Modutech MD254 Series — 1" Medium Duty Belts
MD254 Series® — 1" Medium Duty Belts
Thicker, stronger modules than the EC254 for applications requiring higher belt tension and heavier loads. Up to 35,200 N/m in Acetal — 40% stronger than the economy EC254 at the same 1" pitch.
MD254 Belt Models
Two models — closed flat top and flush grid. Click to download the full spec sheet.
MD254 C
Medium-duty flat top for higher belt tensions and heavier product loads. 70% faster sanitation with easy-clean surface. Full range of flights, sidewalls, and hold-down tabs for incline applications.
Download PDF
MD254 FG
Medium-duty flush grid with 33% open area for maximum drainage and airflow under heavy loads. Ideal for cooling, freezing, and wash-down lines where both strength and ventilation matter. Stainless steel pins available for high-temperature applications.
Download PDFTechnical Specifications
Both MD254 models share the same 25.4mm (1") pitch and Ø5mm self-lock rods. Compatible with MD254 series sprockets.
| Specification | MD254 C | MD254 FG |
|---|---|---|
| Surface | Closed / Flat Top | Flush Grid (33% Open) |
| Open Area | 0% | 33% |
| Pitch | 25.4mm / 1" | 25.4mm / 1" |
| Thickness | 10mm / 0.394" | 10mm / 0.394" |
| Min Width | 50mm / 1.97" | 50mm / 1.97" |
| Rod | 5mm Self Lock | 5mm Self Lock |
| Flights | T25–T100, TC50, TCH50, TNC75, TNC100 | T25–T100, TC50, TCH50 |
| Sidewalls | h25–h100 | h25–h100 |
| Modules | 200, 100, 50, 33mm | 200, 100, 50, 33mm |
Belt Strength & Temperature Range
MD254 delivers significantly higher belt strength than EC254 at the same 1" pitch. All materials FDA & EU 10/2011 compliant.
| Material | Strength (N/m) | Strength (lb/ft) | Temp Min | Temp Max | Weight (C / FG) |
|---|---|---|---|---|---|
| Polypropylene (PP) | 19,800 | 1,356 | +5°C / +41°F | +90°C / +194°F | 5.5 / 4.6 kg/m² |
| Polyethylene (PE) | 9,900 | 678 | -73°C / -99°F | +66°C / +151°F | 5.8 / 5.1 kg/m² |
| Acetal (POM) | 35,200 | 2,411 | -43°C / -45°F | +110°C / +230°F | 8.4 / 7.1 kg/m² |
MD254 vs EC254 — Which 1" Pitch Belt?
Both share the same 1" pitch, but the MD254 is built for heavier applications.
| Feature | MD254 (Medium Duty) | EC254 (Economy) |
|---|---|---|
| Max Strength (POM) | 35,200 N/m | 25,150 N/m |
| Max Strength (PP) | 19,800 N/m | 15,400 N/m |
| Module Construction | Thicker, reinforced | Standard economy |
| Models Available | 2 (Flat Top, Flush Grid) | 5 (Flat, Non-Tab, Perf, Radius, Tight Radius) |
| Radius Capability | No | Yes (EC254 R, EC254 TR) |
| Best For | Heavy loads, high tension, long runs | General food processing, packaging, spirals |
Need radius capability at 1" pitch? See the EC254 Series with R and TR radius models.
Standard Belt Widths
Standard increments of 50mm. Non-standard increments of 16.6mm available on request.
| Width (mm) | Width (inch) | PP-PE | POM | Tolerance |
|---|---|---|---|---|
| 200 | 7.87" | ±1mm | ||
| 250 | 9.84" | ±1mm | ||
| 300 | 11.81" | ±2mm | ||
| 400 | 15.75" | ±2mm | ||
| 500 | 19.69" | ±2mm | ||
| 600 | 23.62" | ±3mm | ||
| 700 | 27.56" | ±3mm | ||
| 800 | 31.50" | ±3mm | ||
| 900 | 35.43" | ±4mm |
Applications
Meat portioning, cheese cutting, heavy produce lines. MD254 C flat top handles loads that exceed EC254 capacity without belt sag or stretch.
MD254 FG with 33% open area for heavy-load cooling. PE material rated to -73°C. SS pins available for extended high-temp use.
Higher belt tension capacity means longer conveyor runs without intermediate drives. POM at 35,200 N/m handles extended distances.
Full flight range (T25–T100) and sidewalls up to 100mm. Heavier module construction resists flight breakage under load.
Frequently Asked Questions
When should I choose MD254 over EC254?
Choose MD254 when your application involves heavier product loads, higher belt tension, or longer conveyor runs than the EC254 can handle. MD254 delivers 35,200 N/m in POM versus 25,150 N/m for EC254 — a 40% increase. If you need radius capability, the EC254 R and TR models are the only 1" pitch radius options.
What is the maximum open area available in the MD254 series?
The MD254 FG offers 33% open area with a flush grid design — the highest open area in any Modutech 1" pitch medium-duty belt. For higher open area at 1" pitch, the EC254 TR provides 38% but at economy-level strength.
Can I use stainless steel pins with MD254 belts?
Yes. The MD254 FG supports stainless steel pins for high-temperature applications or environments requiring enhanced corrosion resistance. Contact Texas Belting for SS pin availability and pricing.
What flight and sidewall options are available?
MD254 C supports flights T25, T50, T75, T100, TC50, TCH50, TNC75, and TNC100, plus sidewalls from h=25mm to h=100mm. MD254 FG supports T25–T100, TC50, and TCH50 with the same sidewall range. Both models offer the widest accessory range of any 1" medium-duty belt.
Explore More Modutech Belts
Need Help Choosing Between MD254 and EC254?
Tell us your product weight, conveyor length, and operating conditions. We'll recommend the right series, model, and material for your line.
Texas Belting & Supply · 15603 West Hardy Street, Houston TX 77060