Heavy-Duty Conveyor Belts
From the agricultural industry to airline applications, conveyor systems often require heavy-duty conveyor belts with superior durability and traction to reduce sustained wear over time. The conveyor belts we offer at Texas Belting & Supply consist of a highly abrasive-resistant rubber compound that fights off the onset of mildew while maintaining the friction necessary to carry all manner of items. Many of our heavy-duty conveyor belt materials also suffer minimal stretching, and our more specialty components are fire retardant for use in elevators and other high-stress environments.
Additionally, we carry timing belts and v-belts made with the same materials to provide you with even more diversity for your system setup. Browse our wide selection of industrial rubber conveyor belts below and request a quote for your purchase. We’ll work hard to supply you with the best heavy-duty conveyor belting possible for your industrial conveyor system.
150 1/32" x Bare
150 1/32" x Bare is popular in many agricultural applications. It also used in the airline industry and for conveying packaged good. It is a very good belt to use for rubber fabrication. It features an abrasion resistant cover. The belt can be used as a light duty general purpose belt.
150 1/32" x 1/32" STD
150 1/32" x 1/32" STD is used for potatoes as well as for live roller and many other general conveying applications. It is very popular in the agricultural industry.
150 1/8" x Bare MOR
150 1/8" x Bare MOR can be used in any application requiring a medium duty belt on a slider bed. It is an excellent belt for recycling applications, the glass industry and processing wood chips, paper and scrap. It features a medium duty, abrasion resistant top cover on a bare bottom cover. This belt can be used on a slider bed and is moderately oil resistant.
150 1/8" x 1/32" STD
150 1/8" x 1/32" STD is excellent for moderately abrasive applications. It is popular in the sand, gravel and lumber industries. It features a smooth top and bottom surface. The heavier cover with the high strength synthetic fabric results in a long wearing, mildew and rot resistant, low stretch belt.
150 1/8" x 1/16" STD
150 1/8" x 1/16" STD is excellent for moderate abrasive applications. It is popular in many industries including sand, gravel and lumber. It features a smooth top and bottom surface. The heavy cover and synthetic carcass result in a long wearing, mildew and rot resistant, low stretch belt.
220 1/16" X 1/16" M-MOR-SC
220 1/16" X 1/16" M-MOR-SC is an excellent belt for bucket elevator applications. Texas Belting can punch a wide variety of patterns for any bucket configuration in this belt. It is also ideal to convey oily grains or wood chips. It is static conductive, moderately oil resistant, fire retardant and MSHA approved for grain elevators. This belt is not approved for use in underground applications.
220 1/8" x 1/16" CR-MOR
220 1/8" x 1/16" CR-MOR is popular as the base belt in sidewall application due to its cross rigidity. It features the same benefits as the 220 1/8" x 1/16" MOR with additional cross rigidity due to 2 additional monofilament plies. This belt is primarily used for sidewall fabrication. Do not use this belt in a troughing application.
220 1/8" X 1/16" STD
220 1/8" X 1/16" STD is excellent for high abrasion applications. It is popular in the sand, gravel and rock industries as well as other heavy industrial applications. It features a smooth top and bottom surface. The heavy cover and high strength synthetic fabric results in a long wearing, mildew and rot resistant, low stretch belt.
220 3/16" x Bare MOR
220 3/16" x Bare MOR can be used in any application requiring a heavy duty belt on a slider bed. It is an excellent belt for recycling applications and the glass industry. It features a heavy duty, abrasion resistant top cover on a bare bottom cover. This belt can be used on a slider bed and is moderately oil resistant.
220 3/16 x 1/16 STD
220 3/16" x 1/16" STD is excellent for high abrasion applications. It is popular in the sand, gravel and rock industries as well as other heavy industrial applications. It features a smooth top and bottom surface. The heavy cover and high strength synthetic fabric results in a long wearing, mildew and rot resistant, low stretch belt.
220 1/8" x 1/16" MOR
220 1/8" x 1/16" MOR is used to convey oily grain and wood chips. It is popular in sewage treatment where moderate oil is a problem. It features the same qualities of the 220 3/16" x 1/16" STD except that it is Moderately Oil Resistant (MOR).
