Conveyor Belts

Texas Belting carries the full range of industrial conveyor belts: general purpose rubber and PVC, heavy-duty multi-ply rubber, FDA food grade, incline and decline, urethane and plastic, modular, elevator, and specialty belting. Every belt is available cut to length with same-day quoting. We also fabricate custom conveyor belts, endless belts, and spliced belts at our Houston facility.

Not sure which belt your conveyor needs? Send us a photo, a piece of the old belt, or your conveyor specs (width, length, material conveyed, incline angle) and our team will recommend the right belt. Call 888-203-2358 or email sales@texasbelting.com.

Need a conveyor belt quote? Send us your specs or a photo of the existing belt.

Request a Quote

Shop Conveyor Belts by Type

General Purpose Rubber, PVC, neoprene, urethane, and nylon. Multi-ply. FBS, COS, CBS. The broadest category for standard conveying. Heavy Duty Rubber Multi-ply rubber with abrasion, impact, heat, oil, and cut resistant covers. Mining, aggregate, bulk material. Light Duty PVC and thermoplastic belts for package handling, sorting, accumulation, and light manufacturing. Food Grade FDA and USDA approved. Meat, bakery, produce, dairy, and confectionery. Oil resistant, washdown ready. Incline / Decline Rough top, diamond top, wedgegrip, chevron, cleated, and sidewall belts for angles from 10 to 90 degrees. Urethane & Plastic Metal stamping, recycling, die cutting, high abrasion. Modular plastic for food, pharmaceutical, and spiral systems. Modular Belts Interlocking plastic belt modules. Curves, spirals, side transfers. Food grade, high heat, and chemical resistant options. Elevator Belts (PVC) CBS (Cover Both Sides) PVC belts for grain elevators and light-duty bucket elevators. Pre-punched bolt holes available. Elevator Belts (Rubber) Heavy-duty rubber CBS belts for cement, aggregate, and heavy bucket elevator applications. Specialty Belts Interwoven PVC, sidewall, air slide, folder gluer, machine tape, bandsaw tires, and custom fabrication.

Shop by Material

Material Best For Key Properties
Rubber (SBR) General purpose, bulk material, aggregate, mining Abrasion resistant, flexible, impact tolerant, wide temperature range
PVC Package handling, food processing, light manufacturing Versatile, oil resistant, FDA options, anti-static options, cost effective
Neoprene Oily environments, agricultural, food with oil exposure Oil, grease, and heat resistant. Better chemical resistance than SBR rubber.
Urethane Metal stamping, recycling, die cutting, high abrasion Cut and gouge resistant, oil resistant, anti-static
Nitrile (NBR) Oily food processing, animal fat, vegetable oil RAV compound resists animal, vegetable, and mineral oils
Silicone / PTFE Bakery, high heat, non-stick release applications Extreme temperature resistance, excellent release properties
Modular Plastic Food processing, pharmaceutical, curves, spirals Easy cleaning, modular replacement, chemical resistant, FDA

Conveyor Belts by Industry

Each industry page includes recommended belt types, key belt properties for that environment, and application-specific guidance.

Food Processing FDA/USDA approved belts for meat, poultry, bakery, produce, dairy, and confectionery. Washdown and CIP ready. Construction Heavy-duty rubber for aggregate, concrete, brick, lumber, demolition. Impact, abrasion, and cut resistant. Agriculture Grain handling, feed processing, produce harvesting, seed cleaning. FDA, anti-static, bucket elevator belts. Corrugated & Printing Folder gluer belts, machine tape, power transmission, and material handling for box plants and print shops. Distribution & Logistics Package handling, sorting, diverting, and accumulation for warehouses and fulfillment centers. Energy Coal handling, power plant ash, biomass, and fuel material conveying. Heat and abrasion resistant. General Manufacturing Assembly lines, parts handling, inspection conveyors, and transfer systems across all manufacturing sectors. Mail & Parcel Processing Sorting, stacking, and transporting mail and parcels. High speed, low noise, abrasion resistant. Pharmaceutical & Chemical Chemical resistant, anti-static, cleanroom compatible. Tablet, capsule, and packaging line conveying. Automotive & Metal Stamping Urethane and heavy-duty rubber for stamped parts, scrap handling, and assembly line transport. Foundry & Steel High heat, abrasion resistant rubber for castings, slag, scrap metal, and hot material handling.

