty Conveyor Belts › Oil Resistant MOR Belts

Technical Overview

Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice.

3 Ply 330 1/16in x Bare MOR - Belt Construction Image

Selection Notes

  • Cover compound: Black MOR.
  • 3-ply carcass construction.
  • Carcass type: Poly/Nylon.
  • Operating temperature range: -25 °F to 225 °F.
  • Belt weight: 0.1250 lbs/PIW per inch of width.
  • Belt thickness: (5.59 mm) 7/32 in..
  • Tension rating: 330 PIW.
  • Oil resistant.

Frequently Asked Questions

What information do I need to request a quote?▼

To request a quote, provide: required belt width, overall belt length, belt end or splice type, quantity needed, and any application details such as operating temperature, materials conveyed, incline angle, and moisture or chemical exposure.

What is the lead time for custom belts?▼

Lead times vary based on specifications and current production schedules. Contact Texas Belting & Supply at 888-203-2358 for current availability and lead time estimates.

What splice and lacing options are available for this belt?▼

This belt is compatible with mechanical lacing and vulcanized splicing where applicable. Specify your required belt end type when submitting a quote request.

What is the operating temperature range for Part #49524?▼

The 3 Ply 330 1/16in x Bare MOR (Part #49524) has an operating temperature range of -25 °F to 225 °F. Operating outside this range may reduce belt life or performance. Contact Texas Belting at 888-203-2358 for high-temperature or cold-environment applications.

What is the minimum pulley diameter for Part #49524?▼

The minimum recommended pulley diameter for the 3 Ply 330 1/16in x Bare MOR is 18.00". This belt has an overall thickness of (5.59 mm) 7/32 in.. Using a pulley smaller than the minimum may cause premature belt failure or tracking issues.

Can I order Part #49524 in a custom width and length?▼

Yes. The 3 Ply 330 1/16in x Bare MOR is available custom cut to any required width and fabricated to your specified overall length. Texas Belting has no minimum order requirements. Belt end options include mechanical lacing, finger splice, and endless vulcanized splice. Request a quote with your exact dimensions.

Technical Specifications

Specification Value
Catalog # 77g
Part # 49524
Top Cover Compound Black MOR
Color Black
Top Cover Thickness (1.59 mm) 1/16 in.
Top Cover Surface Smooth
Bottom Cover Compound Poly/Nylon
Bottom Cover Thickness (0.00 mm) 0.00 in.
Bottom Cover Surface Bare
Number of Plies 3
Overall Gauge (5.59 mm) 7/32 in.
Unit Weight 0.1250 lbs/PIW
Carcass Type Poly/Nylon
Compound Black MOR
Temperature Range -25 °F to 225 °F
Tension Rating 330 PIW
Properties Oil Resistant

Custom Sizing & Fabrication

This belt is available cut to any required width and built to your specified overall length. Belt end options include mechanical lacing, finger splice, and endless vulcanized splice where applicable. Cleats, flanges, V-guides, and other fabrication options are available upon request. No standard sizes or pre-cut lengths are stocked — every order is custom fabricated.

Related Links

Request a Quote

All pricing is provided by quote only. To request a quote, complete the form below or contact Texas Belting & Supply directly.

Request a Quote

All belts are custom cut and fabricated to your specifications. Fill out the form below and a belting specialist will respond within one business day. You can also call us at 888-203-2358.