220 3/16" x 1/16" HT
220 3/16" x 1/16" High Temp is used in many high heat, high abrasion applications such as a foundry. It features a wide temperature range, with a high temperature up to 350F (fines) and 400F (lumps). When used in it's recommended service range it resists hardening and cracking. It is also highly ozone resistant.
220 3/16" x 1/16" Maximum HT
220 3/16" x 1/16" Maximum High Temp is used in many high heat, high abrasion applications such as a foundry. It features a wide temperature range, with a high temperature approximately up to 400F (fines) and 700F (lumps). When used in it's recommended service range it resists hardening and cracking. It is also highly ozone resistant.The product is also known as the 700 Degree belt.
220 3/16" x 1/16" HA
220 3/16" x 1/16" Hot Asphalt is popular carrying hot asphalt, oily grains and oil treated coal. It is also used in sewage treatment where oil can be a problem. It features a compound designed to service a combination of high temperature and oil. It has good abrasion resistance and retains flexibility in environments up to 350F in many applications.
330 1/16" X 1/16" M-MOR-SC
1/16" X 1/16" M-MOR-SC is an excellent belt for bucket elevator applications. Texas Belting can punch a wide variety of patterns for any bucket configuration in this belt. It is also ideal to convey oily grains or wood chips. This belt is static conductive, moderately oil resistant, fire retardant and MSHA approved for grain elevators. This belt is not approved for use in underground applications.
330 3/16" x 1/16" MOR
330 3/16" x 1/16" MOR is used to convey oily grain and wood chips. It is popular in sewage treatment where moderate oil is a problem. It features the same qualities of the 330 3/16" x 1/16" STD except that it is Moderately Oil Resistant (MOR).
330 3/16" x Bare MOR
330 3/16" x Bare Moderately Oil Resistant can be used in any application requiring a heavy duty belt on a slider bed. It is an excellent belt for recycling applications and the glass industry. It features a heavy duty, abrasion resistant top cover on a bare bottom cover. This belt can be used on a slider bed and is moderately oil resistant.
330 3/16" x 1/16" STD
330 3/16" x 1/16" STD is excellent for high abrasion applications. It is popular in the sand, gravel and rock industries as well as other heavy industrial applications. It features a smooth top and bottom surface. The heavy cover and high strength synthetic fabric results in a long wearing, mildew and rot resistant, low stretch belt.
330 3/16" x 1/16" HT
330 3/16" x 1/16" High Temp is used in many high heat, high abrasion applications such as a foundry. It features a wide temperature range, with a high temperature up to 350F (fines) and 400F (lumps). When used in it's recommended service range it resists hardening and cracking. It is also highly ozone resistant.
330 3/16" x 1/16" Maximum HT
330 3/16 x 1/16 Maximum High Temp is used in many high heat, high abrasion applications such as a foundry. MHT features a wide temperature range, with a high temperature approximately up to 400F (fines) and 700F (lumps). When used in it's recommended service range it resists hardening and cracking. It is also highly ozone resistant. This product is also known as the 700 Degree belt.
330 3/16" x 1/16" HA
330 3/16" x 1/16" Hot Asphalt is popular carrying hot asphalt, oily grains and oil treated coal. It is also used in sewage treatment where oil can be a problem. It features a compound designed to service a combination of high temperature and oil. It has good abrasion resistance and retains flexibility in environments up to 350F in many applications.
3 Ply 600 3/8 x Bare MOR
600 3/8" x Bare MOR can be used in any application requiring a heavy duty belt on a slider bed. The strong carcass is especially well-suited in the wood industry. It features a heavy duty, abrasion resistant top cover on a bare bottom cover. This belt can be used on a slider bed and is moderately oil resistant.
330 1/4" X 1/16" STD
330 1/4" x 1/16" STD is excellent for heavy duty abrasive applications. It is used to convey gravel, rock, ore, limestone and many other industrial materials. It is also used as an elevator belt. It features a smooth top and bottom surface. The heavy cover and high strength synthetic fabric results in a long wearing, mildew and rot resistant, low stretch belt.