Conveyor Belt Construction Quick Guide

Conveyor belts are defined by their cover type (what the top and bottom surfaces look like) and their carcass (the internal reinforcement layers). Understanding these terms helps you specify the right belt.

Cover Types

Abbreviation Meaning Description
COS Cover One Side Smooth cover on top, bare fabric bottom. The most common type. Good for slider bed conveyors.
CBS Cover Both Sides Smooth cover on top and bottom. Required for live roller conveyors and bucket elevator applications.
FBS Friction Both Sides Fabric texture on both sides (no smooth cover). Designed for slider bed conveyors. Lower friction on the bed surface.
Rough Top Textured top surface Raised texture for grip on incline/decline conveyors. Available in rubber and PVC. Various patterns.

Common Carcass Types

Carcass Description Best For
2-Ply Polyester Two layers of polyester fabric. Standard for light to medium duty. General purpose, package handling, light manufacturing
3-Ply Polyester Three layers. Higher tensile strength than 2-ply. Medium to heavy duty, longer conveyors, heavier loads
Straight Warp Single-ply with straight-running warp yarns. Low stretch, high troughing ability. Bulk material, mining, aggregate, long-distance conveying
Monofilament Thin, cross-rigid carcass. Low moisture absorption. Food processing, wet environments, small pulleys, lightweight conveying
Nylon/Polyester (EP) Polyester warp, nylon weft. High impact and fatigue resistance. Heavy duty, mining, high-impact loading zones
Not sure what construction you need? Tell us what you are conveying, the conveyor length and width, whether it is a slider bed or live roller, the incline angle (if any), and any special requirements (FDA, heat, oil, anti-static). We will recommend the correct belt construction. Call 888-203-2358.

Custom Fabrication & Services

Texas Belting fabricates conveyor belts at our Houston facility. We do not just sell rolls of belting. We build belts ready to install on your conveyor.

  • Cut to length: Any belt, any width, any length. Specify your dimensions and we cut it.
  • Splicing: Finger splice (vulcanized), overlap splice, and mechanical lacing (Clipper, Alligator, plate). See our Conveyor Belt Splicing Guide.
  • Endless belts: Factory-spliced into a continuous loop for your conveyor dimensions.
  • Elevator belts: Pre-punched bolt hole patterns for bucket attachment. See our Elevator Belt Selection page.
  • Custom cleats and sidewalls: Molded or welded cleats from 1/2" to 6" tall in rubber, PVC, or urethane. Corrugated sidewalls from 1" to 16".
  • Pulley lagging: Rubber lagging applied to drive pulleys for improved belt traction.
  • Bandsaw tires: Custom urethane bandsaw tires for woodworking and metalworking.

Conveyor Belt Guides & Resources

Belt Identification Guide How to identify V-belts, timing belts, and conveyor belts by part number, measurement, or photo. Belt Failure Troubleshooting Diagnose belt failures across all belt types. Root cause analysis with corrective actions. Conveyor Belt Splicing Guide Mechanical fasteners and splicing methods. Clipper, Alligator, plate, and vulcanized options. Belt Tracking Problems Causes of belt mistracking and how to fix them. Alignment, tension, and structural issues. Pulleys, Idlers & Components Conveyor pulleys, idlers, belt fasteners, impact beds, tracking devices, and elevator buckets.

Why Buy Conveyor Belts from Texas Belting?

