Urethane Belting
Sometimes, component elasticity is the key to successfully running your equipment. With higher abrasion resistance and a greater elastic memory than other belting materials, urethane belting is perfect for power transmission and load conveyance applications. As such, they’re just what you’re looking for when you want to get the most efficiency out of a machine. Texas Belting & Supply sells a series of urethan belts, including timing belts, v-belts, and urethane flat belts.
In addition, we also sell a variety of modular plastic belting with stiffer, more solid frames that provide each project with extra durability. These belts are slip resistant and available in heavy-duty models to ensure they last. So, if you’re interested in our plastic or urethane belts, browse our selection below.
Round Urethane Belting
Cross-sections from 1/16" to 3/4". Durometers: 60A, 70A, 75A, 76A, 80A, 83A, 85A, 88A, 90A, 92A, 95A, 100A, 53D Comes in several different colors. Smooth or rough/matte finish. Easily cleaned. Available with UV Resistance, Food Grade, Detectable Materials, Anti-Static and more.
Flat Urethane Belting
Available in 031", .050" .063", .094", .125", .313" thicknesses. Comes up to 18" wide. Available in Black, Clear, and Orange. Durometers 78A, 83A, 85A, 87A, 92A, 95A. Made with food approved materials. Flat belts have much more surface contact area than round belts so slipping is virtually eliminated.
Urethane Profiles
Round Cord (O-ring cord, rod) extrusions. V-Cord (Vee cord) including groove top, T-top and topped with rough top (super grip). Flat cord (sheet) up to 34.5" wide. Hollow Cord Tubing extrusions. Oval Cord. Twisted Cord. Durometers (hardness): 60A thru 100A. Some with polyester reinforcement.
Band Saw Tires
Whether you’re setting up a new saw or replacing the tires on an old saw, the urethane tire installation process is quicker and easier for increased productivity and efficiency. All of this improves blade tracking and extends the life of your blade. Not only that, the tires are bright orange, which makes them super easy to inspect.
Flat Top Plastic Belting
Flat Top belting offers a solid top surface. FDA Approved materials and easy to clean. This belt can have multiple accessories adding to it such as flights, side walls, and grip modules. This belt comes in multiple pitches from 0.3", 0.5", 0.75", 1.0", 1.5", 1.75", 2.0", and 2.5". Belt comes in several colors. There is also a Heavy Duty version of this belt. Contact us for more information.
Non Slip Plastic Belting
This non-slip Plastic belting features 0% open area we also offer a perforated version. It is extremely stiff, Safe Non Slip profile for people mover applications. Standard belt material is anti-static, Electro conductive, and flame retardant materials available. Available in 0.3", 1", 2", and 2.5" Pitch.
Blue Flush Grid FDA Plastic Belting
Flush Grid Plastic Belting is excellent for cooling and draining, open hinge, food approved materials available. Belt comes in various colors. This belt can be used for straight, radial, and spiral configurations. Some flush grid belts are bi-directional. Material selection may affect belt width please contact us for actual dimensions. Comes in 0.3", 0.5", 0.75", 1.0", 1.1", 1.5", and 2.0". This belt also comes in a Heavy Duty version.
Vented Top Plastic Belting
The Vented Top Plastic Belting comes in several colors. Can be used in straight applications. With food approved materials, Bi-directional, Material selection may affect belt width — please contact us for actual dimensions. Comes is 1", 1.5", 1.75", and 2.0". This belt also comes in a Heavy Duty version.
Griptop Plastic Belting
Griptop Plastic Belting features grooved surface for high friction and less grip reduction by dirt and dust. Food approved materials available. Offers a 0% open area with the option to have a open area with griptop modules added. Available in multiple colors. This material can be used for ski-lift applications and other inclined material handling. This belt is also available in a Heavy Duty version. Comes in 0.5", 1.0", and 2.0" Pitch.
Roller Top Plastic Belting
Roller Top Belting is excellent for transferring products 15, 30, 45, or 90 degrees. Can be used in straight or radial applications. This belt comes in both a 0% open and and open configuration for cooling and drying. Comes in food approved materials. Available in various colors. Comes in 1.0", 2.0", and 2.2" Pitch.
Fluid Flow Plastic Belting
Fluid Flow comes in a 2" pitch it is made out of food approved materials, can be used in bi-directional applications. Material selection may affect belt width please contact us for actual dimensions. This belt comes in a flat, mini-cleat, and ribbed version.
Nub Top Plastic Belting
Nub Top Plastic Belting comes in both a 0% open area or a perforated flush option. This belt comes in food approved materials. This belt comes in a 0.5", 1", and 2".
Radius Plastic Belting
Radius belts are designed for easy conveying in curved applications. These belts can operate in both straight and radius applications. They come in flush grid, roller top, nub top, raised deck, griptop, We can add flights, side guards, hold-down devices, hold-down tabs, clip-on side guards, griptop modules, and lane dividers.
Spriral Plastic Belting
Spiral belts are specifically designed for low tension spiral applications in buffering, proofing, cooling or freezing lines. Boost product yields with non-stick, FDA/USDA approved, direct-contact plastic belt surfaces. Increase product throughput with greater loading capacity of lighter, stronger belts. Improve product's support, orientation, air-flow and drainage through multiple belt surface configurations and accessories. Reduce spiral down-time with reduced system wear, lower belt tension, less ice and frost build-up, and quick, thorough belt cleanability.