3 Ply 600 3/8" x 1/8" STD
3 Ply 600 3/8" x 1/8" STD is excellent for heavy duty, high weight, abrasive applications. It is used to convey gravel, rock, ore, limestone and many other industrial materials. It is also used as an elevator belt. It features a 3 ply 600 lbs. PIW carcass and a smooth top and bottom surface. The beefy 3/8" thick top cover and high strength synthetic fabric results in a long wearing, mildew and rot resistant, low stretch belt.
440 1/4" x 1/16" STD
440 1/4" x 1/16" STD is excellent for heavy duty abrasive applications. It is used to convey gravel, rock, ore, limestone and many other industrial materials. It is also used as an elevator belt. It features a smooth top and bottom surface. The heavy cover and high strength synthetic fabric results in a long wearing, mildew and rot resistant, low stretch belt.
1/440 1/4" x 1/8" M-Flex Straight Warp
M-Flex is used in rough applications such as conveying ore and large stone. It excels in primary crusher applications. You will find this belt in industries as diverse as Log Handling, Recycling, Scrap Metal conveying and Rock Quarries. It features an impact and rip resistant straight warp construction. This carcass construction provides excellent lace retention as well as cut, gouge and tear resistance. This belt will also perform well in troughing applications.
Open Chevron 2 Ply 220 3/16" x 1/16"
Open Chevron 2 Ply 220 3/16" x 1/16" is popular in screening applications and where a tough, durable chevron pattern is required. It is available 26", 28", 31.5", 36", 42" and 48" wide.
220 1/8 x Bare Cleated Incline MOR
2 Ply 1/8" x Bare Cleated Incline MOR is used in bulk conveying where oil is a concern. This is a popular specification on Diamond Z and other grinders, and in the recycling industry. It features a 1/4" high, 6" wide chevron profile in a staggered pattern.
220 1/8" x 3/32" Cleated Incline SBR
220 1/8 x 3/32 Cleated Incline SBR is a popular bulk conveying belt. It features 1/4" high, 6" wide chevron profiles in a staggered pattern.
220 1/8" x 3/32" Cleated Incline MOR
220 1/8" x 3/32" Cleated Incline MOR is popular carrying bulk grain as well as gravel and crushed stone. It is used on road planners. It features a 1/4" high, 6" wide chevrons profile in a staggered pattern. The compound is MOR.
3 Ply 1/8" x Bare Cleated Incline MOR
3 Ply 1/8" x Bare Cleated Incline MOR is popular in bulk conveying where oil is a concern. This is a popular specification on Diamond Z grinders. It features a 1/4" high, 6" wide chevron profile in a staggered pattern.
330 1/8" x 1/16" Cleated Incline SBR
330 1/8" x 1/16" Cleated Incline SBR is a popular bulk conveying belt. It features 1/4" high, 6" wide chevron profiles in a staggered pattern.
2 Ply 150 Mini-Bite 1/32" x Bare
2 Ply 150 Mini-Bite 1/32" x Bare is popular for carrying gravel, dirt and sands. It is also used in the recycling industry. It features a 3/16" high by 1-3/4" wide bucket profile in a staggered pattern. The cleats are spaced on 2" centers across the belt and 1" centers down the length.
1/4" Skirtboard
1/4" Skirtboard is used as skirting on conveyors or as chute lining on bins and hoppers in the sand and aggregate industry. It features a durometer of 65 +/- 5 in a compound that resists abrasion.
3/8" Skirtboard
3/8" Skirtboard is used as skirting on conveyors or as chute lining on bins and hoppers in the sand and aggregate industry. It features a durometer of 65 +/- 5 in a compound that resists abrasion.
1/2" Skirtboard
1/2" Skirtboard is used as skirting on conveyors or as chute lining on bins and hoppers in the sand and aggregate industry. It features a durometer of 65 +/- 5 in a compound that resists abrasion.
3/4" Skirtboard
3/4" Skirtboard is used as skirting on conveyors or as chute lining on bins and hoppers in the sand and aggregate industry. It features a durometer of 65 +/- 5 in a compound that resists abrasion.
1" Skirtboard
1" Skirtboard is used as skirting on conveyors or as chute lining on bins and hoppers in the sand and aggregate industry. It features a durometer of 65 +/- 5 in a compound that resists abrasion.