  • Full inventory in Houston: Rubber, PVC, food grade, urethane, modular, elevator, incline, and specialty belting in stock and ready to ship or fabricate.
  • Custom fabrication on site: We cut, splice, punch, cleat, and build conveyor belts at our Houston facility. Not a drop-ship operation.
  • Same-day quoting: Send us your specs and we typically quote within the hour during business hours.
  • Expert application support: FBS vs. COS vs. CBS? FDA vs. USDA? 2-ply vs. straight warp? We know belt construction and will match the right belt to your conveyor.
  • Authorized distributor for 30+ manufacturers: Belt Service Corporation, Intralox, Diesel Belting, and many more. Factory-backed products with full manufacturer warranties.
  • Competitive pricing: We buy direct from manufacturers and price below most OEM replacement and big-box industrial suppliers.
  • Nationwide shipping: Same-day shipping on stocked items. Expedited freight available for emergency orders.

Frequently Asked Questions

What types of conveyor belts does Texas Belting carry?▼

We carry general purpose rubber and PVC, heavy-duty multi-ply rubber, FDA food grade, incline/decline (rough top, chevron, cleated, sidewall), urethane, modular plastic, elevator (PVC and rubber CBS), interwoven PVC, air slide, folder gluer and machine tape, PTFE/silicone, and custom fabricated belts. If it is a conveyor belt, we stock it or can source it.

How do I know which conveyor belt I need?▼

The correct belt depends on what you are conveying (material type, weight, temperature), your conveyor configuration (slider bed or live roller, flat or inclined, belt width and length), and any regulatory requirements (FDA, anti-static, fire resistant). The simplest approach is to tell us your application and conveyor specs, and we will recommend the right belt. If replacing an existing belt, send us a photo or piece of the old belt.

What is the difference between COS, CBS, and FBS?▼

COS (Cover One Side) has a smooth cover on top and bare fabric on the bottom. It is the most common type for slider bed conveyors. CBS (Cover Both Sides) has smooth covers on top and bottom and is required for live roller conveyors and bucket elevators. FBS (Friction Both Sides) has fabric texture on both sides with no smooth cover, designed for slider beds where lower bed friction is needed.

Do you carry FDA food grade conveyor belts?▼

Yes. We carry a full range of FDA-approved conveyor belts in PVC, urethane, nitrile (RAV), modular plastic, and PTFE/silicone for meat, poultry, bakery, produce, dairy, confectionery, and pharmaceutical applications. Detectable belting is also available for HACCP-compliant facilities.

Can you make a custom conveyor belt for my system?▼

Yes. We fabricate conveyor belts at our Houston facility. Services include cut to length, finger splice, overlap splice, mechanical lacing, endless belt fabrication, bolt-hole punching for elevator belts, custom cleat and sidewall attachment, and pulley lagging. Send us your conveyor dimensions and requirements for a quote.

What conveyor belt do I need for an incline?▼

It depends on the incline angle. For 10 to 20 degrees, rough top or impression top belts work well. For 20 to 35 degrees, diamond top/wedgegrip or steepgrade belts. For 35+ degrees, cleated or sidewall belts are required. See our Incline/Decline Belting page for a complete angle-to-belt guide.

How quickly can you quote and ship a conveyor belt?▼

Quotes are typically returned within the hour during business hours. Stocked belts cut to length ship same day or next day depending on fabrication requirements. Custom cleated, sidewall, and endless belts typically ship within 2 to 5 business days depending on complexity. Emergency expediting is available. Call 888-203-2358.

Do you also carry V-belts and timing belts?▼

Yes. Texas Belting is a full-service industrial belting supplier. In addition to conveyor belts, we carry V-belts (classical, cogged, narrow wedge, banded, FHP) and timing belts (HTD, GT, trapezoidal, urethane, open-end) from Gates, Continental, Bando, Megadyne, and Diesel Belting.

Need a Conveyor Belt?

Texas Belting stocks the full range of industrial conveyor belts and fabricates custom belts at our Houston facility. Tell us what you are conveying and we will get you the right belt.

Request a Quote Call 888-203-2358