Straight Plastic Table Top Chain
Straight and radius running plastic chains with a large, flat support area for product conveying. Steel chains for heavy-duty or abrasive applications. Contact us for more information.
Low Back Pressure Chains LBP
Slat chains equipped with small rollers on top for low-pressure case or crate accumulation. Contact us for more information.
Snap On Chains
Two-piece chains with a steel roller base chain and plastic top plate. Radius running snap-on chain with tab. Steel base roller chain with snap-on plastic top plates. Contact us for more information.
Case Chain
Plastic chains mainly used for case handling and providing easy sanitation. Contact us for more information.
R900 Red Urethane
R900 Red Urethane is used in Metal Stamping, Recycling, Die Cutting and Brick Manufacturing applications. This is one of the toughest, most abrasive resistant belts available. The 85 Durometer urethane cover will resist cutting and abrasion from metal, glass, aluminum and other abrasive materials.
R1200 Urethane-Novex
R1200 Urethane-Novex is used in metal stamping, recycling, die cutting and brick manufacturing applications. This is one of the toughest, most abrasive bellts on the market. The 3/32" thick, 85 Durometer urethane cover will resist cutting and abrasion from metal, glass, aluminum and other abrasive materials.
Red URA-Stamp
Red URA-Stamp is used in metal stamping, recycling, die cutting, brick manufacture and any other high abrasion application. This is one of the toughest, most abrasion resistant belts on the market. The 2mm thick cover will resist cutting and abrasion from metal, glass, aluminum and other abrasive materials. This belt has good resistance to oil.
Poli Quad-Q
Poli Quad-Q is used in the cosmetic and pharmaceutical industries as well as for conveying extruded rubber and pastry products. Conforming to FDA, this belt is widely used in the food industry. This belt was specifically designed to discharge the conveyed product without buildup and to provide a flat carrying surface. This belt is thin, lightweight and has a cross-rigid monofilament carcass.
Mono-Tote-G
Mono-Tote-G is good in incline applications such as conveying totes. It also is a good metering/singulation belt. This belt features an exceptionally soft compound with molded grooves that self clean when going around pulleys. The Urethane compound makes this belt abrasion resistant. It is also anti-static.
Urethane 8M/2U/BU
Urethane 8M/2U/BU is an ideal belt for package handling, manufacturing, recycling, high wear applications and in paper and box plants. This belt features a tough abrasion resistant cover that will transverse small pulleys. This belt will lay flat and is permanently anti-static.
2 PLY U5C Urethane - Green
2 PLY U5C Urethane - Green is a general purpose conveying and processing belt. This belt features a smooth non-adhesive top cover. It is anti-static and conforms to FDA.
2 PLY U8C Urethane - Green
2 PLY U8C Urethane - Green is a general purpose conveying and processing belt. This belt features a smooth non-adhesive top cover. It is anti-static and conforms to FDA.
Urethane 8M/8U/BU
Urethane 8M/8U/BU is a tough, abrasion resistance belt with excellent oil resistance. It is popular for de-stackers in metal stamping, aluminum recycling, glass and industrial applications requiring gouge resistance. This belt features a durable urethane cover on 2 plies of cross rigid, low stretch monofilament. The special woven monofilament bottom ply enables the belt to run at a very low noise level on a slider bed. It's urethane skim makes this belt more durable than many others on the market. This belt will navigate small pulleys, lay flat in wide or narrow applications and track on short center distances. This belt is anti-static.
Urethane-HD 12S/10U/BU
Urethane 12/S/10U/BU is used in metal stamping, the recycling of glass cullet, die cutting and brick manufacturing among other applications. The belt has a 2 ply polyester carcass with a tough Urethane cover. The belt will handle impact and abrasion form metal, glass, aluminum, steel rule dies and other abrasive materials. This belt also has good oil resistance. This belt is anti-static.
Poli-Glide 3M/2U/BU
Poli-Glide is used in candy, chocolate and confectionery processing. It is also used in many medium food processing applications such as the cheese, bakery, fish, meat, poultry and vegetable industries. This belt is a lightweight 1 ply monofilament construction that will negotiate small pulleys. The urethane compound is oil, animal fat and grease resistant. It is easy to clean and will lay flat. This belt is anti-static.
Poli-Glide A/S
Poli-Glide A/S is used in candy, chocolate and confectionery processing. It is also used in many medium food processing applications such as the cheese, bakery, fish, meat, poultry and vegetable industries. This belt is a lightweight 2 ply monofilament construction that will negotiate small pulleys. The urethane compound is oil, animal fat and grease resistant. It is easy to clean and will lay flat. This belt is anti-static.
Poli-Glide 5S/2U/FS
Poli-Glide 5S/2U/FS is widely used in bakeries and candy plants. Primary uses are enrobers/cooling lines/cheese mfg./poultry plants/dough transfers. This belt features a two ply spun polyester with a thin white urethane top cover. It can transverse the smallest pulleys while maintaining cross rigidity. The urethane cover is easily cleaned.
Poli-Glide 5M/FP/FP
Poli-Glide 5M/FP/FP is one of the most widely used bakery belts today. The surface on the top and bottom prevents the conveyed product from sticking. It is an excellent belt for raw or cooked dough, baked goods, vegetables and cookies. Do not use with chocolate. This is a two ply spun polyester with a urethane skim between the plies. The top and bottom surface is treated with urethane for extra life. The belt will handle the smallest pulleys.